Gskill F3-17000CL8-D

Printable View

Show 100 post(s) from this thread on one page

04-01-2011, 07:19 PM
Hondacity

Quote:

Originally Posted by Dumo

32m no go at those settings, probly need more Vs.

I killed my 57X cpu...condensation:(

i learnt that the hardway ... now im waterproof :D
04-01-2011, 07:41 PM
Elmy

http://img685.imageshack.us/img685/4...7241t53ghz.jpg

Uploaded with ImageShack.us

Just ran this .... This memory is awesome :-)
04-02-2011, 04:38 AM
theoldtimer

Quote:

Originally Posted by Dumo

32m no go at those settings, probly need more Vs.

I killed my 57X cpu...condensation:(

I'm sorry to hear that Dumo. :( I hope you find an X59 with a 110 BCLK chip to replace it my friend.:yepp:
09-07-2011, 07:10 AM
easegantini

Hey, guys! I want to buy another kit of 2133 8-9-8-24.
Is there someone that lives in Germany or Australia to help me?
I found online stores at these countries.
Thankss!
09-07-2011, 10:04 AM
theix

Quote:

Originally Posted by easegantini

Hey, guys! I want to buy another kit of 2133 8-9-8-24.
Is there someone that lives in Germany or Australia to help me?
I found online stores at these countries.
Thankss!

Check out www.memoryc.com. It's out of stock right now but you can put in your email in for stock notification email.
09-07-2011, 11:51 AM
easegantini

Quote:

Originally Posted by theix

Check out www.memoryc.com. It's out of stock right now but you can put in your email in for stock notification email.

Thank you! I just did that. :up:
09-07-2011, 12:03 PM
websmile

You won't be very successful at least in germany, the mems are listed but not available, afaik there is only amazon de left with a single kit.
09-28-2011, 07:14 PM
Dumo

2133 CL8D-4GBXMD's pcb...

http://img192.imageshack.us/img192/3...nshot029cd.jpg

Same pcb and still a lot of stock @ Newegg...The only drawback is you probly have to bin it:D

http://www.newegg.com/Product/Produc...82E16820231275

http://img819.imageshack.us/img819/4...nshot030px.jpg

http://www.newegg.com/Product/Produc...82E16820231276

http://img89.imageshack.us/img89/389...enshot031i.jpg
09-29-2011, 12:04 AM
l0ud_sil3nc3

@ Dumo

good looking out, that is a good find especially since this memory is almost impossible to find:up:
09-29-2011, 12:53 AM
websmile

Don't expect too much of these kits, same pcb doesn't mean same ics, the best kit of the 1333 c7 I had did 1068 9-10-9 on sb with 1,63v, not scaling above this v. nonetheless these are relatively good mems at this price especially
09-29-2011, 01:34 AM
Dumo

Gskill flooded newegg with 100s of these 1333 sets which probly 2133 rejects.

I'll try a few sets just in case Gskill binner misplaced a few 2133. Lol
09-29-2011, 07:40 AM
PolRoger

@Dumo

Please let us know if you find some worthy (hidden) gems.
10-01-2011, 02:31 AM
Dumo

Quote:

Originally Posted by PolRoger

@Dumo

Please let us know if you find some worthy (hidden) gems.

Got a few of C7..Different PCB (single sided) good for 24/7daily rig @ stock spd only:)

2133 C8 new batch back in stock...black pcb:(

http://www.newegg.com/Product/Produc...82E16820231450

New batch on top...

http://img11.imageshack.us/img11/885...nshot003gg.jpg

http://img577.imageshack.us/img577/8...nshot002vr.jpg
10-01-2011, 04:38 AM
PolRoger

It seems only the early samples had the green pcb. Even my second kit from NewEgg back in mid-march had the black pcb but at least the price has come down... back then they were still $159.99 per kit! Does your green kit seem to have better quality ic's and clock higher?
10-01-2011, 06:06 AM
badatgames18

dumo are the black pcb still bbse?

tell me quick before they're all gone again :(
10-01-2011, 07:55 AM
Dumo

@Bad...I havent strip it off

@PR...So far no 6-9-6 2133+ with the black ones

Heres black pcb C8 @ 1.72V and UD7-B3.

