Printable View
Why not sell the RAM on-Bay. Sounds like the mainboard is fine. Selling memory on e-bay is allot easer than selling a motherboard. Also, Asus w/ the bios of the P5b has good future CPU compatibility. Most manufactures are making yo buy a new board for the new CPU support.Quote:
Originally Posted by mrt2
Nut some DDR2 off the QVC list.
The bios utility in the P5B bios is a very easy and simple way to flash a bios.Quote:
Originally Posted by eyes.only
Hmmm.... what's a good 2 gig RAM kit from gskill or crucial that's comprable to the OCZ platinum 8000 2G kit (OCZ DDR2 PC2-8000 Platinum)?
Quote:
Originally Posted by mrt2
Actually this 2gb kit of Gskill 1000mhz ddr2 ram is a lot better than the OCZ. Timings are 4 4 4 5 vs 5 5 5 15 for your OCZ.
Gskill-
http://www.newegg.com/Product/Produc...82E16820231077
Could only find (PC2 8500) for the crucial. I would personally take the Gskill over these as the Gskill will be faster with the tighter timings.
Crucial-
http://www.newegg.com/Product/Produc...82E16820148069
I heard that these chips bake themselves after being used at 2.2v (which is what they are rated for) for continuous use. And that if you were going to use this RAM use it for your gaming machine not your on 24/7 machine... any truth to this?
Quote:
Originally Posted by mrt2
LOL I seriously doubt that seeing as they are rated for 2.2v to begin with so they should have no problem holding up to it. If anything get yourself a decent ram cooler, I have the corsair 3 fan ram cooler and it does an awesome job.
I have ran ram at 2.3vc in the past for long periods of time (to get ddr2 1000mhz speeds) when it was only rated at 800mhz with 2.1vc and mine has yet to ever fail me. Then again I have a ram cooler and it makes a big difference in the temps as my ram went from being mildly hot to the touch to feeling rather cool to the touch.
If anything you could always back the timings down to 5 5 5 15 like your OCZ ram and then you should be able to lower the VC a bit.
Has anyone ever seen the ASUS LED *blink* blue? Now, whenever I flick the switch on my PSU (but before pressing the power-on button), the LED blinks blue. The power-on button has no effect when this happens, so the system doesn't even boot. Anyone experience this?
code blue
call a code
crash cart!!
WTF?Quote:
Originally Posted by ziddey
I fixed my problem with the blinking ASUS LED! One of the front panel USB connectors was improperly connected... that was a scare.
Man these new egg reviews of this RAM are scaring me LOL.
I enabled write-back cash, but still say its not enabled in windows and cannot be enabled...Quote:
Originally Posted by redrol
This board is starting to freak me out :down:
Not to mention weird output sound disapperaing issue under Vista.
Still low HD trough-put for 2xSATA2 discs in RAID0
---------
Regarding OCZ memory... i am just about to buy one, and now i see you are all saying its bad combo with this mobo... WTF??
Also i read trough manual of this mobo and its says *--- up to 800MHz support for dual channel kit..---- and i was WTF!!!?
Cause i am about to buy OCZ 1150MHz DDR2 2x1GB kit, and dunno if it will even work now. Will it?
---------
I got a reply from ASUS regarding the RAID0 not being able to install Windows XP issue :
Quote:
Dear sir/madam,
Thank you for contacting ASUS Customer Service.
My name is Penny. It's my pleasure to help you with your problem.
Please contact your dealer and let him test P5B Deluxe/WiFi-AP for you. If the problem still exists, please let him send the motherboard to ASUS RMA, we will test it and help you to resolve the problem. Sorry for any inconvenience.
If you have any problem, please refer FAQ(Frequently Asked Questions) or contact us again. We will try our best to help you.
http://support.asus.com/faq/faq.aspx?SLanguage=en-us
Sincerely,
Penny
ASUS Customer Service Center(China)
And since i am chief of servicing and RMA where mobo was bought.... :) i guess i have to send it away :(
And i told all this to the importer and they said since they have no boards to replace i can get money back... probably after decent period of waiting...
I am just plain tired of this mobo... who knows if it will ever work fine...
I just have 2 more things to try (disabling all usb, moving memory stick to 3rd slot and installing using original XP cd; and slipstreaming drivers), and if that doesnt work, its bye bye this mobo, and maybe ASUS as well.
This is starting to look more like gypsy voodoo then modern computer work -- disale all usb, move to 3rd slot,...:rofl: :rofl: well to hell with it, if it works i am buying my computer a robo pet as reward :ROTF: :ROTF:
Quote:
Originally Posted by mrt2
I would not pay to much attention to newegg.com reviews. Unfortunately you have a lot of noobs out there who are usually the ones responsible for frying their own ram and then blaming it on the ram itself:rolleyes:
I tell you what, if you are really concerned about it then why dont you just buy the exact same ram that I am running and since we are both running the same MOBO you know you will be in good shape;)
I have 4gbs of this ram and for the $$$ you cant beat it!-
http://www.newegg.com/Product/Produc...82E16820231114
I can run it all the way to 950mhz 4 4 4 5 timings rock stable at 2.150vc. I am using this nifty little ram cooler to keep it cool and it does a heck of a job!
http://www.newegg.com/Product/Produc...82E16835704001
I know this is showing off but I cant help it-My baby! YES BEFORE ANYONE ASK I REALIZE THE BOARD SAYS ITS A P5B PLUS BUT ITS NOT, ITS A P5B DELUXE. I PEELED AWAY THE P5B DELUXE STICKER AND THAT IS WHAT WAS WRITTEN UNDER NEATH IT. LOL.
http://i197.photobucket.com/albums/a...OB/Picture.jpg
Quote:
Originally Posted by Angelico_Payne
Yes, dont waste your money. OCZ and this board are not very compatible. The P5b deluxe board likes Gskill and crucial ram the most.
