GPU Voltage Tuner - All-new intuitive voltage tweaker!

Printable View

Show 100 post(s) from this thread on one page

07-23-2009, 04:05 AM
Das Kobold

Tried it on a Sapphire 4770 but I get the error message that I do not have a Voltera chip. Oh well guess it is back to plan B - hard mod. Nice looking program though.
07-23-2009, 12:27 PM
wierdo124

Does this work on the GTX260 55nm cards? And the GTX285s?
07-23-2009, 12:48 PM
Riska

For the Hd4770 just use the asus top bios and asus smart doctor then you have 1000/1200mhz in ccc and voltage adjust up to 1.3vgpu
07-23-2009, 02:23 PM
Das Kobold

Done both of those but for some reason Asus Smart Doctor is not adjusting the voltage on the second card, running crossfire btw. I can clock the first card up to 1000/1200 but I crash like crazy if I try to overclock the second card at all. I checked both cards with voltmeter and the first card is getting the volts as set by Smart Doctor but the second card is staying at default voltages.
07-23-2009, 02:31 PM
Riska

Yes thats right it can only adjust the first card then hardmod is the only way 100kohm for gpu and 200kohm for mem
07-28-2009, 03:44 PM
Plan.B

works for my gtx280 - "recertified" from NE. Thanks!
07-31-2009, 11:50 AM
ANTEC900

Will It Work With This GTX 275
http://www.newegg.com/Product/Produc...82E16814127429
08-01-2009, 06:33 PM
Kylzer

Just wondering if anyone can confirm it works with a GTS250?
08-04-2009, 06:30 AM
dinos22

i have the first version for this software
in Vista no matter what voltage i select monitoring shows it right but it only goes to MAX 1.365v measured via DMM :( on my 4870X2
08-04-2009, 11:13 AM
Chr1steR

Nice app, but I have a small problem..
I have a 4870x2, and it only sets the voltage to the 2nd core. No errors or anything. Also, reset doesnt work.
08-04-2009, 07:20 PM
ViViD

Some Problem With 4870X2 And 3D Mark 2006 :)

In AquaMark Test I Set Voltage 1.41v For My 4870X2 And 900/1000 Stable For Test
But In 3D 06 Without Set Voltage 820/1005 Stable And With Set Voltage 1.4v With Voltage Tuner Not Even Go For Higher 820/1005 Clock
08-04-2009, 11:29 PM
nafets

Quote:

Originally Posted by ANTEC900

Will It Work With This GTX 275
http://www.newegg.com/Product/Produc...82E16814127429

Quote:

Originally Posted by Kylzer

Just wondering if anyone can confirm it works with a GTS250?

Nope and nope...
08-05-2009, 06:28 AM
ELItheICEman

Quote:

Originally Posted by mk-ultra

nope not toxic, just regular card with an "upgraded" cooler. Clocks=750/1000stock

i wanted to see if it worked, then i would have watercool that thing :D
but i guess i should just buy a 4890 or a gtx260 and ebay it
decision decisions!!!

non-refenrence design+no volterra=suxor

here it is > http://www.newegg.ca/Product/Product...82E16814102801

I have the same card x2. Up until reading this post I was hoping this would work for me, but it looks like hard-modding will be the only way to do this. Thanks for posting the info man - saves me some trouble :up:
08-06-2009, 12:47 PM
Cecil

Getting an HIS 4870 1gb, this one. The newegg picks shows volterra if you zoom in. Think it would work?
http://www.newegg.com/Product/Produc...82E16814161269
08-06-2009, 07:29 PM
rbuass

Anybody used with a GTX275 card?
If someone worked the software with this card please leave a feedback
Thanks for all
08-09-2009, 10:02 AM
XLAR8

well i gave this ago because the other have me set the voltage for each of my cards. and well i change the voltage to 1.1125v and nothing happens lol, i have to get ready for work ill post more when i get home later
08-09-2009, 04:54 PM
Tom|Nbk

Does anyone know when OVP kicks in on a 4870?
08-09-2009, 10:52 PM
XLAR8

well i tried the program again and it dont work. if i select 1.1125v and press set it says the voltage has change but rivatuner still says 1.0625v. i notice that when i close the program rivatuner crashes.

Edit
i just tried the program agin this time using GPUz to check the voltage and it still says 1.0625v no matter what i set it too
08-09-2009, 11:50 PM
largon

Quote:

Originally Posted by Tom|Nbk

Does anyone know when OVP kicks in on a 4870?

There is no OVP if you use a softmod.
08-10-2009, 12:44 AM
XLAR8

there is on nvidia cards, thats why my cards shut off if i push them to far.
08-10-2009, 01:44 AM
Der_KHAN

Quote:

Originally Posted by XLAR8

well i tried the program again and it dont work. if i select 1.1125v and press set it says the voltage has change but rivatuner still says 1.0625v. i notice that when i close the program rivatuner crashes.

