G.SKILL PIS F3-17600CL7D-4GBPIS 2200 7-10-10-28 1.65V P55 Series

Printable View

Show 100 post(s) from this thread on one page

12-03-2009, 04:39 AM
hiwa

2280 6-8-6-24 -125°c :D:D

Now we can talk about performance?

http://forum.nexthardware.com/galler...9_13-39-29.png

http://valid.canardpc.com/show_oc.php?id=861960
12-03-2009, 05:53 AM
hiwa

Quote:

Originally Posted by dinos22

performance lol no! :D
MHz nice
performance = gay :D

key RAM timing for i7 is tRCD and this RAM just isnt gonna cut it. Their Ripjaws are better modules if you want performance RAM as youngpro showed in F1OC

no have enough LN2 here
but finaly i think 2250 6-8-6-24 32m stable should be crazy with good performance ;)
12-03-2009, 10:36 AM
over@locker886

Quote:

Originally Posted by hiwa

2280 6-8-6-24 -125°c :D:D

Now we can talk about performance?

http://forum.nexthardware.com/galler...9_13-39-29.png

http://valid.canardpc.com/show_oc.php?id=861960

Quote:

Originally Posted by hiwa

no have enough LN2 here
but finaly i think 2250 6-8-6-24 32m stable should be crazy with good performance ;)

Congrats bro, very-very strong result, awesome! :up:

I think 2500+ 6-9-6-x insane too.. :yepp: and 2250 6-8-6-24 is really crazy :D :up:

..what voltage you used?
12-03-2009, 11:40 AM
hiwa

Thanks
1.76 for all
12-03-2009, 01:14 PM
Erklat

Sic :up:

Can't wait till you snag some of those ECOs and show us what are they capable of! ;)

What is considered max safe vdimm for these hypers?
12-03-2009, 01:33 PM
proxis

stop "talking" about performance, please show it (against some 2000 7-7-6)
12-04-2009, 07:45 AM
saaya

Quote:

Originally Posted by hiwa

Good job james
here is nice 6-9-6

2556 6-9-6-28 1.76 Pi and validation

http://valid.canardpc.com/show_oc.php?id=857070
http://forum.nexthardware.com/galler...9_19-59-40.jpg

http://forum.nexthardware.com/galler...m/1_6-9_pi.jpg

i guess UD6 left me, will check later

faints....
12-04-2009, 09:32 AM
hiwa

Quote:

Originally Posted by proxis

stop "talking" about performance, please show it (against some 2000 7-7-6)

as i told before impossible with these memories
should set tRCD + 3 = CL

tRCD same as CL is impossible in high freq ;)
12-04-2009, 05:39 PM
Think

too bad they don't come in a triple pack for the p6t
12-05-2009, 03:44 AM
hiwa

Quote:

Originally Posted by Think

too bad they don't come in a triple pack for the p6t

maybe later we will see some triple channel from gskill
but 2200 7-10 is impossible in triple ;)
12-08-2009, 11:16 AM
borec

I´ve bought 1 kit of these ram. Looks very nice, but for this time I tested only def freq and timing with low voltage :p:
pic 2200MHz 7-10-10-28 1T TRFC100 1,55V stable linx maxmem 5loops :eek:
http://img31.imageshack.us/img31/8601/2200155.th.jpg http://img31.imageshack.us/img31/8835/pb290054.th.jpg

about chips, I removed heatspreder and vualla:
http://img31.imageshack.us/img31/6172/pb290058g.th.jpg http://img46.imageshack.us/img46/5977/pb290056.th.jpg

again renamed :mad::shakes:
12-08-2009, 01:24 PM
zalbard

Quote:

Originally Posted by saaya

faints....