Oops I already ordered the crucial ballistix sticks that you recommended... I read through those reviews and every single review RAVED about them... and more than half of those reviews said that they were able to get 4-4-4-12 out of them... with 2.1 voltage which sounds awesome to me... what do you think?Quote:
Originally Posted by SLINROB
Even though the 6400 gskill is cheaper a bit...
I have a question too... since the mboard manual said that the board is can do up to 800 mhz does that mean 1000mhz RAM won't work or will have problems?
Quote:
Originally Posted by mrt2
Dude you cannot go wrong with the ballistix, all in all its better quality ram than Gskill and should over clock really well. My last set of ram was the Crucial 10yr Anniversury ram and I think it was basically the same ram as the Ballistix with the micron d9's.
That crucial ram I had was rated for 667mhz 4 4 4 12 and I ran those bad boys at 1000mhz 4 4 4 5 with just 2.250vc.
As for your question about the board having problems with 1000mhz ram I really dont see why it should seeing as I have overclocked my ram plenty of times in the past up to 1000mhz.
EDIT-I just saw that the ballistix is only $79.99 after the mail in rebate!? dang man you would have to be crazy to go with anything else other than this ram! GOOD DECISION!
WHAT?!?! A rebate? I didn't even see that LOL... I'm looking on the page but I don't see anything about a rebate... will a rebate form just come in the box or something? Where do you see info about a rebate? Also when I get the RAM could you help me with some of the settings so I can get the most outa my card/board?
Quote:
Originally Posted by mrt2
This is what you got right? it says $45.00 mail in rebate.
http://www.newegg.com/Product/Produc...82E16820146565
Or did you go with these?
http://www.newegg.com/Product/Produc...82E16820148069
If I were you I would go for the 800mhz ram because it will only cost you half as much $$$ after the mail in rebate. Plus you should have no problem overclocking this ram. I am a little worried about the PC2 8500 ram mixed with the P5b deluxe, You would be better off with the PC2 6400mem instead. Just cancel and reorder if you need to.
I will be glad to help you with the settings when you get the ram:)
i have recently installed this board after tried many before lol, i hadthe p5w dh deluxe which did not o/c very well for me,lets say at default settings it would tell me overclocking had failed,time for that board to go,
i also had the p5n -e sli which was pretty much the same,only let you o/c the ram or the cpu,never let you do both,and there was limits on how far you go with the ram and also had the same problem with this ,when it came to boot it would keep telling me o/c failed even after i had system running fine for 3 days without switching it off,
so now i have took the plunge and gone for the p5b deluxe which seems more versatile than the other 2 and works well with corsair and cellshock ram and also lets me o/c some,i also bought 1 of those xeon 3070 which i thought would run cooler than the conroes and o/c better - well it runs idle at 46 which surprised me as i had an e4300 which run at 29 idle 37 under load so not sure if i have a good batch,lol,
i have noticed 1 thing with this board which lets it down,any guesses its the sound,shockily bad and software that comes with it is just as bad,it there a good driver for this,any help would be much appreciated and where's the best place to download the intel chipset drivers - asus site is very slow
also hit another small problem when i boot up it always says cpu error - i have to press f1 everytime.i almost forgot video benchies are down significantly,on nfs most wanted it looks drab on full settings - in cpuz it says pci - e is x16 on both.thats a mystery-
other than that i like the board as it does let you o/c and i have had some good results but the xeon is a bit toasty,lol,
any hints or tips in the right direction is much appreciated
kind regards
paul
You see that huge CPU cooler in my rig shot I posted? Get that, its the Tuniq Tower 120 and its pretty much the best air cooler $$$ can buy.Quote:
Originally Posted by cholo777
It keeps my E6600@3.6ghz with 1.5vc at a idle temp of just 28c and loads under orthos with small fft's at just 54c. :up:
CRAP I got the DDR2 8500 not the 6400... I thought you would be able to use the 8500 on the p5bdeluxe? Why wouldn't it be able to work? I'm calling new egg right now... My order is passed the point where you can cancel online. :(
Im not saying for sure that it will not work but unfortunately I do not know of anyone that has ever successfully ran that ram with the P5b deluxe therefore I cannot recommend it.Quote:
Originally Posted by mrt2
Dude just do the online chat option to cancel the order, its much much faster.
Quote:
Originally Posted by chuckbam
Chuck,
So you mean that flashing the bios through the bios itself with ez-flash solves the cold boot problem (or whatever it's called)?
Ok I called and canceled and then ordered the 6400 version. And I ordered the RAM cooler too, so I can OC... hopefully it fits with all the other huge components I have LOL.
Good deal! Let me know when everything arrives and I will help you out with timings etc....:up:Quote:
Originally Posted by mrt2