using the last official one.. performing not so bad, but i have problems running these f*****corsair vengeance with reasonable speed.Quote:
Originally Posted by sin0822
Printable View
using the last official one.. performing not so bad, but i have problems running these f*****corsair vengeance with reasonable speed.Quote:
Originally Posted by sin0822
I just started OC'ing with thus board and am loving it but how do I get past the CPU voltage error during post? Anyway to bypass this?
just put the setting to ignore in the monitor tab
Thanks!!!!
Well, I'm loving this board. With my UD7 I was only able to get up to 54x with my chip. The same chip I can get to the Windows logo screen @ 59x.:eek: Don't know if my chip woke up or what but I'm not complaining.:D
You can get to the windows loading Logo? Or you can get to the windows logon screen? I can get to the windows loading logo with 59X on all of my last 4 chips but only 2 would boot into windows and get to windows logon screen at 55X and 56X. The rest of the chips would freeze at windows loading logo no matter what voltage or settings but would post all the way up to 59x.Quote:
Originally Posted by Devil_Dog
Hi, i just receive this Lady yeasterday, and i'm lovin how this baby can make the diference vs P8P67 maxing BCLK.
P8P67 vanilla max BCLK 105,4Mhz
M4E B3 max BCLK 106Mhz, im not finish yet, still more room to go.
I was trying to get those Corsair Dominator GT with chips MNH-E to run Spi32M @ 1833 and 2133Mhz, but no go.
Start spi32M then sistem completly freeze like on P8P67.
I'm starting to think that the problem is my CPU memory controler.
i am using BIOS 3D01_2 (1905)
Need some advise to get this thing running 2133Mhz ... anyone ?
VRM frequency upped ? which timings and volts did you try for the dimms ?
Hi, thx for trying to help.
Well, i was trying 8-8-8-24-1T 1.65v, vccsa: 1.05v Vccio: 1.15v
CPU @ 4ghz 1.3v just for test Dram clocks.
But didnt touch VRm Frquency.
NF200 voltset help mem an cpu
cpu ? low vcore :)
not all hypers play well with sb.Quote:
Originally Posted by Counter CS
try giving them some more volts (1.7ish)
not all hypers play well with sb.Quote:
Originally Posted by Counter CS
try giving them some more volts (1.7ish)
damn man congrats !!!Quote:
Originally Posted by Devil_Dog
counter 1905 bios ? where is that ?Quote:
Originally Posted by Counter CS
think he meant 1902Quote:
Originally Posted by andressergio
This settings is ok?
http://www.shrani.si/t/1/Vg/2zv5INMy/img0591.jpg
But even if i monitor.. if the PC locks up, i can't do anything ... :( Hard reboot will reset everything.Quote:
Originally Posted by sin0822
Is 1.5V for 5.0ghz ok for 24/7?
´MTM
set all speed step to DIS..
just noticed that the max VRM frequency on MIVE-Z is 550MHz only in bios 0403
I need higher VRM speed to get lower vcore & avoid BSOD 124
What voltage should change to 5.0ghz? Here are pictures from the BIOS. I have Maximus IV Extreme-Z.
http://www.shrani.si/t/3V/UO/4JGsYot5/img0592.jpg
http://www.shrani.si/t/37/GS/3sciMeA5/img0593.jpg
http://www.shrani.si/t/20/ZU/U3kKTGL/img0594.jpg
http://www.shrani.si/t/1W/bX/4op8gq87/img0595.jpg
http://www.shrani.si/t/1J/z5/1Qg5xYpA/img0596.jpg
mate i would load EXTREME PROFILE wich gives you a basic OC template we all use mostly and then just put vcore u wantQuote:
Originally Posted by M_T_M
use 75% of LLC
VRM on 350
internal PLL enabled
cheers
Sergio
Did anyone get any further with this Vcore offset feature, and running a stable setting?
Set this EXTREME PROFILE on YES?
nope i didnt even try chip is fine with C states on or offQuote:
Originally Posted by MonsterDK
yes will set a nice nice template for OCQuote:
Originally Posted by M_T_M
of course, i do.. :p:Quote:
Originally Posted by MonsterDK
Guys anyone noticed that AI SUITE gets buggy sometimes, i got 2 times reported some values on 0 and then process starts using 30% CPU i have to close it and restart
cheers !
Sergio
Have you tried the newest version or are you running the one off of the mb disc?Quote:
Originally Posted by andressergio
I have noticed that whenever I have realtemp open, AI Suite will report voltages that are incorrect, i.e. mb, psu etc. . .
I have not tested the newest version yet
noticed that AI Suite had some problems reporting values 0 if i open HWInfo and AI Suite @ the same timeQuote:
Originally Posted by andressergio
Got a problem When I load the Extreme Profile. When I load it my HDD does not show up anymore. My DVD drive shows but nothing for the HDD. Don't know what to make of it. Even if I just try to boot it ask me to load bootable media? Bios is 1850.
