I am just trying throw out ideas.Quote:
Originally Posted by =[PULSAR]=
1. Have you tried it with a regular Monitor
2. Is your Video Card capable of perform HDMI function ie HD 720p/1080, is your 32" screen HD? (Grasping at straws here)
3. Do you have another Video Card to try with the regular Monitor.
4. Is your Memory working?
5. PSU up to snuff.
6. All the plugs plugged tightly.
My computer just does not get tired. It will not enter the S3 sleep mode. I have enabled 'S3' in 'Power Management' of the bios under 'ACPI Suspend.' and in Vista. The monitor screen goes black as it should but I can hear the computer fans still operating. Then I cannot get the screen back, no matter what I do. I have to hit the power button for a couple of seconds and turn it off and then restart.
Any Ideas? Thanks
Need some advice on getting 600FSB with my E8400, what are the recommended settings to do it. Im on watercooling....temps are good.
And also Can someone please explain how i use the GTL settings and the DRAM settings (more aggressive settings underneath the 3 that can be set)
Along with how do the CLK settings work.
Much help would be appreciated. Was having a hard time trying to boot into window at 533 x 7.5 for 4ghz. I was getting a system32 error where it wants you to repair windows by inserting WinXP disk.
Thanks guys
System specs on in my sig.
CPU:
http://img372.imageshack.us/img372/7...3942nz6.th.jpg
What kind of voltage are you throwing at the NB, and can your ram run at 1200?
For the GTL stuff, there is lots to read here: www.edgeofstability.com (it's not a simple explain sort of thing)
Anandtech did a great article on the DFI P35: http://www.anandtech.com/mb/showdoc.aspx?i=3129 (a lot of the information is for a quad, but it's still useful for just general board settings)
does this board support 45nm out of the box or would you need to use an older 775 chip to flash the bios first and then put the E8400 in? Was looking for this board for a friend but dont exactly have older 775 chips laying around.
i decided to go back to p35 wanted to try this board out since x38 suks @ high fsb
whats the best bios for high fsb 550+
and the best all around bios
tks
Yes, you need to flash a 45nm support bios with a 65nm cpu inside and then it will work.:up:Quote:
Originally Posted by Budwise
What do you value as a high fsb? 400+, 450+, 500+, 550+?Quote:
Originally Posted by zsamz_
Try the beta perhaps for that.
Some of the recent ones are shipping from the Egg with a bios that supports 45nm. I set one up last week out of the box with an 8400.
What few "UT" P35's that were left at NewEgg likely needed no bios flash to run wolfdale out of the box.Quote:
Originally Posted by mrcape
That however is unknown for the LP "LT" P35 T2R boards.
This was an LT.
no bad so far just need to learn the board
got to 576fsb any tips for higher would help
1.55vcpuvtt 1,65v nb
set on auto tuned the gtls a bit board fussy on gtl settings
verry nice board indead i wish i bought it on day 1
still workin @ max fsb got it to 585 locking up @ 588
performance is better than on x38
still tweakin gettin there
i shoulda bought 1 when you did turtletax
2.08v dimm
1.52v cpu
1.46v nb
Tru dat. I love this board more than my Ultra-D, and that is saying allot. I watch so many people spending huge cash on X38/X48 and not using DDR3 or Crossfire and I wish I could help them see how good this board really is. IMHO the best DDR2 board out there period.Quote:
Originally Posted by zsamz_
Nice clocks to zsamz :) Keep it up :up:
yup x38 a pure waste i was thinkin p45 but i didnt wanna take no chancesQuote:
Originally Posted by turtletrax
i just lovin the board mind you the x38 is a great board but this one just awsome more bandwith + faster than x38 after 500fsb i dont test sub 500 lol
i need more tweeking turtle its getting there
i wanna break 600fsb but i think my cpu is capped @ 588:mad:
to be honest this board is close to perfection:up:
If only it were painted in the style the LanParty Dark is i think it would be flawless.:up: Still, i love it a lot nevertheless.Quote:
Originally Posted by zsamz_
yup lol those colors are nicerQuote:
Originally Posted by mad_skills
did more playin around this time with 4 sticks x38 is king with 4 sticks lol
this 1 for you turtle i pushed a bit more
wow... wondering now if i should step back to the p35 now myself.. nice job there
that was only day 1Quote:
Originally Posted by zfactor
i tweaked it more
2.03v on my beautifull ballistix
Any word if there's going to be a DFI LP UT P45-T2R ? If so, sold. If not I'm going to try a Foxconn.
According to this -
http://www.benchtec.co.uk/forums/showthread.php?t=671
There will be DFI LP UT P45-T3R. Well, that's pretty cool too actually as I want to grab one of those new Mushkin DDR3 kits amd get familiar with DDR3. Either DFI LP UT P45-T3R or the Avenger sounds good to me.
LP UT P45-T3R
Intel FSB1333 Core 2 Duo and Quad Core
Intel P45 + ICH9R
DDR3 support
Solid Capacitors
1 x16 or 2 x8 Gen2 +1 x4 Graphic Slots with Crossfire
1 x1 PCIE Slot and 3 PCI Slots
8 phase Digital PWM – Volterra
Heat Pipe set for CPU,PWM,NB and SB
JMB363 for 2 SATAII ports and 1 IDE port RAID
2 GbE LAN ports by Marvell 88E8052 + 8053 with teaming
ALC885 for 8 channels HD audio in Bernstein card
305*245mm 6 layers PCB in Black
Mmmm tasty.
actually i read dfi gonna have many flavors in p45Quote:
Originally Posted by mrcape
i will be buyin 1 for sure but i dont need to rush lol p45 gonna need to mature before it gets as good as this board
pretty big shoes to fill
True. I think this board and it's bios have set some new standards. I'm itching to see what the P45s can really do.
QFT! :up: I see more and more high-end board starting to have DFI level bioses.Quote:
Originally Posted by mrcape
hmmm interesting...most boards with a P45 chipset will have the ICH10RQuote:
Originally Posted by mrcape
& just DDR3? no DDR2 coming?
Don't believe everything in print. There are no official specs for the DFI board published.Quote:
Originally Posted by emoners
thanks Praz...coz honestly, i'm sticking with DFI.:up:Quote:
Originally Posted by Praz