E8600, Asus P5Q Deluxe, HK3.0, PA120.3, MCP655 + EK Top, EK 250 Res, HR-09 U+S on Mosfets, HR-05 on NB and SB, Corsair 8500C5D x 8G, EVGA 7900 GS KO, Thermaltake 1200w, Top Deck Techstation, Raptor 150G RAID0, Plextor 755A SATA Optical, Dell 1907FP 19"
Yes, the pic shows the vertical orientation.
XSPX RX360 - Nanofluid - Laing DDC/MCP355 Tops - 120 vs. 140 radiator - Temps in relation to Flowrates - EK Supreme orientation on i7 - Stacked Radiators - Triple-Radiator roundup - Waterblocks on i7 - Triple DDR3 Roundup - OCZ Hydroflow i7 mod - EVGA Classified MB blocks - Huge Radiators - Rampage II Extreme MB blocks - Flowmeters
Thank you for the confirmation. On socket 775 is the orientation similar in that the outlet should be closest to the bank of I/O ports?
E8600, Asus P5Q Deluxe, HK3.0, PA120.3, MCP655 + EK Top, EK 250 Res, HR-09 U+S on Mosfets, HR-05 on NB and SB, Corsair 8500C5D x 8G, EVGA 7900 GS KO, Thermaltake 1200w, Top Deck Techstation, Raptor 150G RAID0, Plextor 755A SATA Optical, Dell 1907FP 19"
I honestly don't know about 775 since I only tested this block on i7.
A 775's die is completely different from an i7's so I can't give you an estimate. I can suggest one of two courses of action, though:
1. Test it.
2. Don't bother. The temp difference is going to be minimal anyway.
XSPX RX360 - Nanofluid - Laing DDC/MCP355 Tops - 120 vs. 140 radiator - Temps in relation to Flowrates - EK Supreme orientation on i7 - Stacked Radiators - Triple-Radiator roundup - Waterblocks on i7 - Triple DDR3 Roundup - OCZ Hydroflow i7 mod - EVGA Classified MB blocks - Huge Radiators - Rampage II Extreme MB blocks - Flowmeters
I'll give 'er a try and see. Thanks again.
E8600, Asus P5Q Deluxe, HK3.0, PA120.3, MCP655 + EK Top, EK 250 Res, HR-09 U+S on Mosfets, HR-05 on NB and SB, Corsair 8500C5D x 8G, EVGA 7900 GS KO, Thermaltake 1200w, Top Deck Techstation, Raptor 150G RAID0, Plextor 755A SATA Optical, Dell 1907FP 19"
Bookmarks