EP45-UD3P

Printable View

Show 100 post(s) from this thread on one page

03-10-2009, 10:00 AM
radaja

i know but it was mainly for me as a quick reference for when i change my vtt alot,i can quickly see if i set the cpu and mch ref right,for what my cpu and boards likes.heres a more full table.maybe someone can make a better graph with these numbers(easier to understand)everytime i try to post it here it seems to shift things around.

ET6 0.730 / 0.745 / 0.760 \ 0.785 \ 0.800

vtt 1.20 0.730 / 0.745 / 0.760 \ 0.785 \ 0.800
vtt 1.22 0.742 / 0.757 / 0.772 \ 0.797 \ 0.812
vtt 1.24 0.755 / 0.770 / 0.785 \ 0.810 \ 0.825 CPU reference value in bios
vtt 1.26 0.768 / 0.783 / 0.798 \ 0.823 \ 0.838
vtt 1.28 0.780 / 0.795 / 0.810 \ 0.838 \ 0.850
vtt 1.30 0.793 / 0.808 / 0.823 \ 0.848 \ 0.863
vtt 1.32 0.806 / 0.821 / 0.836 \ 0.861 \ 0.876
vtt 1.34 0.818 / 0.833 / 0.848 \ 0.873 \ 0.888
vtt 1.36 0.831 / 0.846 / 0.861 \ 0.886 \ 0.901
vtt 1.38 0.844 / 0.859 / 0.874 \ 0.899 \ 0.914
vtt 1.40 0.856 / 0.871 / 0.886 \ 0.911 \ 0.926
vtt 1.42 0.869 / 0.884 / 0.899 \ 0.924 \ 0.939
vtt 1.44 0.882 / 0.897 / 0.912 \ 0.937 \ 0.952

vtt 1.20 0.720 / 0.740 / 0.760 \ 0.800 \ 0.840
vtt 1.22 0.732 / 0.752 / 0.772 \ 0.812 \ 0.852
vtt 1.24 0.745 / 0.765 / 0.785 \ 0.825 \ 0.865 MCH reference value in bios
vtt 1.26 0.758 / 0.778 / 0.798 \ 0.838 \ 0.878
vtt 1.28 0.770 / 0.790 / 0.810 \ 0.850 \ 0.890
vtt 1.30 0.783 / 0.803 / 0.823 \ 0.863 \ 0.903
vtt 1.32 0.796 / 0.816 / 0.836 \ 0.876 \ 0.916
vtt 1.34 0.808 / 0.828 / 0.848 \ 0.888 \ 0.928
vtt 1.36 0.821 / 0.841 / 0.861 \ 0.901 \ 0.941
vtt 1.38 0.834 / 0.854 / 0.874 \ 0.914 \ 0.954
vtt 1.40 0.846 / 0.866 / 0.886 \ 0.926 \ 0.966
vtt 1.42 0.859 / 0.879 / 0.899 \ 0.939 \ 0.979
vtt 1.44 0.872 / 0.892 / 0.912 \ 0.952 \ 0.992
the
middle
column
will
always
show
0.760
in ET6
03-10-2009, 01:23 PM
zyfer

EP45-UD3P VS. P5Q Deluxe P45

Hello everyone.:)

What is the difference between these Motherboard.

I have been writting with someone who has P5Q Deluxe P45, and he has no problems with the graphics card. It also do a considerably bedere result on the CPU at the same speed ..

http://www.hwbot.org/result.do?resultId=826826

If i do 4,6Ghz and 1200Mhz on ram, i can get max 64xx-66xx in cpu score. Even with very high voltages.....I max out at 4,85GHz whit a score at 68xx...