Edit
i just tried the program agin this time using GPUz to check the voltage and it still says 1.0625v no matter what i set it too

same here. i've tried it under windows 7 x64 and vista x64. but the voltage doesn't change. :(

i have a msi 4870 with volterra regulator and im running rivatuner 2.24.
i also have a geforce 6200LE in the second pci-e slot. i have selected the correct card in voltage tuner and even deactivated the 6200 in the device manager, but still the voltage tuner doesn't work correctly.

could it be that the presence of a second card w/o volterra causes that issue?
08-10-2009, 01:46 AM
largon

XLAR8,
What you're seeing is not OVP.
08-10-2009, 05:01 AM
Tom|Nbk

Quote:

Originally Posted by largon

There is no OVP if you use a softmod.

Really?

I have seen peoples voltage limited no matter what volt is set, sometimes around 1.37v?
08-10-2009, 07:46 AM
road-runner

Does not set the 3rd 4890 but says it has set the other 3. I have 4-4890s. :shrug:
08-10-2009, 09:40 AM
XLAR8

Quote:

Originally Posted by largon

XLAR8,
What you're seeing is not OVP.

http://i973.photobucket.com/albums/a...25vpublish.jpg

look in the log ovp or ocp go from 0 to 1 they get activtaed
08-11-2009, 03:56 AM
Deanzo

Hey AgentGOD

Nice work man.

Just did a little testing with two gtx295's

But it will only set to 3 of the cores.

I've taken 3 screenshots that may help.

http://img200.imageshack.us/img200/7...ltagetuner.jpg
08-13-2009, 10:37 AM
largon

Quote:

Originally Posted by Tom|Nbk

Really?

I have seen peoples voltage limited no matter what volt is set, sometimes around 1.37v?

Quote:

Originally Posted by XLAR8

http://i973.photobucket.com/albums/a...25vpublish.jpg

look in the log ovp or ocp go from 0 to 1 they get activtaed

When increasing voltage via softmod OVP trigger is always higher than the set voltage.
09-03-2009, 04:41 PM
MaadDaawg

So, this won't work on my evga 285's - will it work on my evga 295's, or did they cheap out on those too ??? Oops, never mind, just saw Deanzo's post above :P
09-03-2009, 05:13 PM
BeepBeep2

Won't work on my ASUS Top 4850 either. Not Volterra VRM's...
09-04-2009, 10:16 PM
spajdr

so what voltage is recommended for GTX295 (gpus) card? :) can anyone recommend?
09-05-2009, 03:33 AM
Nikra

@ NaMcO

Quote:

Originally Posted by NaMcO

Works just fine with my other PC's HD4890. Set to 1.3750v and able to attain 1GHz core speed easily. Used in Windows 7.

Do you use the standard air cooling system or did you switch to liquid ??:confused:

/Nikra
09-05-2009, 05:28 AM
Riska

The Asus 4850top just use the asus smartdoctor to raise voltage on the gpu
09-05-2009, 05:38 AM
dinos22

is anyone else having problems getting more than 1.36v to work

i am talking DMM measured here
not what you can apply

i can apply 1.6v but the cores will not take more than 1.36v once actually measured

4870X2 card
09-05-2009, 06:04 AM
EvoCarlos

Quote:

Originally Posted by dinos22

is anyone else having problems getting more than 1.36v to work

i am talking DMM measured here
not what you can apply

i can apply 1.6v but the cores will not take more than 1.36v once actually measured

4870X2 card

just remember x2 has 2d-low/med/hi and 3d-low/med/high if you set 1.3v in os (2d) when you go to 3d mode it reverts back to the stock 3d volts 1.26v

ive hard modded my x2 (voltera hax) for 1.33v 3d-hi it gives 1.26 2d-low

cant get the voltagetunner to work but im blaming the os for not having c++

@AgentGOD
good job :)
09-05-2009, 06:34 AM
NaMcO

Quote:

Originally Posted by Nikra

@ NaMcO

Do you use the standard air cooling system or did you switch to liquid ??:confused:

/Nikra

I did that on air, it's now watercooled, but worked fine before.
09-05-2009, 06:39 AM
dinos22

Quote:

Originally Posted by EvoCarlos

just remember x2 has 2d-low/med/hi and 3d-low/med/high if you set 1.3v in os (2d) when you go to 3d mode it reverts back to the stock 3d volts 1.26v

ive hard modded my x2 (voltera hax) for 1.33v 3d-hi it gives 1.26 2d-low

cant get the voltagetunner to work but im blaming the os for not having c++

@AgentGOD
good job :)

i get 1.36 in windows idle and load
my card is forced to 3d clocks all the time
09-20-2009, 10:06 PM
raine09

Thanks! I've been waiting for this.