ROFL, so true... Really sick! :up:
12-08-2009, 01:45 PM
proxis

week 0948? ... damn that's fresh
12-08-2009, 05:53 PM
ci2kla

Quote:

Originally Posted by borec

I´ve bought 1 kit of these ram. Looks very nice, but for this time I tested only def freq and timing with low voltage :p:
pic 2200MHz 7-10-10-28 1T TRFC100 1,55V stable linx maxmem 5loops :eek:
http://img31.imageshack.us/img31/8601/2200155.th.jpg http://img31.imageshack.us/img31/8835/pb290054.th.jpg

about chips, I removed heatspreder and vualla:
http://img31.imageshack.us/img31/6172/pb290058g.th.jpg http://img46.imageshack.us/img46/5977/pb290056.th.jpg

again renamed :mad::shakes:

Looks to me like that's PSC ICs? 3A3G-A?
12-08-2009, 11:42 PM
borec

yes...
12-12-2009, 11:14 AM
Cold Storm

6-9-8-21-72 1t

EVGA p55 FTW
i5 750 at 4ghz

http://i205.photobucket.com/albums/b.../ramtiming.png

http://i205.photobucket.com/albums/b...chmentaspx.jpg

It's stable as can be at these specs besides the fact Dragon age doesn't like it.. but, I can play L4d2 for midnight marathons no problems... Dang games.. lol

Got these on the 24th.. One of the best kit I have ever had.. besides my tri-channel tridents

http://i205.photobucket.com/albums/b...lat2200mhz.png

That was on my EVGA p55 ftw
12-20-2009, 11:24 AM
franklin5252

nice kit, thx for sharing looks cool also.
12-22-2009, 08:28 AM
Cold Storm

Thx, I really love these sticks. Wish my Xigmatek Thor's Hammer didn't make it to where I couldn't use the fan that came with it. But, once the case is rebuilt I'll have it.
12-22-2009, 09:39 AM
hiwa

Quote:

Originally Posted by Cold Storm

Thx, I really love these sticks. Wish my Xigmatek Thor's Hammer didn't make it to where I couldn't use the fan that came with it. But, once the case is rebuilt I'll have it.

please give the space btw your fan and you dimm :up: i can tell you if you can use watch fan or not ;)
12-22-2009, 11:41 AM
M3kk

Quote:

Originally Posted by Gautam

Say what you want, gotta admit 2400 C7 looks good. :p:
http://valid.canardpc.com/show_oc.php?id=843100

http://img17.imageshack.us/img17/9529/2400pi32m.jpg

http://img693.imageshack.us/img693/2...0c616pi32m.jpg

:D.
12-22-2009, 12:34 PM
borec

what Vdimm you used?
12-22-2009, 12:40 PM
M3kk

1.73v for the first screen, and 1.60v for the second.
12-22-2009, 01:43 PM
borec

nice!
I have a little problem with this kit and P55-GD80 mobo. When I set more than 1,67V on high freq (2350+++), system no post or freeze during posts, or freeze in windows :shakes:
12-22-2009, 11:27 PM
hiwa

Quote:

Originally Posted by borec

nice!
I have a little problem with this kit and P55-GD80 mobo. When I set more than 1,67V on high freq (2350+++), system no post or freeze during posts, or freeze in windows :shakes:

You sure your Cpu can do it ? are you using 2:10 or 2:12 devider?
12-23-2009, 01:24 AM
borec

I don´t know. I´ve used 2:12
12-23-2009, 01:28 AM
hiwa

Quote:

Originally Posted by borec

I don´t know. I´ve used 2:12

maybe it's your cpu or you set low vtt, if you didn't test it on other memories

good luck :up:
12-23-2009, 01:47 AM
borec

hm today I will test system with 2:10 divider and any other sticks. thank you for response :)

btw: VTT was about 1,35 and 1,45V. I think, this is not small VTT :shrug:
12-23-2009, 01:58 AM
hiwa

please tell us all your settings and options you set in bios
cooling you are using on cpu
i tested a lot of 860 and 870 and can say +95% of them goes over 3600 uncore with 1.35
if u used 2:12 so you had lower Bclk and lower uncore.
12-23-2009, 02:30 AM
borec

ok, for cpu:
200BCLK
VTT 1,33V (200BCLK rock stable) but tested up to 1,45V
PLL 1,81V
PCH 1,08V
qpi 3600MHz (7200)
DRAM only up to 1,66-1,67V

cooling: water or SS -45° without any change...

for memory:
timing is from the XMP profil, after I was manual set TRFC and dividers...
for 2390MHz on ram is this setting OK, but 2400+ is impossible.
12-23-2009, 04:09 AM
M3kk

If you put higher vdim with default settings then its all OK ?
Can you try them in other MB?
12-23-2009, 04:21 AM
borec

yes, if I have memory on a default (2,2GHz CL7) then I can set voltage to 1,85V+ and system post without any problems.