Is this motherboard really that bad ...:(:(
03-10-2009, 01:29 PM
neo mike

pang

Nice clocks and decent everest score, wow i cant believe your on first bios, looks pretty good, yeah ddr3 is much better than ddr2 thats for sure, im glad i made the switch to ddr3.
03-10-2009, 03:59 PM
radaja

could somebody help me out?im not good with memory timings but i want to get the best performance out of these g.skil 9600's 2x2GB.would someone be so kind as to fill out this template for me with performance type settings,doesnt matter if its too tight for stability ill mess around with it.i just dont really know which one to change. thank you

Performance Enhance.............................[Standard]
Extreme Memory Profile (XMP)....................[ Auto ]
(G) MCH Frequency Latch.........................[ 266 ]
System Memory Multiplier........................[ 2.50A ]
Memory Frequency ..............1066.............1275
DRAM Timing Selectable..........................[ Manual ]

CAS Latency Time...............[ 5 ].........[ ]
tRCD...........................[ 5 ].........[ ]
tRP............................[ 5 ].........[ ]
tRAS...........................[ 15 ].........[ ]

******Advanced Timing Control******

tRRD...........................[ auto ]..........[ ]
tWTR...........................[ auto ]..........[ ]
tWR............................[ auto ]..........[ ]
tRFC...........................[ 55 ].........[ ]
tRTP...........................[ auto ]..........[ ]
Command Rate (cmd).............[ auto ]..........[ ]

******Channel A Timing Settings******

Static tRead Value [ 8 ] ................[ 8 ]
tRD Phase0 Adjustment [ 0 ] ................[ ]
tRD Phase1 Adjustment [ 0 ] ................[ ]
tRD Phase2 Adjustment [ 0 ] ................[ ]
tRD Phase3 Adjustment [ 0 ] ................[ ]

tRD 2rd (Differnt Rank) [ auto ] ................[ ]
tWR 2wr (Differnt Rank) [ auto ] ................[ ]
tWR 2rd (Differnt Rank) [ auto ] ................[ ]
tRD 2wr (Same/Difft Rank) [ auto ] ................[ ]

Dimm 1 Clock Skew Control.......................[ Auto ]
Dimm 2 Clock Skew Control.......................[ Auto ]
DDR Write Training..............................[ Auto ]

******Channel A Driving Settings******

Drive Strength Profile..........................[ Auto ]
Data Driving Pull Up Level......................[ Auto ]
cmd Driving Pull Up Level.......................[ Auto ]
ctrl Driving Pull Up Level......................[ Auto ]
clk Driving Pull Up Level.......................[ Auto ]

Data Driving Pull Down Level....................[ Auto ]
cmd Driving Pull Down Level.....................[ Auto ]
ctrl Driving Pull Down Level....................[ Auto ]
clk Driving Pull Down Level.....................[ Auto ]

******Channel B Timing Settings******

Static tRead Value [ 8 ] ................[ 8 ]
tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
tRD Phase3 Adjustment [ 0 ] ................[ Auto ]

tRD 2rd (Differnt Rank) [ Auto ] ................[ ]
tWR 2wr (Differnt Rank) [ Auto ] ................[ ]
tWR 2rd (Differnt Rank) [ Auto ] ................[ ]
tRD 2wr (Same/Difft Rank) [ Auto ] ................[ ]

Dimm 1 Clock Skew Control.......................[ Auto ]
Dimm 2 Clock Skew Control.......................[ Auto ]
DDR Write Training..............................[ Auto ]

******Channel B Driving Settings******

Drive Strength Profile..........................[ Auto ]
Data Driving Pull Up Level......................[ Auto ]
cmd Driving Pull Up Level.......................[ Auto ]
ctrl Driving Pull Up Level......................[ Auto ]
clk Driving Pull Up Level.......................[ Auto ]

Data Driving Pull Down Level....................[ Auto ]
cmd Driving Pull Down Level.....................[ Auto ]
ctrl Driving Pull Down Level....................[ Auto ]
clk Driving Pull Down Level.....................[ Auto ]
03-10-2009, 05:00 PM
529th

Hi, I am in the pre-build stages of getting my UD3R up and running. I will be running the chip under a water loop; and i currently have a MIIF 1901 bios board. My question is, I am wondering what is the equivalent function in the UD3R of the Ai Clock Twister on the Asus MIIF board - thanks :)
03-10-2009, 05:07 PM
radaja

maybe driving strength profile?.isnt ai clock twister the one that i moderate/strong/stronger?
03-10-2009, 05:15 PM
529th

Quote:

Originally Posted by radaja

maybe driving strength profile?.isnt ai clock twister the one that i moderate/strong/stronger?

yes

what is it under in the UD3 Gigabyte boards?
03-10-2009, 05:18 PM
radaja

this is the closest thing i can find.performance enhance goes standard/turbo/extreme i think?

