I have new serial of Elpida on G.Skill ripjaws 2000C9-4GBRHD (test with 1.65V)
Elpida EBSE not BBSE :eek:
http://www.picza.net/uppic/pic/2011_...14ddd57d16.jpg
Thanks: Ro ฝากรูป
http://www.picza.net/uppic/pic/2011_...c5024e8a93.jpg
Thanks: Ro ฝากรูป
http://www.picza.net/uppic/pic/2011_...9777e99faa.jpg
Thanks: Ro ฝากรูป
http://www.picza.net/uppic/pic/2011_...043f8ffa06.jpg
Thanks: Ro ฝากรูป
http://www.picza.net/uppic/pic/2011_...7c947fc8d0.jpg
Thanks: Ro ฝากรูป
:o 2100+ 8.9.8 1.65V looks really good :D Have you tried them at 1600/1800? (timings)
1600 and 1800Quote:
Originally Posted by gregorisvas
http://www.picza.net/uppic/pic/2011_...2bb25c7753.jpg
Thanks: Ro ฝากรูป
http://www.picza.net/uppic/pic/2011_...8afcea90ef.jpg
Thanks: Ro ฝากรูป
You said they all started with X.. :p:Quote:
Originally Posted by hiwa
Yes I know those are PSC mate, just teasing hiwa a bit! ;)Quote:
Originally Posted by theix
While you said many things back then, you never said that... :p: :rofl:Quote:
Originally Posted by websmile
No idea about the GeIL kit in question, but they used these OEM Elpida chips as well on their 2133 C9 kits ( Ultra Series and Black Dragon ).
Of course I said that :p: - would be weird PSC that do 1140 9-9-9 and 1200 9-10-9-24 :DQuote:
Originally Posted by Don_Dan
BTW, @topic, my 24/7 Ripjaw 2000 9-9-9- they run worse than my 2000 trident who had the honour to be my worst mems before, but who cares -better than nothing :)
http://www.abload.de/thumb/gbrhrijaw...0c732mm8di.jpg
I just noticed that the XMP profile in my modules is set @ 1.60Vdimm? :S Factory issue or something else?
Seems to vary randomly, the Ripjaws are labeled as 9-9-9-27 at 1,6V and have this XMP, the Trident 2000 I have are labeled exactly the ssame and have XMP at 1,60V- I donīt see any methodical difference^^
Mine are labeled 9-9-9-27 1.65V that's why I'm asking :D
I don't know if there is a real difference / as said these Tridents are labeled the same as my Ripjaws at specs, but XMP is different, you can see it on the screen
http://www.abload.de/thumb/g-skilltr...917-9-drxp.jpg
The fact the tridents run a bit better can be normal oc-range - as the great poets from Limp Bizkit said - results may vary :D
sorry to post on an old thread, but are most or all tridents bbse? are some PSC?
i have two set of 2x2gb 9-9-9-27 tridents... i was hoping to run them both for 8gb but i'm not sure how it will effect it's overclockability... looking for atleast 2133 cas 8 or 7 for 24/7
EDIT: oh btw.. mine are 2000 9-9-9-27... i have a couple sets of them
Pretty sure my Trident 2133 9-9-9 are PSC. Havent looked but they scale to 1.74v and will do 2250 @ 7-9-7 for benching. Wish I could find another set.
well here is what i can do so far for 24/7
vdimm@1.65v
vccio@1.165v
http://img225.imageshack.us/img225/783/superpi32mm.png
http://img28.imageshack.us/img28/4084/superpi1mm.png
Stay away from the EVGA P67 FTW board, until they fix the crappy bios.... plus memory scales terribly... same set does 7-9-7 2200MHz w/same volts on my ud7.
Anyone recommend anything better for 24/7 clocks? (<160 usd)
u can try lower vccio o think
lowered to 1.14v... still stable, not sure how low i should go... it's a pain applying my overclock again on this board so i don't want to lose it :p:Quote:
Originally Posted by hiwa
Do you have any recommendations on ram that is less than 160 USD that's good for 24/7 use and benching?
I am returning this motherboard and buying a MIVE, very bad memory overclocking
go with this 16gb if u want high capacity and u want enjoy oc with 8 and 16gb memories, they don't have very good oc caz they should be nanya i never used them but just heart people forget sniper series if u want OC
http://www.newegg.com/Product/Produc...82E16820231456
go with this if u like oc 8gb and good freq
http://www.newegg.com/Product/Produc...82E16820231476
this kit if u want fly but 4gb
http://www.newegg.com/Product/Produc...82E16820231454
for 8gb 9-11-10 isn't that good is it? if i try to get higher freq... would i need to loosen the timings more?Quote:
Originally Posted by hiwa
looks interesting... i might buy and i'll post what results i get...
thanks!
the F3-17000CL9D-8GBXM are very nice memories and they are very good Hynix ICs if u are lucky u will enjoy nice oc with them, maybe u can show 2200 same timing same voltage.
Update us
I picked up 2 kits of CMX4GX3M2A2000C9, 2000 9-9-9. Was on sale for $35 per 4GB kit so I couldnt resist. Will post results shortly.
excited to see the results! i was thinking of buying these also...Quote:
Originally Posted by Eldonko
on another note i found some: SuperTalent Project X W1800UX2GBP?
1800 7-7-7
that someone just offered to sell me, but i have no idea what ic they use... he can't find a link, and neither can i that lists the specs.:shrug:
they are hypers and very nice but fragile memories, if i am not wrong that series must be MNH ic
/Thread Revival: on
These are my results :) Nothing special, i'm just happy about it cause i got 'em cheap :p
http://www.hwbox.gr/attachments/memo...nimes-2214.jpg
/Thread Revival: off