I don´t have other mobo :(
12-23-2009, 04:25 AM
hiwa

Quote:

Originally Posted by borec

ok, for cpu:
200BCLK
VTT 1,33V (200BCLK rock stable) but tested up to 1,45V
PLL 1,81V
PCH 1,08V
qpi 3600MHz (7200)
DRAM only up to 1,66-1,67V

cooling: water or SS -45° without any change...

for memory:
timing is from the XMP profil, after I was manual set TRFC and dividers...
for 2390MHz on ram is this setting OK, but 2400+ is impossible.

MSI set right MEM spd?
i mean you have to try cl +3 = Trcd
example if you want use Cas 7 you have to use 10 like tRCD

best way :
set 2200 7-10-10-27-5-88 1.65 and boot
check Everest timings and write them somewhere, then reboot and set exactly same settings in bios :up:
12-23-2009, 04:34 AM
borec

Mobo, I think, set right SPD
I have 7-10-10-28-?-110 default...
then I set 7-10-10-28-?-80...

Quote:

Originally Posted by hiwa

best way :
set 2200 7-10-10-27-5-88 1.65 and boot
check Everest timings and write them somewhere, then reboot and set exactly same settings in bios :up:

sorry I´m a noob. please what timing is 5 in your settings? thx
---
btw: 2:10 for 2400MHz on ram with my 860 is impossible. max Bclk is about 222 :D
12-23-2009, 04:56 AM
hiwa

it's tRRD
try 2:12
12-23-2009, 05:58 AM
borec

I think, this is mobo or CPU but 2400 is impossible for 32M SPI... :mad:
12-23-2009, 01:33 PM
borec

some results with small frequency
2000MHz 6-9-6-24-5-88 1T 1,63V real linx stable
http://img20.imageshack.us/img20/426...624163linx.jpg

2055MHz 6-9-6-24-5-88 1T 1,655V real SPI 32M
http://img709.imageshack.us/img709/3...962416532m.jpg

Thanks hiwa! :)
12-29-2009, 05:21 AM
Kentaro

:clap: Thanks for sharing this. What VTT do you guys set for 2000 CL6 ??
12-29-2009, 06:09 AM
hiwa

he some nice results there borec :up:

Kentaro
dipend
for
200 Bclk
3600 uncore
2400 mem
i need 1.37 on my 870 and 1.32 on my 860

for 4100 uncore and high bclk with high mem i need 1.50 to 1.60 ;)
12-29-2009, 07:55 AM
borec

My VTT is about 1,35V:)
12-29-2009, 10:02 AM
SF3D

Courier have tried two days in a row to deliver these sticks to me. Why they can't just call..

Can't wait to fire them up! Seems to be perfect kit for low Cas values.
12-29-2009, 10:08 AM
hiwa

look like finland courier is same as italy

try them under cold and u will see :D
12-29-2009, 01:28 PM
hiwa

Quote:

Originally Posted by borec

My VTT is about 1,35V:)

the secret is your background :D change it to black and u have to give +0.5 on VTT :ROTF:

you know IMC changed and go harder with hot desktop background :rofl:
01-03-2010, 06:44 AM
Kentaro

Thanks for sharing

:)It seems these kits can go lower CAS at high frequency than Ripjaws do.

2000 CL6 with 1.65V looks nice. Is anyone going to try it on X58 platform??
01-03-2010, 06:47 AM
Hunt3r_Br

Quote:

Originally Posted by borec

some results with small frequency
2000MHz 6-9-6-24-5-88 1T 1,63V real linx stable
http://img20.imageshack.us/img20/426...624163linx.jpg

2055MHz 6-9-6-24-5-88 1T 1,655V real SPI 32M
http://img709.imageshack.us/img709/3...962416532m.jpg

Thanks hiwa! :)

This bulgar your program?
01-03-2010, 09:13 AM
borec

hm?:confused:

Quote:

Originally Posted by hiwa

the secret is your background :D change it to black and u have to give +0.5 on VTT :ROTF:

you know IMC changed and go harder with hot desktop background :rofl:

:shakes::rofl:
01-03-2010, 11:39 AM
hiwa

2000 6-9-6-24-88-5 1.62 200 X 19
33 minuts LinX passed

http://forum.nexthardware.com/galler..._screen006.jpg

2050 6-9-6-24-88-5 1.65
11 min Linx passed

http://forum.nexthardware.com/galler..._screen007.jpg
01-03-2010, 11:55 AM
proxis

i don't think that linx is a good memory stability tool
01-03-2010, 11:56 AM
zalbard

Try y-cruncher's stability test or WPrime (WPrime doesn't work for me and it's not as effective, though).
01-06-2010, 05:40 AM
devil_mcry

ics of this kit?
01-06-2010, 06:27 AM
borec

I´dont know..
are renamed.
I´ve posted foto of ICS on this thread;)
01-06-2010, 10:02 AM
SimpleTECH

Just got a hold of my kit that came directly from G.Skill. Major props to TweakTown for the gift.

Ordered a P55 board last night, so no testing until next week. :(

I wonder if I could get some decent results out of my X58? :yepp:
01-06-2010, 02:16 PM
DeDaL

Just recieved this sticks week ago.

Very interesting one.

Guys, do you have problems with command rate and dual chanel mode ?
01-06-2010, 03:15 PM
devil_mcry

Quote:

Originally Posted by borec

I´dont know..
are renamed.
I´ve posted foto of ICS on this thread;)

but hs gskill eco same ics of this?
i read this online...
01-07-2010, 12:51 PM
DeDaL

Starting to play..... :D

2600(9-11-9-28-1T-6-90)@1.72v

http://valid.canardpc.com/show_oc.php?id=933433
http://img689.imageshack.us/img689/8094/gskill2600.png
01-07-2010, 03:39 PM
borec

Quote:

Originally Posted by devil_mcry

but hs gskill eco same ics of this?

I think no. Eco has new chips... maybe 40nm elpida :confused:

to DeDaL:
what problem with CR and dual? I haven´t any problems...
and 2600MHz is great :) can pass SPI 1M or 32M? :D
01-07-2010, 10:58 PM
hiwa

Quote:

Originally Posted by devil_mcry

but hs gskill eco same ics of this?
i read this online...

MY personal Idea :

They are same but different category, means for example Elpida sell mem manufactories BBSE but are all BBSEs are same? :D
they have a lot of categories with same name, manufactories binn good ic for their highend product (Class A), and ... :)

all memories from 1600 cl6 to 2250 cl8 are Hyper but they are not same in performnace as we saw before. :up:

PIS is binned IC from last IC's and ECO is mainstream series. :yepp:

BTW nice freq Dedal cpu under cold?:up:
01-08-2010, 12:12 AM
DeDaL

borec The problem is setting high freq at low CL, but prolem is all about CPU's IMC. When you set different Command Rates for cannels, it can helps me to set +70-80MHz with fully working dual channel mode. :)

hiwa thanks, cpu and memory is still on air. I need to do more preporation before do some subzero job;)
Did your sticks scaling after 1.72v ?
01-08-2010, 12:30 AM
hiwa

Quote:

Originally Posted by DeDaL

borec The problem is setting high freq at low CL, but prolem is all about CPU's IMC. When you set different Command Rates for cannels, it can helps me to set +70-80MHz with fully working dual channel mode. :)

hiwa thanks, cpu and memory is still on air. I need to do more preporation before do some subzero job;)
Did your sticks scaling after 1.72v ?

Max on air 1.76 no problem, but when i touch HS was damn Hot !!!
Waiitng for some damage dude :up:
01-08-2010, 01:11 AM
ci2kla

Quote:

Originally Posted by hiwa

Max on air 1.76 no problem, but when i touch HS was damn Hot !!!
Waiitng for some damage dude :up:

I was wondering if this kit will be compatible with EVGA 4X Classified E762... which can do CAS 6 @2Ghz...:confused:
01-08-2010, 10:39 AM
GSKILL TECH

Should be quite impressive on a E762. Will definitely be compatible.

Thank you
GSKILL TECH
01-08-2010, 11:15 AM
hiwa

Quote:

Originally Posted by ci2kla

I was wondering if this kit will be compatible with EVGA 4X Classified E762... which can do CAS 6 @2Ghz...:confused:

sorry my second kit sent for review
when they back i'll try for sure :up:
01-08-2010, 02:16 PM
DeDaL

Less vDDR - 1.70v
Single channel.