Regards,
Raine
Pret travaux
09-21-2009, 08:16 AM
EvoCarlos

Quote:

Originally Posted by dinos22

i get 1.36 in windows idle and load
my card is forced to 3d clocks all the time

full bois moddage ? :shocked:
1.36 in all locations :)

i give mine 1.4v to the cores in 3dmode on air cooling 900 core worked for 05 need more speed :) the card is bearlly used no i have the 295gtx :)
10-04-2009, 04:30 AM
devil_mcry

this tool work only with voltera chip, right?

how can i find what i have?
10-27-2009, 09:06 PM
MetalX

No luck with an Asus EAH 4870 1GB, says it does not have correct regulator. Wonder what my options are with this card.
10-28-2009, 10:07 AM
Riska

Use asus smartdoctor
10-29-2009, 02:17 AM
MetalX

I have Smartdoctor installed. The voltage tab is blank with nothing to change. Is there a patch or something I need to install like with the EVGA software? I always assumed that this tab was only for 5xxx series cards.
12-10-2009, 01:12 AM
nsegative

Anyone with an hd4870x2 can tell me how far they clocked it on what voltage? I can't seem to find any references anywhere, even on google!
12-10-2009, 12:53 PM
hotwheelx

MSI 3870X2 OC edition and this works!!!!! YAY! Here comes 1GHz! I upload pic when start ocing this.
12-10-2009, 02:28 PM
almighty15

This works awesome, respect!! :D
12-12-2009, 06:10 AM
Bootup05

I also get the Voltage regulator error.

My card is a Asus HD4890 Dual fan, I know it has a controllable VRM as It comes with SmartDoctor and I can modify voltage using that?

I'd like to achieve 1GHz using just over 1.4v, which is SmartDoctor's limit.
12-13-2009, 03:06 AM
Halos

Hi guys.

Anyone tryed this on 3870x2 ?Well i did, but i dont know how much voltage can gpu take :D

http://www.imagesforme.com/thumb/thumb_969c616c.jpg

GPU @ 945-1.3375v

p.s. i always had one question about 3870x2, if i set clocks in dn. riva tuner or so, are they applied at both GPU-s or, just one, from GPU-z i can tel is only one...i mean. All this time i didnt even bother with this question :D
12-13-2009, 03:10 AM
almighty15

Quote:

Originally Posted by Bootup05

I also get the Voltage regulator error.

My card is a Asus HD4890 Dual fan, I know it has a controllable VRM as It comes with SmartDoctor and I can modify voltage using that?

I'd like to achieve 1GHz using just over 1.4v, which is SmartDoctor's limit.

Go to this link : http://www.guru3d.com/article/overcl...deon-hd-4890/2

Download the Rivatuner Radeon 4890 configuration file and install it.

I got the same rror as you and installing this fixed it :)
12-13-2009, 06:05 AM
hotwheelx

Quote:

Originally Posted by Halos

Hi guys.

Anyone tryed this on 3870x2 ?Well i did, but i dont know how much voltage can gpu take :D

http://www.imagesforme.com/thumb/thumb_969c616c.jpg

GPU @ 945-1.3375v

p.s. i always had one question about 3870x2, if i set clocks in dn. riva tuner or so, are they applied at both GPU-s or, just one, from GPU-z i can tel is only one...i mean. All this time i didnt even bother with this question :D

I´ll keep it at 1,45V for Top if its enough for 1GHz.. just trying see what is enough. I start ocíng my card when get better motherboard and can put my older 3850 (bios and volt mod) with my newer 3870X2 at CrossfireX.. im bored for this mb crap and no one post anything to my problem thread so what ever...
12-14-2009, 07:33 AM
OLDcomer

Did anyone find out why raising gpu voltage on 4870x2 gives no benefit to 3dmark2006 benching frequencies?
01-02-2010, 10:11 AM
playground

Quote:

Originally Posted by devil_mcry

this tool work only with voltera chip, right?

how can i find what i have?

???
04-09-2010, 04:13 PM
Maximous

Hey. Im having trouble making this work. My card is a MSI 295 GTX single pcb. Doesnt have the right regulators it says:(.

Can it be fixed?
04-09-2010, 05:31 PM
overclocking101

I cant get rivatuner to work. it sees one card but wont oc it, it sees the second card as "unnatached device. to bad to I always liked rivatuner but it apparently dont work if ou use any catalyst after 9.12
04-09-2010, 06:31 PM
EvoCarlos

Quote:

Originally Posted by Maximous

Hey. Im having trouble making this work. My card is a MSI 295 GTX single pcb. Doesnt have the right regulators it says:(.

Can it be fixed?

nope the single pcb 295 card has no voltage mod thru softwere only hard mod

carl..

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 06:12 PM.

XtremeSystems