This 2600K max @ 105.6 BCLK

Will play with AMD next

http://img851.imageshack.us/img851/3...nshot005hb.jpg
10-01-2011, 08:23 AM
PolRoger

Can your new kit do 7-9-7-24 2133 with ~ 1.65v?
10-01-2011, 08:58 AM
hiwa

Quote:

Originally Posted by Dumo

@Bad...I havent strip it off

killed some black pcb to see the ICs, don't do that, timing can prove the ic
10-01-2011, 09:38 AM
Dumo

Quote:

Originally Posted by hiwa

killed some black pcb to see the ICs, don't do that, timing can prove the ic

I never want to mess with opening hsf since I killed my naked gem FX57. Lol
10-01-2011, 02:35 PM
ZenEffect

heh, i only take of the heatspreader on certain memories. these are too nice to risk damaging them, so leave the heatspreaders on and trust you have bbse.

anyways, some c8 fun? (is c8 fun?)

heh. 8gb.

http://i48.photobucket.com/albums/f2.../Capture-7.jpg
10-01-2011, 10:29 PM
Dumo

Quote:

Originally Posted by PolRoger

Can your new kit do 7-9-7-24 2133 with ~ 1.65v?

Yep, with slight bump on VTT and Vcsa

Quote:

Originally Posted by ZenEffect

heh, i only take of the heatspreader on certain memories. these are too nice to risk damaging them, so leave the heatspreaders on and trust you have bbse.

anyways, some c8 fun? (is c8 fun?)

Nice run Zen, are those black pcb?

Heres black pcb @ 2133+ 1.64v and a 2600K with hot cores..

http://img90.imageshack.us/img90/134...nshot008wi.jpg

http://img198.imageshack.us/img198/1...nshot009mk.jpg
10-02-2011, 12:45 AM
l0ud_sil3nc3

Quote:

Originally Posted by Dumo

Got a few of C7..Different PCB (single sided) good for 24/7daily rig @ stock spd only:)

2133 C8 new batch back in stock...black pcb:(

http://www.newegg.com/Product/Produc...82E16820231450

New batch on top...

thanks Dumo, just grabbed another two sets of these, and I just found some of the 2200 7-10-10-27 Ripjaw X, so I should be good to go for SB-E

Quote:

Originally Posted by ZenEffect

heh, i only take of the heatspreader on certain memories. these are too nice to risk damaging them, so leave the heatspreaders on and trust you have bbse.

anyways, some c8 fun? (is c8 fun?)

heh. 8gb.

http://i48.photobucket.com/albums/f2.../Capture-7.jpg

what vccio and vtt as well as vdimm for that?

the speed is nice especially for 8GB
10-02-2011, 01:14 AM
Leeghoofd

Any real stability test on them clocks zeneffect ? are they 24/7 stable at them clocks ?
10-02-2011, 01:32 AM
websmile

Quote:

Originally Posted by l0ud_sil3nc3

thanks Dumo, just grabbed another two sets of these, and I just found some of the 2200 7-10-10-27 Ripjaw X, so I should be good to go for SB-E

what vccio and vtt as well as vdimm for that?

the speed is nice especially for 8GB

Nice shopping trip, luckily I have around 50 gb BBSE and Hyper left running and some 2200 c7 psc, these are all not available in europe so I stopped selling yesterday after getting rid of my last 2000 c7 hypers. and I agree with leeghoof, wprime is no ram test
10-02-2011, 01:55 AM
l0ud_sil3nc3

Quote:

Originally Posted by websmile

Nice shopping trip, luckily I have around 50 gb BBSE and Hyper left running and some 2200 c7 psc, these are all not available in europe so I stopped selling yesterday after getting rid of my last 2000 c7 hypers. and I agree with leeghoof, wprime is no ram test

no kidding, 2 kits of the 2133 8-9-8 for $240 shipped was a no brainer.