2668MHz(9-11-11-31)

All air
http://valid.canardpc.com/show_oc.php?id=936000
http://img97.imageshack.us/img97/3664/gskill2666.png
01-08-2010, 02:27 PM
borec

nice !!!
go for ln2:D
01-08-2010, 02:42 PM
DeDaL

Thanks bro.

It is somthing wrong with official F6 bios for P55-UD6, cant enable 2200CL7(7-10-10-28) at 1.65v
With F6b bios there are no problem.
01-08-2010, 08:57 PM
ci2kla

Quote:

Originally Posted by hiwa

sorry my second kit sent for review
when they back i'll try for sure :up:

Thanks bro :up:
01-09-2010, 05:06 AM
devil_mcry

Quote:

Originally Posted by borec

I think no. Eco has new chips... maybe 40nm elpida :confused:

to DeDaL:
what problem with CR and dual? I haven´t any problems...
and 2600MHz is great :) can pass SPI 1M or 32M? :D

Quote:

Originally Posted by hiwa

MY personal Idea :

They are same but different category, means for example Elpida sell mem manufactories BBSE but are all BBSEs are same? :D
they have a lot of categories with same name, manufactories binn good ic for their highend product (Class A), and ... :)

all memories from 1600 cl6 to 2250 cl8 are Hyper but they are not same in performnace as we saw before. :up:

PIS is binned IC from last IC's and ECO is mainstream series. :yepp:

BTW nice freq Dedal cpu under cold?:up:

ok :\ however this kit is very good :D when I bought the DDR3 me, these were not available :(
01-09-2010, 06:29 AM
borec

I think ECO is very good mems. Some times a little better than PIS, especially with lower timing. But I think his life is very degraded when you pull it on 1,65V+ :)
01-09-2010, 02:51 PM
devil_mcry

Quote:

Originally Posted by borec

I think ECO is very good mems. Some times a little better than PIS, especially with lower timing. But I think his life is very degraded when you pull it on 1,65V+ :)

me too :\ if these have new ics it is sure :|
01-10-2010, 11:46 AM
SF3D

my short oc report..

I will post here few screens from my tests, cause there is no point doing new thread. I got this kit last week after two week delay. Fedex did not do their job as good as usually.

I used cheap ASUS P7P55D Pro motherboard and my i7 870 is the worst of it's kind. On this board, absolutely max bclk is 213MHz :rolleyes:

This issue was limiting my tests quite badly, when I tried to find the maximum stable clockspeeds.

These following results should be easily repeatable in any setup, cause my system parts are so crappy.

Setup:

2x2GB G.Skill F3-17600CL7D-4GBPIS (DDR3 2200 7-10-10-10-28 1.65V)
ASUS P7P55D Pro
Intel Core i7 870
Thermaltake 1200W TP
ATI Radeon 4890
Noctua NH12 cooler
Win vista 32-bit

Few Pictures:
http://www.aijaa.com/img/b/00876/5540923.jpg
http://www.aijaa.com/img/b/00276/5541019.jpg

Results:

6-9-6 @ 1000MHz ( 1.65V / 1.4Vtt)
http://www.aijaa.com/img/b/00942/5541026.png

6-9-6 @ 1045MHz (1.7V /1.4Vtt)
http://www.aijaa.com/img/b/00156/5541038.png

7-10-7 @ 1100MHz (1.65V / 1.4Vtt)
http://www.aijaa.com/img/b/00089/5541058.png

7-10-8 @ 1150MHz (1.7V / 1.4Vtt)
http://www.aijaa.com/img/b/00495/5541079.png

8-11-10 @ 1250MHz (1.74V / 1.4375V)
http://www.aijaa.com/img/b/00796/5541105.png

After this CL 8 run my BCLK was getting too unstable. This CPU just can't do more on this board :p:

Will need to try later on some more suitable mobo + CPU combo.

Very easy memory kit from G.Skill :up:
Special thanks to Frank! ;)
01-10-2010, 08:28 PM
dro

DAMNNNNNNNNNN!

Thank you for showing me that ram can run smoothly on asus p55.
I'm getting one soon then!
01-11-2010, 06:51 AM
dro

Anybody tried this kit with MSI GD65?
From the product website, it states that it works with GD80
01-11-2010, 11:17 AM
GSKILL TECH

Works great on the GD 55 and 65 as well.

