OCZ PC3200 Gold new BH5 die

[ArcTan]

whats car high affected by?
I'm at 134.9 with a 9500pro

[andL64]

only cpu and memory affected but still need good tight timings and little bit gpu

[eva2000]

the ati XL is doing "nothing" in car...
Also SLI isnt needed....


maybe ure right and the higher fsb and winchester is faster but it still seems zo me in 3D benches scores gets better with ~300+ 2,5-3-3-6 little tweaked than 2-2-2-2 @ ~250+

seEn

depends on overall system and we are comparing different cards

i.e. this is 3700+ @2720mhz single channel memory @272mhz 2-2-2-6 with my 9800Pro

[Jack]

eva2000 what is the highest clock you can get out of this memory?

[eva2000]

eva2000 what is the highest clock you can get out of this memory?

depends on tight Trc or loose Trc ? with max async latency fixed at 7ns or looser i.e. 8ns ? so far seems with Trc of 11-12 max is around 260-263mhz 2-2-2-6 with Trc of 9-10 is around 260mhz 2-2-2-6 both with max async latency of 7ns. Memtest hand a few errors @266mhz 2-2-2-6 so with burn in probably that's what I'm aiming for

but with max async latency of 8ns could do a few benchies i.e. superpi 1m at 266-270mhz 2-2-2-6 but not stable.

so i'd say 260mhz

[Jack]

ok, thanks for the explanation

[andL64]

edit: ok i ll find out... sry for OT

seEn

[eva2000]

he you guys could help me with my tccd? its memtest stable A-DAta TCCD 2x512Mb @ 2,5-3-3-6 with 2 diffrent settings i played yesterday out but still in windows i get BSODs and errors, spi cant finish also cant get bandwith with sandra (suddenreboot) but everest still works!

any ideas? sometimes i can bench with the "fullstable" 2,5-3-3-6 settings but it crashes so often?! but why? maybe the memory controller could hold it when loading windows and all other programs etc...? dont know but woulsd be great stabilizing in windows!

seEn

best to start a new thread rather that drag my thread off topic

[babyelf]

any ideas when it'll arrive in aus eva?

[eva2000]

any ideas when it'll arrive in aus eva?

seems to have arrived in OZ now http://i4memory.com/showthread.php?p=3485#post3485

[graham_h]

We've got them in Australia now Here

[babyelf]

cool

thanks

didn't know u guys see this as well...

any discounts? :P

[chr]

i have two of these kits, and the results are similar; i have yet to burn them in, doing it as we speak. 260mhz @ 6-2-2-2 3.6v, 250mhz @ 5-2-2-2 3.4v.

[eva2000]

i have two of these kits, and the results are similar; i have yet to burn them in, doing it as we speak. 260mhz @ 6-2-2-2 3.6v, 250mhz @ 5-2-2-2 3.4v.

nice that's good to hear

[Richdog]

Wow looks like decent stuff. I've just had to RMA my OCZ PC3700 EB and i've asked for some of this in exchance with EB being a bit of a distant memory now. Looks like i'd better finally invest in a booster...

[Radelon]

I get about the same mhz as eva, but my timings are a lot tighter:

Well guys, I got my modules and let me say that I didn't have any problems at all.

Here's my config:
A64 3200+ Winny 441
DFI NF4 Ultra D
Powerstream 600w
etc.

Jumper on 4v and using 325 bios @ 520ddr:
TCL=1.5
TRC=7
TRFC=15
TRCD=2
TRRD=2
TRAS=4
TRP=2
TWR=2
TWTR=1
TRTW=2
TREF=3120

RW Queue Bypass=16x
Bypass Max=7x
Max Async Lat=7
Read Preamble=5

Also DQS Skew Decrease 0, DS Auto and 3. VDIMM 3.5v plus Enabled for the extra .5v. SuperPI is 31-32 at 10x260.

Nets about 3900 unbuffered Sandra, 7800 write Everest, 2900 read, 34.7 Latency

[babyelf]

anyone else have it?

currently bidding for a 3200LL bh-5 2x512.. if i don't get that one then i'll get this instead...

[quicksilverXP]

I've got it... having some lackluster results though... I'm trying different bioses right now.

[babyelf]

hmm just got my 3200LL 3205v1.1

i'll skip first :P

[quicksilverXP]

Hey.... I've got a problem... my OCZ BH-5 can run at 260 5-2-2-2 fine in Superpi and Prime, but with the Memtest 1.55, it fails on Test 5 instantly with many errors.... even at only 220 Mhz. Can someone help me out? I just tested before the whole NF4 problem with UTT type memory... do you think I messed up my OCZ BH-5s?

[Jack]

Hey.... I've got a problem... my OCZ BH-5 can run at 260 5-2-2-2 fine in Superpi and Prime, but with the Memtest 1.55, it fails on Test 5 instantly with many errors.... even at only 220 Mhz. Can someone help me out? I just tested before the whole NF4 problem with UTT type memory... do you think I messed up my OCZ BH-5s?

it could be a minor bios setting.
what mobo do you have?

[quicksilverXP]

DFI NF4 Ultra-D

[Minnyboy]

eva2000,
You tried the new bios OPB has posted??

Maybe give it a try (especially the 414-2 bios as the other 2 seem to be more for TCCD) & see if it helps any??

I'm gonna give the 414-2 a try with my 2 x 256MB XMS3500 & see if the bios helps any or if my rig is crying for me to get it a proper 24pin...

Good to see all those tests rather than just the cpu-z screenie...

Cheers,
Minnyboy

[eva2000]

Hey.... I've got a problem... my OCZ BH-5 can run at 260 5-2-2-2 fine in Superpi and Prime, but with the Memtest 1.55, it fails on Test 5 instantly with many errors.... even at only 220 Mhz. Can someone help me out? I just tested before the whole NF4 problem with UTT type memory... do you think I messed up my OCZ BH-5s?

fine is super pi 32m or just 1m ? what advance timings / bios settings and voltage you using ?

haven't tried the new bioses as yet

[Jack]

DFI NF4 Ultra-D

have you seen this guide?
maybe changing dram drive strength and Tref can help
i know it's for tccd, but you can always test it