I also have some GTX3 coming to add to the 2200 7-10-10-27 PSC kits, but sadly no hypers in my arsenal

32M is what is needed to see memory stability, regardless, the newer kits seem to clock well also, not sure how they compare to the older ones but I can't wait to see.
10-02-2011, 09:40 AM
Dumo

Quote:

Originally Posted by websmile

and I agree with leeghoof, wprime is no ram test

Probly we have different goal when it comes to ram. For me stability is not a priority. Good ram and mobo will served as base of a benching rig.

Try to find good clocking 2600K already time consuming, binning ram is the least of priority
10-02-2011, 09:44 AM
ZenEffect

Quote:

Originally Posted by Leeghoofd

Any real stability test on them clocks zeneffect ? are they 24/7 stable at them clocks ?

they are stable enough to bench with, as far as 24/7 clocks im just running then at 2133 8-9-8-20 8gb. there is no real advantage to running 2200+ imho so i didnt really check.

@ dumo

2 black pcb, 2 green pcb. both of these kits clock the same though.
10-02-2011, 10:05 AM
Dumo

Quote:

Originally Posted by ZenEffect

@ dumo

2 black pcb, 2 green pcb. both of these kits clock the same though.

Yep, it seems no difference here too Zen
10-02-2011, 10:12 AM
ZenEffect

Quote:

Originally Posted by Dumo

Yep, it seems no difference here too Zen

why does everybody want the green pcb? 8 layer? if blacks and greens clock to the point where the cpu/imc is the only real limiting factor, then whats the practical diff?

If i could afford it, id pick up another set or 2. these are by far the best kit of benching ram that have come out for sandybridge platform.
10-02-2011, 10:40 AM
websmile

Quote:

Originally Posted by Dumo

Probly we have different goal when it comes to ram. For me stability is not a priority. Good ram and mobo will served as base of a benching rig.

Try to find good clocking 2600K already time consuming, binning ram is the least of priority

Good ram should do at least 32M or 3d stable;) wprime isn't even as good a test for bench mems as 1M :D - and btw, ram doesn't influence wprime score at all, 1333 and 2133 are all the same results ^^. I didn't ask for prime but was only interested if these are able to do benches that at least get some load on the mems, wprime is like screen stable :)
10-02-2011, 11:07 AM
Dumo

Quote:

Originally Posted by websmile

Good ram should do at least 32M or 3d stable;) wprime isn't even as good a test for bench mems as 1M :D - and btw, ram doesn't influence wprime score at all, 1333 and 2133 are all the same results ^^. I didn't ask for prime but was only interested if these are able to do benches that at least get some load on the mems, wprime is like screen stable :)

I care less with 32m and those stability stress tests, only bench 3Ds for fun and it served me well:)
These rams go to temporary benching rig anyway...not for 24/7 stable daily machine.

This is good enough for me...

http://img23.imageshack.us/img23/8623/621507.jpg

B/way heres with AMD rig...

http://img8.imageshack.us/img8/940/screenshot003rs.jpg
10-02-2011, 11:40 AM
badatgames18

@ dumo... thanks! i think i will get these soon
if i may ask what ram do you use for 24/7? i use just some 1600cl9 patriot (16gb).. :shrug:
was a cheap 2133 16gb kit lol

Quote:

Originally Posted by l0ud_sil3nc3

thanks Dumo, just grabbed another two sets of these, and I just found some of the 2200 7-10-10-27 Ripjaw X, so I should be good to go for SB-E

if i may ask... where did you find the cl7 ripjaws x? they seem to clock better than the cl7 pi counterparts...
i have 8gb of gskill pi 2200cl7
4gb gtx3
4gb of some old 2000cl9 trident bbse
and for 24/7 i have 16gb of some patriot ram (i think hynix bfr)

for quad channel i think i am only able to use the gskill pi :( gotta buy 2 sets of these... hopefully they don't sell out by tuesday
10-02-2011, 01:38 PM
Oliver

Hey Dumo, hows kicking?

