Page 1 of 2 12 LastLast
Results 1 to 25 of 38

Thread: Dragon EVO 2.3

  1. 03-23-2007, 05:50 AM #1
    k|ngp|n
    k|ngp|n is offline
    :-)~
    Join Date
    Jun 2003
    Posts
    3,583

    Dragon EVO 2.3

    Back by demand...the new EVO 2.3. First units from a limited run should be shipping early next week. This design is slightly more refined with regards to overall capacity and temperature control with ln2. Same 2-piece cu/alu construction and mounting kit as previous EVO. Still at a great performance/price ratio .
    If you think you are interested in one PM me before hand, I bet they will be gone in a flash as 1/2 are already spoken for .











    EVO with some Tek's:
    Last edited by k|ngp|n; 03-24-2007 at 07:35 AM.
    Reply With Quote Reply With Quote
  2. 03-23-2007, 06:45 AM #2
    Vullf
    Vullf is offline
    Xtreme Member
    Join Date
    Jan 2007
    Posts
    116

    Dude, its awsome!
    Reply With Quote Reply With Quote
  3. 03-23-2007, 07:25 AM #3
    blind_ripper
    blind_ripper is offline
    Xtreme Addict
    Join Date
    Jan 2005
    Location
    belgium
    Posts
    1,735
    Send a message via MSN to blind_ripper
    nice going vince , are there big temps differents in drop under Big load ?
    Reply With Quote Reply With Quote
  4. 03-23-2007, 12:42 PM #4
    Brian y.
    Brian y. is offline
    -_-
    Join Date
    Sep 2006
    Location
    ATLanta, Ga.
    Posts
    516
    Send a message via MSN to Brian y.
    nice work!Was DICE results affected w/ the revision at all?
    Quote Originally Posted by Gautam View Post
    I'll add my name to this elpida graveyard as soon I even think about running 32M. (yes, the thought is enough)

    Reply With Quote Reply With Quote
  5. 03-23-2007, 12:52 PM #5
    Brettbeck
    Brettbeck is offline
    Xtreme Addict
    Join Date
    Jan 2006
    Location
    Sheffield, UK
    Posts
    1,288
    Send a message via MSN to Brettbeck
    Great job KP !
    Reply With Quote Reply With Quote
  6. 03-23-2007, 01:00 PM #6
    Stapler
    Stapler is offline
    Xtreme Member
    Join Date
    Jun 2006
    Posts
    428
    Nice pot KP, looks like you added more steps.
    Reply With Quote Reply With Quote
  7. 03-23-2007, 01:06 PM #7
    blind_ripper
    blind_ripper is offline
    Xtreme Addict
    Join Date
    Jan 2005
    Location
    belgium
    Posts
    1,735
    Send a message via MSN to blind_ripper
    Quote Originally Posted by White B View Post
    nice work!Was DICE results affected w/ the revision at all?
    if u want to dice u should get the 2.2rev off the dragon , as far as i know this i just one pure peace off copper for LNē .
    now im waiting for the F1 to show his head , can we pre-order vince ?
    Reply With Quote Reply With Quote
  8. 03-23-2007, 01:11 PM #8
    LittleDevil
    LittleDevil is offline
    -100c Club Member
    Join Date
    Dec 2004
    Location
    Europe
    Posts
    1,796
    Send a message via ICQ to LittleDevil Send a message via MSN to LittleDevil
    Really nice pot Vince

    regards
    ------------------------------------------------------------------------------------------------------------------------------------------------
    My Work: LittleDevil's SS Cases, LittleDevil's SS Worklog, LD CPU-R1 Dice/LNē Pots, LD GFX-R1 Dice/LNē Pots,
    LittleDevil LD PC-V10, LittleDevil's K-Type Temp Display, |EMAIL: ldphasechange@gmail.com

    LD PC-V8 Watercooling Cases:     LINK
    LD PC-V8 ATX/HPTX Watercoolig PC case with 10 expansion slots: LINK NEW!
    -------------------------------------------------------------------------------------------------------------
    www.ldcooling.com

    Find US on Facebook
    Reply With Quote Reply With Quote
  9. 03-23-2007, 04:23 PM #9
    Dekara
    Dekara is offline
    Xtreme Member
    Join Date
    Oct 2005
    Location
    Belgrade, Serbia
    Posts
    181
    Send a message via ICQ to Dekara Send a message via MSN to Dekara
    Pot looks great, nicely done.