Thank you
GSKILL TECH
01-11-2010, 12:26 PM
hiwa

Nice clocks petri, asus is not good for high bclk :(
01-13-2010, 08:44 AM
dro

GSKILL TECH

Thanks there mate!
01-15-2010, 12:00 PM
kagula323

anyone know if these F3-17066CL9T-6GBPS are elpida hyper? or how are they clocking on x58? (I have a Gigabyte X58A-UD7 mobo and I7 920)
01-16-2010, 05:56 AM
Ramguy

The F3-17066CL9, are BBSE not the Hyper.
01-16-2010, 03:07 PM
kagula323

thanks
01-19-2010, 12:09 AM
ezaleina

hi all.,just wanna ask.,is this ram compatible with asus maximus iii formula..?
01-19-2010, 12:59 AM
DeDaL

I test it on P7P55D WS SUPERCOMPUTER, works great.
Seems with all Asus mobos there are no problem.
01-19-2010, 01:10 AM
ezaleina

tq dedal..
01-19-2010, 04:04 AM
hiwa

Tested by me on :

Gigabyte P55 UD5,Ud6,UD7
eVGA E657,E658,E659
Asus p7p55d Deluxe

SF3D used asus P7P55D Pro
Dedal used Super computer
Gskill tech confirmed MSI GD55 and GD65, ASUS Max III Formula

Will update :up:
01-19-2010, 09:46 AM
GSKILL TECH

ASUS Max III Formula is surely compatible. We work very closely with ASUS, so almost all of their motherboards should have no issues as long as it is supported. For basic users, enabling the XMP will be able to set everything just fine.

Thank you
GSKILL TECH
01-19-2010, 05:21 PM
ci2kla

Work on EVGA P55 FTW as well.
However using 2:10 multi with this kit will have no boot issue.
To overcome this, SET the MCH Strap to 1333 or 1600 Mhz. For 2:12, Set to 1867Mhz. If you use 2:10 and 1867Mhz strap combination the MB will go to an infinite boot loop so don't try this. I'm at A51 BIOS.

For Asus P7P55D-Deluxe, with 1202 or 1207 BIOS it should be working fine with any DRAM Multipliers, older versions will only work @2:12 divider when using Core i7-800 Series processor.

Hope this help :up:
01-19-2010, 06:44 PM
dro

Having some problems with the latest GD-65 paired with clarkdale and this ram
Bios seems to lock QPI ratio and XMP mode
Though i doubt the xmp mode will work for clarkdale
01-21-2010, 09:23 AM
SimpleTECH

Quote:

Originally Posted by ci2kla

Work on EVGA P55 FTW as well.
However using 2:10 multi with this kit will have no boot issue.
To overcome this, SET the MCH Strap to 1333 or 1600 Mhz. For 2:12, Set to 1867Mhz. If you use 2:10 and 1867Mhz strap combination the MB will go to an infinite boot loop so don't try this. I'm at A51 BIOS.

Hope this help :up:

Thanks for the suggestion.

Was trying to figure out why I couldn't get it to boot on my EVGA P55 SLI board.

Edit: Crap, cannot get CL 7 to work ... only 8. :(
01-21-2010, 06:36 PM
centy

Nice results! :)
01-28-2010, 07:31 AM
stasio

Anybody using:
F3-19200CL9D-4GBPIS
DDR3-2400 PC3 19200 4GB(2GB x 2)
CL 9-11-9-28-2N
1.65 Volts
http://www.gskill.com/products.php?index=258
or
F3-18400CL8D-4GBPIS
DDR3-2300 PC3 18400 4GB(2GB x 2)
CL 8-11-8-28-2N
1.65 Volts
http://www.gskill.com/products.php?index=257
01-28-2010, 07:36 AM
hiwa

in Gigabyte Hicookie tested both
i'll search for the links ;)
01-29-2010, 06:40 PM
tranngocminh