******DRAM Performance Control******

Performance Enhance.............................[Standard]
Extreme Memory Profile (XMP)....................[ Auto ]
(G) MCH Frequency Latch.........................[ 333 ]
System Memory Multiplier........................[ 2.40B ]
Memory Frequency ..............1066.............1020
DRAM Timing Selectable..........................[ Manual ]
03-10-2009, 05:24 PM
529th

Ok, thanks much!
03-10-2009, 05:40 PM
INFRNL

Quote:

Originally Posted by 529th

Ok, thanks much!

Glad to see you joined the team finally. Did you end up getting a Gigabyte UD3p for your 9650? You should love it.

I was just coming to re-read for help on my 9550. I have my 9550 running at 4.25ghz but want to try for 4.5ghz. Just cant remember all the settings, LOL.
03-10-2009, 05:56 PM
529th

Quote:

Originally Posted by INFRNL

Glad to see you joined the team finally. Did you end up getting a Gigabyte UD3p for your 9650? You should love it.

I was just coming to re-read for help on my 9550. I have my 9550 running at 4.25ghz but want to try for 4.5ghz. Just cant remember all the settings, LOL.

WOW, hey man! Long time no hear :)

I am hanging onto my MIIF board as well. I did buy another Q9650 though for this hopeful UD3R :up: - sold off my i7 for 240 to a local guy - haha; and I am trying to squeeze the loop in my PC-60 case! got any shoe horns i can borrow!? lol ; going to use a 655 with a micro res v2 1/2 id and a MCR 220 QP

I did manage to get 480fsb with some help from over here but I think 500+fsb will be impossible cause of the geometry of design-specifics
03-10-2009, 05:57 PM
529th

Why do i end up logged out after 5 or so minutes when I don't want to log out?
03-10-2009, 06:18 PM
radaja

well heres my 24/7 setup.with voltages im comfortable with.
http://i44.tinypic.com/2v3fo6d.jpg
03-10-2009, 06:35 PM
INFRNL

Quote:

Originally Posted by 529th

WOW, hey man! Long time no hear :)

I am hanging onto my MIIF board as well. I did buy another Q9650 though for this hopeful UD3R :up: - sold off my i7 for 240 to a local guy - haha; and I am trying to squeeze the loop in my PC-60 case! got any shoe horns i can borrow!? lol ; going to use a 655 with a micro res v2 1/2 id and a MCR 220 QP

I did manage to get 480fsb with some help from over here but I think 500+fsb will be impossible cause of the geometry of design-specifics

Why did you sell your I7; Im thinking about buying another one or maybe another 9550 or 9650. working on a NAS/ Crunching machine. I try to stay off the forums lately because I get stuck buying uneccessary stuff from the hot deals section after researching around the forums. So my H20 might be on hold for a few months. Now I am thinking about swapping out my ati gpus for nvidia to help my FAH. This is exactly why I havent been around much lately, lol. too many opions and crazy thoughts in my head.

Good luck with this board. I am now currently running my9550 on this board at 4.25ghz which is 500*8.5. want to push for more. This is also with my OCZ Vendetta 2. Temps are a bit higher now that the board is in a case, but still not bad. I think loaded temps are around 45*c will have to verify. I need to add some better fans to the case. keep in touch

Quote:

Originally Posted by radaja

well heres my 24/7 setup.with voltages im comfortable with.
http://i44.tinypic.com/2v3fo6d.jpg

Nice results Radaja! Can you post the template of your final bios settings for me please? even though you are on a 9650 you are right in my ballpark of what I need. Thanks
03-10-2009, 09:01 PM
LiquidReactor

Did Gigabyte finally fix the issue with 2.40B and MCH Vcore of above 1.4V?
03-10-2009, 10:02 PM
radaja

INFRNL,here you go.hope it helps.

