EP45-UD3P

Printable View

Show 100 post(s) from this thread on one page

04-30-2009, 12:25 PM
Eeky NoX

Woww nice temp m8te !! Which cooler PangingIII ?
04-30-2009, 01:05 PM
OC Nub

What kinda temps running small fft's Pangin? Very nice Overclock
04-30-2009, 08:41 PM
pangingIII

Thanks. i use thermalright ultra 120 extreme (silver color one)

Quote:

Originally Posted by Eeky NoX

Woww nice temp m8te !! Which cooler PangingIII ?

Thanks.
it would stay at 75C+ and more for something like ITB test i believe,
i didn't want to run them until i get a better cooling maybe.

Quote:

Originally Posted by OC Nub

What kinda temps running small fft's Pangin? Very nice Overclock
04-30-2009, 08:52 PM
pangingIII

EP45T-UD3R (DDR3), E8400 Thermalright ultra 120 extreme (black color one)

Max CPU FSB ( at CPU multi 7x ) CPU-Z validation on air
http://img245.imageshack.us/img245/4...0428193755.png

Max CPU FSB ( at CPU multi 7x ) 1M SuperPi
http://img204.imageshack.us/img204/5...0428193904.png

Max CPU FSB ( at CPU multi 7.5x ) 1M SuperPi
http://img410.imageshack.us/img410/3...0427174653.png
04-30-2009, 10:09 PM
tonus

Quote:

Originally Posted by OC Nub

Was finally able to get 500fsb Prime blend stable 9 hours, 500x8.5 on my q9550. Took me freakin forever..http://i587.photobucket.com/albums/s...rime500x85.jpg

Please post if you can a full bios template.
05-01-2009, 04:00 AM
OC Nub

******Gigabyte EP45 UD3P******

Robust Graphics Booster.........................[ Auto ]
CPU Clock Ratio.................................[ 8 ]
Fine CPU Clock Ratio............................[ + 0.5 ]
CPU Frequency 4.25GHz............................[ 500x8.5 ]

******Clock Chip Control******

CPU Host Clock Control..........................[ Enabled ]
CPU Host Frequency (Mhz)........................[ 500 ]
PCI Express Frequency (Mhz).....................[ 100 ]
C.I.A 2 [Disabled]

******Advanced Clock Control******

CPU Clock Drive..........................[1000mV]
PCI Express Clock Drive................[1000mV]
CPU Clock Skew..........................[0ps]
MCH Clock Skew..........................[50ps]

******DRAM Performance Control******

Performance Enhance.............................[ Standard ]
MCH Frequency Latch.........................[ 333 ]
System Memory Multipler.........................[ 2.40B ]
Memory Frequency 1066............................[ 1200 ]
DRAM Timing Selectable..........................[ Manual ]

CAS Latency Time................................[ 5 ]
tRCD............................................[ 5 ]
tRP.............................................[ 5 ]
tRAS............................................[ 15 ]

******Motherboard Voltage Control******

Load-Line Calibration...........................[ Enabled ]
CPU Vcore [ 1.12125 ]...................[ 1.350v ]
CPU Termination [ 1.20 ]...................[ 1.320v ]
CPU PLL [ 1.50 ]...................[ 1.450v ]
CPU Reference [ 0.760 ]...................[ .861]

MCH Core [ 1.100 ]...................[ 1.360v ]
MCH Reference [ 0.760 ]...................[ .876 ]
MCH/DRAM Reference [ 0.900 ]...................[ 1.000 ]
ICH I/O [ 1.500 ]...................[1.500 ]
ICH Core [ 1.100 ]...................[ 1.100 ]

DRAM Voltage [ 1.800v]...................[2.100v]
DRAM Termination [0.900v]...................[.920v]
Channel A Reference [0.900v]................[1.000v]
Channel B Reference [0.900v]................[1.000v][/QUOTE]

Channel A&B Driving and Timing Settings OC1200-PL8.
Just got some OCZ Reaper pc2 9600, can't get them to run the rated speed with PL8. My Dominator 1066's will do 1200-PL8.
05-01-2009, 04:18 AM
OC Nub

Quote:

Originally Posted by pangingIII

Thanks. i use thermalright ultra 120 extreme (silver color one)

Thanks.
it would stay at 75C+ and more for something like ITB test i believe,
i didn't want to run them until i get a better cooling maybe.