Thanks for information, lets see if any will hit stock in EU
10-04-2011, 06:32 AM
PolRoger

NewEgg now went back "out-of stock" on this kit.
10-04-2011, 09:02 AM
l0ud_sil3nc3

Quote:

Originally Posted by PolRoger

NewEgg now went back "out-of stock" on this kit.

I know it didn't even last a week, hope they restock soon.
10-04-2011, 02:32 PM
mikecdm

Hope they are still quality ram.
10-05-2011, 12:06 AM
l0ud_sil3nc3

Quote:

Originally Posted by mikecdm

Hope they are still quality ram.

I will post results when they get here but here are my older sticks

2140 6-9-6
http://i.imgur.com/tmVYI.png
10-05-2011, 05:09 AM
owikh84

Quote:

Originally Posted by l0ud_sil3nc3

I will post results when they get here but here are my older sticks

2040 6-9-6

Nice clocks!
vdimm & VCCSA/IO?
10-05-2011, 07:02 AM
Dumo

Quote:

Originally Posted by l0ud_sil3nc3

I will post results when they get here but here are my older sticks

2040 6-9-6

Awesome run there l0ud:up:

Did you try it with CH V?
10-05-2011, 09:41 AM
l0ud_sil3nc3

Quote:

Originally Posted by owikh84

Nice clocks!
vdimm & VCCSA/IO?

thanks but I don't exactly remember vdimm, but I am guessing 1.8vdimm, 1.0875vccio and 0.91250 vccsa

Quote:

Originally Posted by Dumo

Awesome run there l0ud:up:

Did you try it with CH V?

thanks bud however it died on me before I ever got a chance and Fry's was sold out when I went to swap it so I have to grab another one.
10-05-2011, 10:13 AM
Dumo

Quote:

Originally Posted by PolRoger

NewEgg now went back "out-of stock" on this kit.

Memory C...http://www.memoryc.com/computermemor...alchannel.html
10-05-2011, 10:54 AM
Hondacity

some kid bought 3 kits yesterday from newegg... lol
10-05-2011, 11:35 AM
websmile

Must be a kid with too much money :D - I bought 16GB of BBSE performing similar for the price of one kit at memc the last couple of months :rofl:
http://www.abload.de/thumb/10026-8-6-24164vmp90.jpg
10-05-2011, 12:32 PM
Hondacity

lol
10-05-2011, 09:36 PM
l0ud_sil3nc3

Quote:

Originally Posted by websmile

Must be a kid with too much money :D - I bought 16GB of BBSE performing similar for the price of one kit at memc the last couple of months :rofl:

Quote:

Originally Posted by Hondacity

some kid bought 3 kits yesterday from newegg... lol

I bought 2 kits and I am not a kid, and they were about $50 less this time than last time, $230 shipped for both kits. If you think $230 is a lot of money well that sucks for you it sounds like you might need to find another hobby;) No need to hate, just getting ready for sb-e and bd and I jumped on it because this is really nice memory especially for the price.

and websmile that is some nice clocks on the 2000 9-9-9 sticks what volts?
10-05-2011, 09:42 PM
Hondacity

not you bro, some guy i know bought 3kits. so you got 2 kits. you guys are lucky those are awesome kits:D
10-05-2011, 10:26 PM
Dumo

Probly another stock refresh @ Newegg then EOL. Lol
10-05-2011, 11:27 PM
l0ud_sil3nc3

Quote:

Originally Posted by Hondacity

not you bro, some guy i know bought 3kits. so you got 2 kits. you guys are lucky those are awesome kits:D

Agreed, didn't mean to come off sounding like a :banana::banana::banana::banana::buddies:
10-06-2011, 12:40 AM
websmile

Quote:

Originally Posted by l0ud_sil3nc3

I bought 2 kits and I am not a kid, and they were about $50 less this time than last time, $230 shipped for both kits. If you think $230 is a lot of money well that sucks for you it sounds like you might need to find another hobby;) No need to hate, just getting ready for sb-e and bd and I jumped on it because this is really nice memory especially for the price.

and websmile that is some nice clocks on the 2000 9-9-9 sticks what volts?

1,64 volts VDimm, 1,07 VCCSA. 230$ for 8 GB of this ram is an acceptable price, is more or less what I paid for my two kits. But to be honest, at times of price drop I won´t pay 143 euros+ shipping anymore , which memc wants for the kit, this is more than 200 Dollars for 4GB. I paid a lot more for some of my hypers, but as I know where to look and what to buy I prefer getting my BBSE cheaper^^. Which doesn´t mean I´m not tempted every time I see these at Memory C :D
10-06-2011, 01:07 AM
l0ud_sil3nc3

Quote:

Originally Posted by websmile

1,64 volts VDimm, 1,07 VCCSA. 230$ for 8 GB of this ram is an acceptable price, is more or less what I paid for my two kits. But to be honest, at times of price drop I won´t pay 143 euros+ shipping anymore , which memc wants for the kit, this is more than 200 Dollars for 4GB. I paid a lot more for some of my hypers, but as I know where to look and what to buy I prefer getting my BBSE cheaper^^. Which doesn´t mean I´m not tempted every time I see these at Memory C :D

wow, >$200 for a 4GB kit is unacceptable, that is very high I originally paid $160 for them months ago.
I don't even want to talk about what I paid for my hypers and then I what I sold them for:(
regardless you seem to have found some good BBSE sticks:up:
10-06-2011, 03:24 AM
badatgames18

loud you are scoring alot better than me on the last post, was that win7?

i guess 100Mhz on cpu and better tRAS makes a difference?
i bought these for 40 dollars
http://img5.imageshack.us/img5/3531/696sp32m.png
tRFC was @ 95 iirc
10-06-2011, 11:36 AM
l0ud_sil3nc3

Quote:

Originally Posted by badatgames18

loud you are scoring alot better than me on the last post, was that win7?

i guess 100Mhz on cpu and better tRAS makes a difference?
i bought these for 40 dollars
http://img5.imageshack.us/img5/3531/696sp32m.png
tRFC was @ 95 iirc

for me 6-9-6 was slower than 7-9-6 until I figured out the correct subs.

that was W7 x64 with a few tweaks, I need to stop being lazy and install XP
10-06-2011, 02:31 PM
owikh84

Quote:

Originally Posted by Dumo

Memory C...http://www.memoryc.com/computermemor...alchannel.html

Thanks! now I'm ready for quad channel hehe
10-06-2011, 04:23 PM
Dumo

@ Owikh...You're all set for SB-E:up:
10-06-2011, 04:48 PM
sin0822

nice, its always good to be ready for X79!!!!! I am so excited!
10-06-2011, 08:09 PM
owikh84

Quote:

Originally Posted by Dumo

@ Owikh...You're all set for SB-E:up:

Quote:

Originally Posted by sin0822

nice, its always good to be ready for X79!!!!! I am so excited!

Yes i'm preparing for this new platform.
Now just waiting for CPU & x79 mobo :D
10-07-2011, 12:35 AM
websmile

Then I hope you are lucky and get same ICs on the new kit as you have on the old ones, if not you will have to improvize :D / same SPD etc is overrated in my opinion anyways^^- same ics are sufficient :)
http://www.abload.de/thumb/8gb160020001070c832ma3h9.jpg
10-07-2011, 05:46 AM
The Stilt

Hoard up all of the PSC you can find.
The prices are going to bounce once BD is out :rofl:
10-07-2011, 07:49 AM
owikh84

Playing with my old sticks...