Code:

******************************************************* MB Intelligent Tweaker(M.I.T.) ******************************************************* Robust Graphics Booster ..............: Auto CPU Clock Ratio ......................: 8.5x CPU Frequency ........................: 4.30GHz (506x8.5) ************** Clock Chip Control ************** >>>>>> Standard Clock Control CPU Host Clock Control................: Enabled CPU Host Frequency (Mhz) .............: 506 PCI Express Frequency (Mhz) ..........: 100 C.I.A.2 ..............................: Disabled >>>>>> Advanced Clock Control.........: [Press Enter] CPU Clock Drive.......................: 1000mV PCI Express Clock Drive...............: 1000mV CPU Clock Skew (ps)...................: 0ps MCH Clock Skew (ps)...................: 50ps *********** DRAM Performance Control *********** Performance Enhance...................: Turbo (G)MCH Frequency Latch................: 266 System Memory Multiplier .............: 2.50A Memory Frequency (Mhz) ...............: 1265 DRAM Timing Selectable ...............: Manual >>>>>> Standard Timing Control CAS Latency Time......................: 5 tRCD .................................: 5 tRP...................................: 5 tRAS..................................: 15 >>>>>> Advanced Timing Control........: [Press Enter] tRRD..................................: Auto tWTR..................................: Auto tWR...................................: Auto tRFC..................................: 55 tRTP..................................: Auto Command Rate (CMD) ...................:Auto >>>>>> Channel A Timing Settings......: [Press Enter] Static tRead Value....................: 8 tRD Phase0 Adjustment.................:Auto tRD Phase1 Adjustment.................:Auto tRD Phase2 Adjustment ................: Auto tRD Phase3 Adjustment.................: Auto Trd2rd(Different Rank)................: Auto Twr2wr(Different Rank)................: Auto Twr2rd(Different Rank)................: Auto Trd2wr(Same/Diff Rank)................: Auto Dimm1 Clock Skew Control (ps).........: Auto Dimm2 Clock Skew Control (ps).........: Auto DDR Write Training....................: Auto >>>>>> Channel A Driving Settings.....: [Press Enter] Driving Strength Profile..............: Auto Data Driving Pull-Up Level............: Auto Cmd Driving Pull-Up level.............: Auto Ctrl Driving Pull-Up Level............: Auto Clk Driving Pull-Up Level.............: Auto Data Driving Pull-Down Level..........: Auto Cmd Driving Pull-Down level...........: Auto Ctrl Driving Pull-Down Level..........: Auto Clk Driving Pull-Down Level...........: Auto >>>>>> Channel B Timing Settings......: [Press Enter] Static tRead Value....................: 8 tRD Phase0 Adjustment.................: Auto tRD Phase1 Adjustment.................: Auto tRD Phase2 Adjustment ................: Auto tRD Phase3 Adjustment.................: Auto Trd2rd(Different Rank)................: Auto Twr2wr(Different Rank)................: Auto Twr2rd(Different Rank)................: Auto Trd2wr(Same/Diff Rank)................: Auto Dimm1 Clock Skew Control (ps).........: Auto Dimm2 Clock Skew Control (ps).........: Auto DDR Write Training....................: Auto >>>>>> Channel B Driving Settings.....: [Press Enter] Driving Strength Profile..............: Auto Data Driving Pull-Up Level............: Auto Cmd Driving Pull-Up level.............: Auto Ctrl Driving Pull-Up Level............: Auto Clk Driving Pull-Up Level.............: Auto Data Driving Pull-Down Level..........: Auto Cmd Driving Pull-Down level...........: Auto Ctrl Driving Pull-Down Level..........: Auto Clk Driving Pull-Down Level...........: Auto ********* Motherboard Voltage Control ********* Voltage Types...........Normal..........Current ----------------------------------------------- >>>>>> CPU Load-Line Calibration.................: Disabled CPU Vcore..............1.31250v.......: 1.418V CPU Termination........1.200v.........: 1.38V CPU PLL................1.500v.........: 1.57V CPU Reference..........0.780v.........: 0.899 >>>>>> MCH/ICH MCH Core...............1.100v.........: 1.420V MCH Reference..........0.800v.........: 0.914 MCH/DRAM Ref...........0.900v.........: Normal ICH I/O................1.500v.........: Normal ICH Core...............1.100v.........: Normal >>>>>> DRAM DRAM Voltage...........1.800v.........: 2.1600V DRAM Termination.......0.900v.........: Normal Channel A Reference....0.900v.........: Normal Channel B Reference....0.900v.........: Normal
03-10-2009, 10:11 PM
Hoss331

Quote:

Originally Posted by LiquidReactor

Did Gigabyte finally fix the issue with 2.40B and MCH Vcore of above 1.4V?