Anyone else experience this?
DDog when loading xtreme profile it will disable lots of things did you check ? boot, order etc inside BIOS ?Quote:
Originally Posted by Devil_Dog
cheers !
Sergio
Or check to make sure RAID is selected under SATA Configuration or AHCI, depending on what your using. When I load different profiles I have to go back and set SATA Configuration to RAID then put the RAID array as first boot device.
Annoying but it happens.
yes happened to me alsoQuote:
Originally Posted by deachus
guys just to share this info with you as we all know we want good chips
i tested 2 #L045B385 MALAY and 1 is x54 and the other is x56
i tested 2 #3103B375 COSTA RICA 1 is x55 and the other x56
so far very good batches just to let u know ;)
cheers
Sergio
Had to switch sata ports for it to show. What a pain in the ass.
Its time to put 'em under subzero Andre:up:
You only need one that can go 57X/58X or 59X
I am selling my 2500K 55X chip and one of my two 2600K (52X) chip. Its a great little chip but I need HT for my main use, encoding. I will try another one from MicroCenter this week or next, depening on when they get their shipment in. Last week they only had 3 left (all new batches) and now they are out of stock so as soon as they get their shipment in I will pick another one and test it out.Quote:
Originally Posted by Dumo
Dumo, now I just need a solid SS that doesn't cost me an arm and a leg and I would love to get into subzero. I have a subzero air chiller which gets to about -30C but have to build the PC inside of the insulated air chamber and load temps on an old P4 would get to 10C with alot of voltage. Have not used it for so long because it is a PIA to setup. Would love a nice SS for a good price.
You can check in vapor phase change section here Deachus, theres a few good built there.
Some of my 2600K that can go 5750Mhz. 4C/4T won't even do 5600Mhz 4C/8T HT on vantage/'06/wprime stable at any Vcore/temp.
Whereas another 5650Mhz max cpu has no problem running HT on near its Mhz. wall
yeah i remember u promised me one :rolleyes: still waiting the day for now i just found 2 nice x56 one better than other but still nice chipsQuote:
Originally Posted by Dumo
thanks Dumo !
Cheers
Sergio
Yep, I'm still binning Andre eventhough kinda late in the game for 2600K...Quote:
Originally Posted by andressergio
SB-E and Bulldozer probly will take over soon:)
Cool wanna share what you know? :)Quote:
Originally Posted by Sauron_Vie
I will check out the vapor phase change section.
I am only looking for a solid 2600K that can run 24/7 5Ghz or higher low volts. Would like to get one that does 5Ghz at 1.42v or less. I would also like that same chip to be bench stable at 56x100 4C/8T Vantage, wPrime.
I know they are out there but just haven't found one yet. Hopefully the new MicroCenter shipment coming in this week has some good ones in it. Have you tested alot of the new batches? 3115BXXX, 3117BXXX ?? If so, have you found any 56X chips in those new batches? I only see newer batches at MicroCenter since I snagged that 3103B chip that died on me.
1.4ishVcore 5Ghz will be easy with subzero.Quote:
Originally Posted by deachus
I test a few 3110BXXX~3118BXXX from MC and Newegg and ended up with 52X/53X average...could'nt find any good pattern to do same batch hunting with those:(
http://www.xtremesystems.org/forums/...=1#post4936917
yeah i know i was kiddin' im happy with this ones i have now im trying to find a x56 for a friend of the forumQuote:
Originally Posted by Dumo
cheers mate
Sergio
Dumo test the ones i told you from 6 chips min was 2 x54 and rest x55 and x56Quote:
Originally Posted by Dumo
screens as promised
i tested using the UD7, maybe the x56 will get lower volts on the MIVE
http://img560.imageshack.us/img560/2761/p1100902n.jpg
#L045B386 my first one
http://img28.imageshack.us/img28/9434/5600spi32.png
#L045B386 my second one
http://img855.imageshack.us/img855/6...xl045b3864.png
#3103B375 my second one, still didnt force more volts but it tries to go to win on x56, takes more volts than the other for x56
http://img710.imageshack.us/img710/8707/55xc1.png
Regards to all !!!
Serg
Yesterday, I tried setting the LLC to 100%, and I could get down to 1.42v for 50x in bios and while running IBT, on very high the voltage would climb upto 1.44v, and if I set it to 1.41v with 75% LLC, I'm crashing, and I'm almost certain a little while ago I had the chip 100% stable at 1.41v at 50x. I'm wondering is the chip deteriorating? has any one else noticed if their chip needs more volts to get stable at a previously stable clock?