VERY nice chip you got there Panging. 4.3ghz-506x8.5@1.25v load.
05-01-2009, 06:19 AM
pangingIII

Quote:

Originally Posted by OC Nub

VERY nice chip you got there Panging. 4.3ghz-506x8.5@1.25v load.

sorry for the confusion i uploaded more pics please check my post again for my voltage setting for the overclock.

in fact you have a much better chip than mine, my chip needs a lot more vcore and i believe also more CPU VTT than yours.
05-01-2009, 06:52 AM
tonus

Quote:

Originally Posted by OC Nub

******Gigabyte EP45 UD3P******

Robust Graphics Booster.........................[ Auto ]
CPU Clock Ratio.................................[ 8 ]
Fine CPU Clock Ratio............................[ + 0.5 ]
CPU Frequency 4.25GHz............................[ 500x8.5 ]

******Clock Chip Control******

CPU Host Clock Control..........................[ Enabled ]
CPU Host Frequency (Mhz)........................[ 500 ]
PCI Express Frequency (Mhz).....................[ 100 ]
C.I.A 2 [Disabled]

******Advanced Clock Control******

CPU Clock Drive..........................[1000mV]
PCI Express Clock Drive................[1000mV]
CPU Clock Skew..........................[0ps]
MCH Clock Skew..........................[50ps]

******DRAM Performance Control******

Performance Enhance.............................[ Standard ]
MCH Frequency Latch.........................[ 333 ]
System Memory Multipler.........................[ 2.40B ]
Memory Frequency 1066............................[ 1200 ]
DRAM Timing Selectable..........................[ Manual ]

CAS Latency Time................................[ 5 ]
tRCD............................................[ 5 ]
tRP.............................................[ 5 ]
tRAS............................................[ 15 ]

******Motherboard Voltage Control******

Load-Line Calibration...........................[ Enabled ]
CPU Vcore [ 1.12125 ]...................[ 1.350v ]
CPU Termination [ 1.20 ]...................[ 1.320v ]
CPU PLL [ 1.50 ]...................[ 1.450v ]
CPU Reference [ 0.760 ]...................[ .861]

MCH Core [ 1.100 ]...................[ 1.360v ]
MCH Reference [ 0.760 ]...................[ .876 ]
MCH/DRAM Reference [ 0.900 ]...................[ 1.000 ]
ICH I/O [ 1.500 ]...................[1.500 ]
ICH Core [ 1.100 ]...................[ 1.100 ]

DRAM Voltage [ 1.800v]...................[2.100v]
DRAM Termination [0.900v]...................[.920v]
Channel A Reference [0.900v]................[1.000v]
Channel B Reference [0.900v]................[1.000v]

Channel A&B Driving and Timing Settings OC1200-PL8.
Just got some OCZ Reaper pc2 9600, can't get them to run the rated speed with PL8. My Dominator 1066's will do 1200-PL8.[/QUOTE]

Thanks
05-01-2009, 06:58 AM
Revv23

Can someone help me with these UD3 models?

There are now 8 of them on Newegg.

I just want the one tat has full feature overclocking and no other bells and whistles.

It's not like me to ask questions of this nature but ive been looking for over an hour and I still cant' sort them all out.

Thanks.
05-01-2009, 08:11 AM
Homeless2

Can someone with 2x2gb pc8500 OCZ reapers post their settings? I just got these yesterday and can't seem to get them to run anything under CAS 5 PL10
05-01-2009, 08:26 AM
pangingIII

EP45T-UD3R F6, Q9550 510x8.5 4,335MHz air-cooled

http://img13.imageshack.us/img13/669...0501222951.png

http://img13.imageshack.us/img13/267...0501231854.png

http://img13.imageshack.us/img13/954...0501234217.png

http://img13.imageshack.us/img13/611...0501235408.png
05-01-2009, 08:43 AM
bluestang

Quote:

Originally Posted by Revv23

Can someone help me with these UD3 models?

There are now 8 of them on Newegg.

I just want the one tat has full feature overclocking and no other bells and whistles.

It's not like me to ask questions of this nature but ive been looking for over an hour and I still cant' sort them all out.

Thanks.

For DDR2 get:
http://www.newegg.com/Product/Produc...82E16813128359 or
http://www.newegg.com/Product/Produc...82E16813128358

For DDR3 get:
http://www.newegg.com/Product/Produc...82E16813128369
05-01-2009, 09:32 AM
The Viper

Heh bluestang, how do you like that F9 Bios for the UD3R?
05-01-2009, 01:30 PM
OC Nub

Quote:

Originally Posted by pangingIII

sorry for the confusion i uploaded more pics please check my post again for my voltage setting for the overclock.

in fact you have a much better chip than mine, my chip needs a lot more vcore and i believe also more CPU VTT than yours.