2600K @ 5.6GHz
2175.66MHz 6-9-6-20-1T
http://i458.photobucket.com/albums/q...00K/102x55.jpg
10-07-2011, 09:32 AM
l0ud_sil3nc3

Quote:

Originally Posted by owikh84

Playing with my old sticks...

2600K @ 5.6GHz
2175.66MHz 6-9-6-20-1T
http://i458.photobucket.com/albums/q...00K/102x55.jpg

very beast, that is looking really nice:up:

I just got my new sticks in, but no time to play with them today:(
10-07-2011, 09:57 AM
l0ud_sil3nc3

2600k @ 5.7GHz
2222 7-9-6-20-1T
all on water, directly booted from the bios.

http://i.imgur.com/PGCQK.png
10-07-2011, 11:25 AM
Dumo

Awesome clocks there guys:up:

Now save those rams for 2700K or FX8150:D
10-07-2011, 06:25 PM
ZenEffect

this is sort of unrelated... Im doing a little pre-testing right now for the before trying more. ive finally figured out how to run the z68xp-ud4 with higher bclk... turns out i was overcomplicating the issue. so far, bclk has exceeded what was capable on the p8p67-pro using the same chip and memory.

http://i48.photobucket.com/albums/f2.../Capture-8.jpg

see what i did there? ;)

this was on green pcb btw if anybody cares. Jan 2011 sticks.
10-07-2011, 06:28 PM
Hondacity

that is abuse! try it with 4 sticks? :D
10-07-2011, 06:32 PM
ZenEffect

cant get tighter than 8-9-8 with 4 sticks.

dont like the full blown windows 7 x64 ultimate pi? I dont either, but im tuning here because im lazy like that. i will os change and re-run "later"
10-07-2011, 06:58 PM
Hondacity

efficiency/os doesn't matter, I know you got it already :D
10-07-2011, 10:57 PM
Dumo

Quote:

Originally Posted by ZenEffect

see what i did there? ;)

this was on green pcb btw if anybody cares. Jan 2011 sticks.

Nice run there Zen:up:
10-07-2011, 10:57 PM
Dumo

It would be nice to bench 2700K at the same time FX released:D
10-07-2011, 11:51 PM
websmile

Awesome clocks :D - board will not limit you in my opinion btw, none of five boards I had did less than 107bclk, with different really bad cpus as I'm out of hwbot for a long time now and have no need to select cpus I take what I get xD. As for 4 sticks, I think we talked about this before, same with me, 8-9-8 with BBSE, better timings are not possible on various boards
10-08-2011, 04:42 PM
ZenEffect

typically on air my cpu can only do 104.2 bclk on both asus boards i have and the ud7. z68xp-ud4 ive already passed 106.1 which is .2 higher than what i could achieve on asus while cold... though i need to play with skew options more with m4e.
10-08-2011, 06:13 PM
Dumo

Same ram and cpu max @ 108.7 BCLK with P67-UD7 and 106ish BCLK on P67-UD7 B3

Time to start prepping for 2700K, hopefully it will be easier this time around:up:
10-09-2011, 10:55 AM
badatgames18

hey guys.. i realize this might not be the place for it, but is it ok to run 1.72-1.74 vdimm 24/7 on sb?
if not then what is the max you guys recommend?

i need it for my hypers :( and my bbse can hold 7-9-7-20 1T 2200MHz with 1.74v also changed tRFC and subtimings for better efficiency
10-09-2011, 10:57 AM
Hondacity

for 24/7 just use the xmp, then jack up the cpu multi to something stable with 1.3volts. easy :D
10-09-2011, 11:09 AM
ZenEffect

Quote:

Originally Posted by Hondacity

for 24/7 just use the xmp, then jack up the cpu multi to something stable with 1.3volts. easy :D

for 24/7 i do just about the same thing. only diff is, i set cpu multi to 46x, the rest is auto. so... clear cmos, set xmp, cpu multi 46. the board takes care of the rest ;)

then again, honda and I may be assuming too much... you are using a K processor arent you badatgames18?
10-09-2011, 11:12 AM
Hondacity

smart man :D

and mr bad, don't enable pll overvoltage :)
10-10-2011, 12:09 AM
badatgames18

Quote:

Originally Posted by Hondacity

smart man :D

and mr bad, don't enable pll overvoltage :)

thanks for the tip hondacity.. is pll overvoltage bad 24/7 or something.. anyways i don't need that unless i need to boot 52 multi or up

Quote:

Originally Posted by ZenEffect

for 24/7 i do just about the same thing. only diff is, i set cpu multi to 46x, the rest is auto. so... clear cmos, set xmp, cpu multi 46. the board takes care of the rest ;)

then again, honda and I may be assuming too much... you are using a K processor arent you badatgames18?

yep.. using 2600k

i assume you guys also leave speedstep on?
10-10-2011, 06:35 AM
ZenEffect

Quote:

Originally Posted by badatgames18

thanks for the tip hondacity.. is pll overvoltage bad 24/7 or something.. anyways i don't need that unless i need to boot 52 multi or up

yep.. using 2600k

i assume you guys also leave speedstep on?

yes, speedstep and cstates are on to throttle power.
10-18-2011, 07:20 AM
Oliver

KEEP PUSHING IT

http://odoc.dk/files/reviews/mem/gsk..._69620_32m.jpg
10-18-2011, 11:03 AM
l0ud_sil3nc3

Quote:

Originally Posted by Oliver

KEEP PUSHING IT

http://odoc.dk/files/reviews/mem/gsk..._69620_32m.jpg

sick, vdimm?
10-20-2011, 12:42 AM
Oliver

Quote:

Originally Posted by l0ud_sil3nc3

sick, vdimm?

1.83 ~
10-20-2011, 02:55 AM
hiwa

nice vdimm on bbse oli
keep Gskilling it
10-20-2011, 04:36 AM
Oliver

Quote:

Originally Posted by hiwa

nice vdimm on bbse oli
keep Gskilling it

Thanks man :up:
10-21-2011, 04:04 PM
badatgames18

@ oliver... way to push those sticks!

finally got my hands on some today.. from local store!!
just ran it with 1.65v and this is what i got so far
http://img219.imageshack.us/img219/6...ncytesting.gif

on worst chip in my binn :)
i think i have a 57or58x(still have to confirm)... gotta learn waza first though :shrug: :(

here are subtimings... any tips?
http://img854.imageshack.us/img854/9...bbsegskill.png
10-21-2011, 04:50 PM
Dumo

Test with BD

http://img849.imageshack.us/img849/6...enshot053c.jpg
10-21-2011, 04:56 PM
badatgames18

Quote:

Originally Posted by Dumo

Test with BD

http://img849.imageshack.us/img849/6...enshot053c.jpg

all oos from egg :(
i heard it has very good imc... and is fun overclocking.

I want to, but i've never tasted a 57x or above sb chip so still trying to bin to get one :) i think i already do, but gotta test more since sometimes it doesn't like to boot properly :(
10-25-2011, 03:33 AM
owikh84

http://i458.photobucket.com/albums/q...5m56547s-1.jpg
10-25-2011, 04:07 AM
Leeghoofd

Great dimms there love them CL6-9-6
10-25-2011, 04:13 AM
l0ud_sil3nc3

Quote:

Originally Posted by owikh84

http://i458.photobucket.com/albums/q...5m56547s-1.jpg

so beast, i am loving it that is very efficient:up:
10-27-2011, 06:24 PM
easegantini