Not that im aware of, im using the latest bios and it still will not boot when preset in the bios.
03-11-2009, 02:04 AM
kintaro

Hi
Finaly last night i manage to set up my new rig:
EP45-UD3P bios F9
Intel QX 9770
1x320GB WD
2X1GB Team Xtreem DDR2 PC2-10400 1300MHz
Sapphire radeon 4870X2
Vista Ultimate x64
Scythe Mugen 2
CoolerMaster Real Power M1000 PSU (1000W)

Boot at optimized defults vcore=1.1500 and mem at 1200MHz.
the only amazing thing for me was cpu temp=20-17-19-20 at idle.
run wprime 32 and 1024 everything fine and max temp 28c.

i'll revert with screenshots and every sugestion welcome.
i'm wondering if this board can support this current hungry cpu at high clocks.
03-11-2009, 02:07 AM
zyfer

Pcie-16

Quote:

Originally Posted by andressergio

*radaja

Sorry i didnt post yet im having now same problem as zyfer...

I had the MF2 with the 8800 ultra at 756/1782/2304 vmoded vgpu at 1,48 and vmem at 2,24 runing perfect...

Now i cant even do the same with 1,52 vgpu and vmem 2,25 :(

On the MF2 12V rail read 12.10V now on the UD3P reads 11,92...

Im really lost on this, i have very good CPU speed but crap graphics...

Its not drivers i tested newer and old ones and both VISTA 64SP1 and XP64 SP2 ----I have my doubts on the PSU but should do the work its a TT Toughpower 850W...

Cheers
Sergio

Hello again ..

I've tried to put the graphic card in the lower port2 (x8), and run 3dmark06. There after, back in port1 (x16). I get the same result in both ports, it should run significantly faster in port1 (x16) but do not???...

Are there others who have this problem, and maybe a solution ...:)
03-11-2009, 05:26 AM
cholo777

shi there

Quote:

Originally Posted by EliTE22

so, are you trying to get high ram clocks for 1: 24/7, 2: benching??? any D9 ics 2GB kits should clock great. what voltage was use for all the kits above? i would think u could get higher than 1100Mhz with cas5, my powerchip ics corsair dom pc2 8500 ver4.1 could do 1200 cas5 and both my corsair dom 8500 ver1.2 D9s:D do around 1340Mhz and 1350Mhz cas5,

sorry it took me so long to come back to you,i am looking for 24/7 use, something that is stable, i never put too many volts through my kits to be honest.
corsair kit was 2.1volts - think i sold them to early - but i am bit inexperienced
crucial ballistix 2.0 volts
crucial balistix led's 2.0 volts
ocz reapers 2.2 volts - they were unstable at 1100mhz to be honest

got some more coming lol,
cellshock pc2-6400c5
adata pc2-8500
both 2 gig kits
think i need to sell some

any help or advice would be great - might need ram cooling aswell
regs
paul
03-11-2009, 08:46 AM
kintaro

1 Attachment(s)

This is the first screenshot with minimum volt on everyting in order to pass
wprime and super pi.
03-11-2009, 09:25 AM
stasio

New BIOS:

GA-EP45-UD3P - F9b Released 11.03.09
03-11-2009, 09:27 AM
systemviper

Quote:

Originally Posted by stasio

New BIOS:

GA-EP45-UD3P - F9b Released 11.03.09

thanks got it!
03-11-2009, 09:39 AM
kintaro

1 Attachment(s)

this is with max multiplier 16x at stock speed.
03-11-2009, 10:30 AM
PortCitySlim

Quote:

Originally Posted by stasio

New BIOS:

GA-EP45-UD3P - F9b Released 11.03.09

Where do you guys get these from? I can not get on Gigabyte's website

Show 100 post(s) from this thread on one page

** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

Official Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P