I was looking at CPUZ, says VID not core voltage my bad, not use to seeing that there. Still a very nice oc, I haven't been able to get 4.3ghz stable on my 9550. If I give it much more vcore I cant keep my temps down.
05-01-2009, 09:53 PM
bt_medic04

well the computer i built for my buddy using my old GA965P DQ6 bit the dust (capacitor went bad) soooooooooo.....i used that as an excuse to sell him my X38-DQ6 (at an awesome deal for my friend $60) and buy myself an EP45-UD3P...... i cant wait to see what this board is all about :)
05-02-2009, 12:21 AM
thebluemeanie1

Does SetFSB work with the EP45-UD3P and if so which clock generator should I use?

Also do the new BIOS revisions help with high(520+) quadcore FSB at all?
05-02-2009, 01:53 AM
Lsdmeasap

Here is the clockgen you want for UD3P >>
ICS 9LPRS914EKLF
05-02-2009, 04:05 AM
NapalmV5

ud3p/1.2875vider/thermalright ifx14/gtx285/areca1231/4xssd

http://img364.imageshack.us/img364/442/69412646.png

more than "justa screenshot" ;)

i could probably get it to bench nicely @ 4.8 if time permits..
05-02-2009, 04:58 AM
Blue Storm

Quote:

Originally Posted by NapalmV5

ud3p/1.2875vider/thermalright ifx14/gtx285/areca1231/4xssd

http://img364.imageshack.us/img364/442/69412646.png

more than "justa screenshot" ;)

i could probably get it to bench nicely @ 4.8 if time permits..

very nice result with air cooling:clap:
05-02-2009, 07:52 AM
bluestang

Quote:

Originally Posted by The Viper

Heh bluestang, how do you like that F9 Bios for the UD3R?

Seems better than F7 & F8. But what do I know! I'm still trying to get 8.5x500 FSB w/1200-1225 RAM. I'llbe replacing my RAM and HD this weekend along with the fan on my Zerotherm FZ120 and adding some AS5 paste. Then I'll start tweaking
05-02-2009, 09:07 AM
The Viper

Quote:

Originally Posted by Lsdmeasap

Here is the clockgen you want for UD3P >>
ICS 9LPRS914EKLF

Heh Lsdmeasap: Is that the same clockgen for the UD3R?

Thanks for the info bluestang
05-02-2009, 09:38 AM
coop

I have been trying to get 32m with only 1.375v and finally got it last night. Bios info incl. I wanted to use lowest volts. possible. KHX 9600 rams.
[IMG]http://img67.imageshack.us/img67/7871/32m11375.jpg[/IMG]

Code:

MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: Auto CPU Clock Ratio .......................: 9 CPU Frequency .........................: 4.707GHz (523X9) Clock Chip Control Standard Clock Control CPU Host Clock Control.................: [Enabled] CPU Host Frequency (Mhz) ..............: 523 PCI Express Frequency (Mhz) ...........: 100 C.I.A.2 ...............................: [Disabled] Advanced Clock Control CPU Clock Drive........................: 800 PCI Express Clock Drive................: 800 CPU Clock Skew (ps)....................: 50ps MCH Clock Skew (ps)....................: 50ps DRAM Performance Control Performance Enhance....................: Turbo Extreme Memory Profile (X.M.P.)........: Disabled (G)MCH Frequency Latch.................: 333MHz System Memory Multiplier ..............: 2.40D Memory Frequency (Mhz) ................: 1255MHz DRAM Timing Selectable ................: Manual Standard Timing Control CAS Latency Time.......................: 5 tRCD ..................................: 5 tRP'...................................: 5 tRAS...................................: 15 Advanced Timing Control Everything In Advanced Timing Control on auto. but tRFC 56 and Drive Strength Profiles OC-1200 DDR Write Training: Disable Motherboard Voltage Control CPU Load-Line Calibration..................: [Disabled] CPU Vcore..............................: 1.375V CPU Termination........................: 1.34V CPU PLL................................: 1.61V CPU Reference..........................: 0.873 MCH/ICH MCH Core...............................: 1.34V Reference..............................: 0.768* MCH/DRAM Ref...........................: 0.910v ICH I/O................................: 1.5V ICH Core...............................: 1.100V DRAM DRAM Voltage...........................: 2.24v DRAM Termination ......................: Auto Channel A Reference....................: Auto Channel B Reference ...................: Auto
05-02-2009, 10:48 AM
radaja

very nice coop!
05-02-2009, 12:25 PM
Eeky NoX

@Leeghoofd: I'm eatin' my nuts on the dividers with my crucials mate !!

Even reached 1800 (cas10 lol) @450FSB and 2,18 vDimm (with the F6 bios and a E8600)
I'm following your I4 datasheet and improving it a bit :D than I'll post my results here when it'll be ready.

What I can say ATMO is that the dividers and the FSB don't react simply ^^ ...what's passed @400 or 450 isn't @425 :/

Risin' thru the night (500+), tweakin' tomorow if I'm not dry xD

Show 100 post(s) from this thread on one page

** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

Official Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P