I understand that Andre but unfortunetly they don't have any of those batches at my local MicroCenter or I would have bought them all already. I just sold my 55X 2500K and waiting for my other 2600K to sell. I just got off the phone with MicroCenter and they informed me they are still sold out of 2600K but a truck is bringing a new shipment in tomorrow. I will buy 1 or 2 tomorrow and report back my results, depending on the batches that the truck brings.Quote:
Originally Posted by andressergio
I had some of those same weird problems. I had one chip do 50x100 at 1.42v LLC 75% and it passed 13 runs of LinX maxmem newest linpack before it crashed. I upped voltage one notch and it wouldn't even make one pass in LinX, dropped voltage and it wouldn't make 1 pass in LinX, set LLC to 100% and crash. I don't get it. Sometimes I can pass 10-15 runs LinX at one voltage then can't pass one run of LinX. Weird but I feel it could be heat related due to making all those passes then crashing. I am looking to get a single stage (just missed a good deal for one that holds SB at -30C for $325.00 in For Sale section) and I am also looking to add a second rad to my custom water setup in my 800D. Currently have a 3x120 EK in the top and will probably add a 2x120 in the bottom.Quote:
Originally Posted by i_max2k2
wow deachus some weeks ago no one wanted my batch L045B386 lol as it as no reports on google now i tried 2 and seem awesome batches, there was 1 on ebay but should be more out there for sure, if i spot one i will tell yaQuote:
Originally Posted by deachus
cheers and best of lucks
Sergio
I have it on water too, but not that exotic (XSPC RS 750, RX 240), which keeps it between 70-80C in IBT, and while playing games it rarely goes about 65c. I'm guess I'll put it on high volts and see if it crashes while playing a game for a while or not, and then keep reducing till I feel its stable.Quote:
Originally Posted by deachus
i had some chips that passed linx 20 loops and failed IDLE or on BC2 lmaoQuote:
Originally Posted by deachus
*btw just came a friend with a Z68 UD4 saying "Sergio im tyred of this board all BSOD on idle, i dont get it" LOL ! oh man...
I hate it BC2 hard freeze after 1hour of playing, i know its not the sound card, and i tried the msi afterburner mod , and still freezes gay :\
which online stores do you guys buy your chips from? trying to figure out if a particular store has a specific batch in stock :)
guys you use 100% LLC or 75% ?
what mod ?Quote:
Originally Posted by qgshadow
kinda hard on online stores i would ask the guys selling new in box the batch nr...Quote:
Originally Posted by badatgames18
I don't buy any of my chips online. I get all of my chips from my local Microcenter as they are cheaper then Newegg and I am able to sort through and pick the batch I want.:up:Quote:
Originally Posted by badatgames18
Not sure where you are at but you should see if you have a local MicroCenter.
I use 75% LLC for 24/7 5Ghz, I have done some testing with 100% LLC and the load voltage is crazy high.
the RTCore.dll rename , doesnt work
Well no 2600K's on the truck at MicroCenter today. I guess I will have to wait and see if any come in with Friday's shipment.
uninstall rivatuner, or whatever version u have, restart and put MSI aft beta 6 it will workQuote:
Originally Posted by qgshadow
cheers
Sergio
thanks mate and good luck on your chip searchQuote:
Originally Posted by deachus
My 2600K @ 5.0GHz HT LLC 75% @ 1.46v load for 24/7.Quote:
Originally Posted by andressergio
thanks owi here's mine 75% LLC on my first test 1.408 - 1.416 load (more 1,408 than 1,416) and i bsod 124 aftter passing all 8k loops so it will need 1,416 load constant. so far this is my x56 chip amazing im very happy with itQuote:
Originally Posted by owikh84
http://img196.imageshack.us/img196/103/5ghzblend1.png
Uploaded with ImageShack.us
and still use the rtcore.dll mod?Quote:
Originally Posted by andressergio
i know it isnt the sound card since im using g35. so it must be afterburner :P
ill try beta 6
rtcore its a library like any .dll wich is called from afterburner, there are lots of routines inside so its needed and afterburner installs it, beta 6 its hereQuote:
Originally Posted by qgshadow
remeber its the same author or riva tuner wich uses that same .dll
http://downloads.guru3d.com/-MSI-Aft...load-2777.html
cheers and g luck
Sergio
wtf... great chip mate :eek: :up:Quote:
Originally Posted by andressergio
lol thanks Sauron this is really good aint new its just i never ever primed it lolQuote:
Originally Posted by Sauron_Vie
cheers !
Sergio
Andre, what gadget are you using for the CPU, and if there is one for the GPU saying the core clock and mem speed, do you know one?
Thanks.
Hi all,
For those of you that own the newer Maximus IV Extreme-Z, what have your experiences been?