First test with this KIT :D

http://i489.photobucket.com/albums/r...S/CL7-1092.jpg

IMG: PIS | F3-17600CL7D-4GBPIS | 2 x 2GB DDR3 2200MHz
http://www.xtremesystems.org/forums/...es/biggrin.gif This image has been resized. Click on image to view the fullsize http://www.xtremesystems.org/forums/...es/biggrin.gif

http://i489.photobucket.com/albums/r...IS-1024-01.jpg

http://i489.photobucket.com/albums/r...IS-1024-02.jpg

http://i489.photobucket.com/albums/r...IS-1024-03.jpg

http://i489.photobucket.com/albums/r...IS-1024-04.jpg

http://i489.photobucket.com/albums/r...IS-1024-05.jpg

http://i489.photobucket.com/albums/r...IS-1024-06.jpg

http://i489.photobucket.com/albums/r...IS-1024-07.jpg
02-02-2010, 03:44 AM
DeDaL

MAX freq on LN2

Hello guys!

I have some memory overclocking OC-session.

First of all I reacherd max-freq on G.Skill F3-17600CL7D-4GBPIS

Setup:

- Core i7 860 (crappy one)
- GIGABYTE P55-UD6 (F7c Bios)
- G.Skill F3-17600CL7D-4GBPIS
- GeForce 7900GS
- WD VelosiRaptor 1600HLFS
- Enermax Revolution 1050W
- LN2 Pot "Forsage" New !

I test it with dual channel mode, soon I want to test it single channel.
I mount small LN2 pot on memory, sorry but i forget to make foto.
Tempereture on memory was ~(-80c) and optimal vDDR was 1,7v.

2816Mhz ( 11-13-11-31-2T) :woot:
http://valid.canardpc.com/show_oc.php?id=958121
http://img695.imageshack.us/img695/9941/memory2111.png

http://img693.imageshack.us/img693/2466/27311924.jpg

http://img96.imageshack.us/img96/8359/99066817.jpg
02-02-2010, 04:01 AM
hiwa

very good freq dedal :clap: , find a good cpu with strong IMC is not easy :(
02-02-2010, 04:07 AM
DeDaL

Thanks hiwa

Yes, yes I test about 10 retail CPUs and all are piece of ... )))
02-02-2010, 09:53 AM
eva2000

are i7 860/870 imc that bad ? never tried one yet still on my first i5 750 and imc is very nice so far :)
02-02-2010, 11:11 AM
hiwa

Quote:

Originally Posted by eva2000

are i7 860/870 imc that bad ? never tried one yet still on my first i5 750 and imc is very nice so far :)

yes george some 750 beat 8XX series

as dedal i tested a lot of 860's and 3 870 but damn IMC weren't good
right now i have a good 860 maybe strong as well
02-02-2010, 03:47 PM
dro

Don't make a bad move like what I did........got myself an i3 530
I didn't spend much time playing with the rams yet........
but so far I only managed to go up to 1820cl8 on MSI GD65 :lol:

***need to find myself a better cpu.......any recommendations ;)***
02-06-2010, 10:52 AM
hiwa

another run under cold with PIS memories

2845 9-10-9-28 1.80 b2b disable

http://forum.nexthardware.com/galler...0_19-47-20.jpg

http://valid.canardpc.com/show_oc.php?id=1001711

http://forum.nexthardware.com/galler...emory-2133.jpg

http://forum.nexthardware.com/galler...1_IMG_0694.jpg
http://forum.nexthardware.com/galler...1_IMG_0696.jpg
02-06-2010, 11:23 AM
borec

holly .... :shocked:
hiwa, perfect result :up:
this kit have enought for DDR 3000 :D
02-09-2010, 01:42 AM
Parad0x

Quote:

Originally Posted by hiwa

in Gigabyte Hicookie tested both
i'll search for the links ;)

gimme gimme pls!:D
02-09-2010, 02:08 AM
ICEEXOL

Gigabyte mainboard was used for the test where you can visit:

Translate link:

Google Şu mesajı

Link:

http://www.pckoloji.com/f114/-grup-t...i-14897-gars2/

G.SKILL PI series 2200 MHz @ 2400 MHz - 7-10-10-28 - Air Cooling

http://www.pckoloji.com/f114/-grup-t...#content_start

http://www.pckoloji.com/f114/-grup-t...#content_start
02-09-2010, 03:01 AM
DeDaL

hiwa, very nice result my friend !!!

Did you try it in single channel mode ?

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 03:34 AM.

XtremeSystems