1 Attachment(s)

Just a quick test with MaxxMEM:

http://img72.imageshack.us/img72/7315/29743.jpg
11-16-2011, 05:05 AM
l0ud_sil3nc3

1.08vccio
1.8vdimm

http://i.imgur.com/bem1S.png

there is still some more room left in the subs
11-16-2011, 03:26 PM
flesheatinvirus

Very nice PI score. What cooling are you on?
11-16-2011, 04:21 PM
l0ud_sil3nc3

Quote:

Originally Posted by flesheatinvirus

Very nice PI score. What cooling are you on?

just water

EK Supreme HF > MCR320 > modded D5 > bitspower res
11-26-2011, 09:04 PM
easegantini

1.675v

easegantini's SuperPi score - Enthusiast League
6sec 688ms with with Core i7 2600K at 5619MHz

http://hwbot.org/image/685382.jpg

easegantini's SuperPi 32m score - Enthusiast League
6min 3sec 593ms with with Core i7 2600K at 5601MHz

http://hwbot.org/image/685384.jpg
12-26-2011, 02:09 AM
Diabolo80

Some 32m action
http://occlub.ru/forum/attachment.ph...5&d=1324582968
http://occlub.ru/forum/attachment.ph...7&d=1324583201
http://occlub.ru/forum/attachment.ph...8&d=1324583202
http://occlub.ru/forum/attachment.ph...0&d=1324583204
12-26-2011, 02:17 AM
l0ud_sil3nc3

Quote:

Originally Posted by Diabolo80

Some 32m action

very nice, and super tight on the subs

green pcb or black?
12-26-2011, 02:34 AM
Diabolo80

pcb is green :)
01-07-2012, 06:07 AM
Hazzan

this kits really awesome run on Quad Chanel X79 on ASUS RIVE... another Great memory from Gskill

2400 7 10 7 24 1T 1.8 Volt

stable all bench...seem like still can run more higher.

http://i1191.photobucket.com/albums/...3/IMG_4920.jpg

http://i1191.photobucket.com/albums/...3/IMG_4921.jpg

http://i1191.photobucket.com/albums/...n3/11121-1.jpg

http://i1191.photobucket.com/albums/...Untitled-3.jpg
03-16-2012, 05:33 PM
easegantini

Good to know... Hazzan.
Now I got 4x 2GB 2133 8-9-8-24 and 4x 4GB 2400 9-11-10-28.
G.Skill is making good memory.

Benchmark: SuperPI 1M (Intel)
6sec 578ms with Core i7 2600K at 5674MHz

Link: easegantini`s SuperPi score: 6sec 578ms with a Core i7 2600K

http://img41.imageshack.us/img41/40/06578.jpg

------------------------------------------------------------------------------

Benchmark: SuperPI 3M (Intel)
5min 57sec 938ms with Core i7 2600K at 5627MHz

Link: easegantini`s SuperPi 32m score: 5min 57sec 938ms with a Core i7 2600K

http://img715.imageshack.us/img715/6614/0557938.jpg
03-17-2012, 11:30 AM
Counter CS

Very nice sticks :D

I just got my self some G-skill F3-18400CL8D-4GBPIS

http://gskill.com/products.php?index=257

ICs xdx017a3g-a

Timings i just tried 2133mhz 1.712v 6-9-6-24, vccsa 0,98125, vccio 1.08125v

Still testing slowly
03-17-2012, 11:54 AM
BeepBeep2

Quote:

Originally Posted by Counter CS

Very nice sticks :D

I just got my self some G-skill F3-18400CL8D-4GBPIS

http://gskill.com/products.php?index=257

ICs xdx017a3g-a

Timings i just tried 2133mhz 1.712v 6-9-6-24, vccsa 0,98125, vccio 1.08125v

Still testing slowly

Wow, that's PSC too.

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 05:42 AM.

XtremeSystems