    Congrats.
    Reply With Quote Reply With Quote
  10. 03-24-2007, 06:47 AM #10
    Soker
    Soker is offline
    Xtreme Member
    Join Date
    Dec 2005
    Posts
    102
    yeah, very very nice pipe
    Reply With Quote Reply With Quote
  11. 03-24-2007, 07:28 AM #11
    Tuppen^^
    Tuppen^^ is offline
    Xtreme Member
    Join Date
    Jan 2007
    Location
    Norway
    Posts
    165
    Nice..
    Reply With Quote Reply With Quote
  12. 03-24-2007, 07:55 AM #12
    PPInDaHouse
    PPInDaHouse is offline
    Xtreme Enthusiast
    Join Date
    Jan 2007
    Location
    Portugal
    Posts
    521
    Send a message via MSN to PPInDaHouse
    Very nice pots KP
    Reply With Quote Reply With Quote
  13. 03-24-2007, 11:38 AM #13
    Otternase
    Otternase is offline
    Xtreme Member
    Join Date
    Jan 2005
    Location
    Germany
    Posts
    292
    Great Work
    ..........still building Coolerīs...........
    Reply With Quote Reply With Quote
  14. 03-24-2007, 04:48 PM #14
    Dynasty
    Dynasty is offline
    Xtreme Addict
    Join Date
    Jun 2004
    Posts
    1,280
    great work on the pots K|NGP|N.......

    8800 ultra sli 06
    8800 gTx sli 03
    Reply With Quote Reply With Quote
  15. 03-24-2007, 07:02 PM #15
    sacha35
    sacha35 is offline
    Xtreme Enthusiast
    Join Date
    Oct 2006
    Location
    England
    Posts
    702
    awsome
    Reply With Quote Reply With Quote
  16. 03-25-2007, 07:32 AM #16
    lasse.j5
    lasse.j5 is offline
    Xtreme Cruncher
    Join Date
    Jan 2007
    Location
    Denmark
    Posts
    177
    That is one sexy looking pot!
    Watercool Project! (Check it out!) (New update: 25/07-2007: Pics of costom made RAM-cooler + lapjob)



    System:
    Intel Core 2 Duo E6420 @ 3600 MHz, 1.52 Vcore
    Asus P5K Deluxe
    Crucial Tenth Anniversary PC-5300 2 x 1024 Mb @ 900 MHz, 4-4-4-9, 2.05 Vdimm (Costom cooled)
    Inno3D 8800 GTS 640 Mb @ 648/1512/1021
    Corsair HX520W
    2 x WD Raptor 74 Gb (RAID0)
    Antec P180B (3 x Scythe S-FLEX SFF21E @ ~ 10 V)
    Samsung SyncMaster 226BW 22"
    Sunbeam Rheobus

    Watercooling:
    Swiftec Apogee GTX (Bowed)
    Swiftec MCW60 (Swiftec MC14 and MC21 ramsinks)
    Thermochill PA120.3 (3 x Shakoon Silent Eagle 2000 @ ~ 6.5 V)
    Laing DCC-2 18W (Aplhacool top)
    EK Multioption 150
    Masterkleer 7/16" ID
    EK High-Flow fittings
    Reply With Quote Reply With Quote
  17. 03-25-2007, 07:44 AM #17
    Misko
    Misko is offline
    Xtreme Enthusiast
    Join Date
    Sep 2005
    Location
    Belgrade, Serbia
    Posts
    594
    k|ngp|n can u post vs. performance with older dragon 2.2, or can u say what did u get with this design?