I need to choose a new Z68 mainboard due to support issues with Asrock (board in sig, great board, poor support), but my concern is that ASUS support may not be that much different. The MIVE-Z is a pretty expensive board, and if I'm going to shell out the cash, I want to make sure I'm unlikely to have any issues, or that if I do, I can get some support from ASUS. I've read a few other threads here that speak of frustration in dealing with ASUS (experiences that sound very much like mine with Asrock), so I'm hoping to get more feedback.
well u have a LOT of feedback on this thread mate even lots of us moving from GIGA to ASUS, if you want the best mobo this is the placeQuote:
Originally Posted by LoneWolf
GENE-Z its a very nice one also
cheers !
Sergio
I already have a large mid-tower case, and I need to fit three PCIe cards (Radeon 6970, X-Fi Titanium, Hauppauge HVR-1800).Quote:
Originally Posted by andressergio
I notice you've used the Gigabyte UD7 in addition to the MIVE-Z. Can you give me a compare/contrast of what you like and don't like?
I'm looking at the MIVE-Z, Gigabyte's UD5, and their UD7. I pretty much have today to make the decision, much longer and I won't be able to return my board to retailer.
Sergio,
new AISuite II V1.02.03 is out today:
ftp://ftp.asus.com.tw/pub/ASUS/misc/...PVistaWin7.zip
can anyone download the new AI ?? for me the link doesn´t work :)Quote:
Originally Posted by stasio
Sauron its working nowQuote:
Originally Posted by Sauron_Vie
cheers !
Sergio
thanks stasio !!!Quote:
Originally Posted by stasio
cheers
Sergio
well if you ask me i would buy the Maximus Extreme Formula 4 P67A B3 instead...we all love this board, amazing volt regulation, amazing BIOS, rock solid, and OC like madQuote:
Originally Posted by LoneWolf
im runing SLI of 580's. u have 2 modes, native and NF200 controlled best is native
MIVE-Z u have to ask zsamz_ he has one but for what i see its like the MIVE
Good luck !
Sergio
New link:Quote:
Originally Posted by Sauron_Vie
ftp://61.63.40.137/pub/ASUS/misc/uti...PVistaWin7.zip
thanks stasio both work but terrible slow, i tried again i get cancelled at 33% :( terrible 15k dldQuote:
Originally Posted by stasio
I thought it was just me. DL speed is horrid. Canceled as well.Quote:
Originally Posted by andressergio
yes same lol 6 hoursQuote:
Originally Posted by Devil_Dog
Damn!!! I thought it was bad @ 3 hours.:rofl:
same linky,
mine finishes in 2hrs... this must be the latest and greatest :D
340mb lol
see there's always something worse lmaoQuote:
Originally Posted by Devil_Dog
lolQuote:
Originally Posted by Hondacity
now 3hs 49min LMAO !!!
4hs 46 min... oh man... :shrug:
quys, just use free download manager
I'm donwloading with 270KB/s ... so about 18 minutes and it's done
MicroCenter got a FedEx shipment in today of 2600K's all newer batches. 3113BXXX and 3117B2XX batches so I grabbed a 3117B295. I know DUMO found a 3117BXXX 55X or 56X chip so I have high hopes. Heading out but will test later tonight and post results.
good luck :D
I may have to take ride out there this weekend.
damn guys if i was there lol u have to tie me to a tree lmaoQuote:
Originally Posted by Devil_Dog
Andre, Afterburner only overclocks one of my card even if i put syncronise every GPU and apply overclock at startup and load a profile for 3d app.
Thats why i used Trixx, do you know a way to make afterburner work fine?
Edit : Holy crap this ftp is slow
Better hurry up, I will be waiting when they open tomorrow to buy the rest. Haha, j/k.:D Just got home, going to power down now and throw in the new chip. Be back with the verdict shortly.Quote:
Originally Posted by Devil_Dog
any one knows a better link to new AI Suite II ?
well its not uploaded on asus website yet...Quote:
Originally Posted by andressergio
Afterburner doesnt work , read earlier post
thanks man
Lol.... and the verdict is?Quote:
Originally Posted by deachus
3114B701 - 53X
3114B382 - 53X air/cold bug:(
3118B529 - 52X
3117B257 - 55X
3103B306 - 54X, (2) 55Xs, (2) 57Xs (1 5750 4C/8T Vantage) and 58X
3101A201 - (4) 53Xs, (4) 54Xs, (4) 55Xs, 56X (5650Mhz 4C/8T Vantage), 57X (5740 4C/8T Vantage) and 58X (5840Mhz 4C/8T Vantage)
The common thing shared by 2600K that able to bench 4C/8T HT on near its Mhz. wall is all 4 cores uniformly stay cool at load
http://img811.imageshack.us/img811/4...enshot050h.jpg