    Born to overclock
    Reply With Quote Reply With Quote
  18. 03-25-2007, 08:51 AM #18
    blind_ripper
    blind_ripper is offline
    Xtreme Addict
    Join Date
    Jan 2005
    Location
    belgium
    Posts
    1,735
    Send a message via MSN to blind_ripper
    he got beter controll over temps under LNē (controlled lnē) thats the change .
    maybe little bit beter temps
    Reply With Quote Reply With Quote
  19. 03-25-2007, 08:58 AM #19
    k|ngp|n
    k|ngp|n is offline
    :-)~
    Join Date
    Jun 2003
    Posts
    3,583

    hey

    Quote Originally Posted by Misko View Post
    k|ngp|n can u post vs. performance with older dragon 2.2, or can u say what did u get with this design?

    This design is not too radically different from previous Misko, the numbers are similar. But the base has changed a little to give the heat coming off of the chip a better "path" so to speak, giving the unit a little more accurate feel when using ln2. It is leaner than previous units, using less copper mass.
    Reply With Quote Reply With Quote
  20. 03-25-2007, 09:33 AM #20
    Tyrou
    Tyrou is offline
    Skulltrail Addict - XIP
    Join Date
    Nov 2004
    Location
    France
    Posts
    910
    Very nice pots Vince !
    LiveFromCeBIT '08: Pictures, Overclocking and XIP meeting

    Tyrou.net: all my pictures : overclocking, conventions, XS meetings, around the world, and much more...
    Reply With Quote Reply With Quote
  21. 03-25-2007, 09:47 AM #21
    SoF
    SoF is offline
    Xtremely Bad Overclocker
    Join Date
    Jan 2005
    Location
    East Blue
    Posts
    3,596
    wow that pot is one sweet hybrid - aaaaawesome

    @tyrou hey there
    Last edited by SoF; 03-25-2007 at 09:49 AM.
    | '12 IvyBridge - "ticks different"... | AwardFabrik IvyBridge round I by SoF | AwardFabrik IvyBridge round II by angoholic & stummerwinter
    | '11 The SandyBridge madness... | AwardFabrik / Team LDK OC-Season 2011/2012 Opening Event
    | '10 Gulftown LaunchDay OC round up @ASUS RIIE | 3DM05 2x GPU WR LIVE @Cebit 2010 @ASUS MIIIE | SandyBridge arrived @ASUS P8P67
    | '09 Foxconn Avenger | E8600 | Foxconn A79A-S | Phenom II 940 BE | LaunchDay Phenom II OC round up
    | '08 7.438s 1m LN2 | AMD 1m WR LN2 | 2nd AOCM | Phenom II teasing
    | '07 100% E2140 | 106.5% E2160 | 100% E4500 | 103% E4400 | 5508 MHZ E6850 | 7250 MHZ P4 641 126.5% by SoF and AwardFabrik Crew all on Gigabyte DS3P c? and LN2...
    | '06 3800+ X2 Manchester 0531TPEW noHS 3201MHZ c? | 3200+ Venice noHS 3279MHZ c? | Opteron 148 0536CABYE 3405MHZ c? all on Gigabyte K8NXP-SLI compressorcooled
    | '05 3500+[NC], 3000+[W], 2x 3200+[W], 3500+[NC], 3200+[V] 0516GPDW
    Quote Originally Posted by saaya
    sof pulled a fermi on all of us !!!
    Reply With Quote Reply With Quote
  22. 03-25-2007, 10:19 AM #22
    Jort
    Jort is offline
    Xtreme Addict -100C Club
    Join Date
    Jul 2004
    Location
    Mechelen(belgium)
    Posts
    1,652
    Quote Originally Posted by Tyrou View Post
    Very nice pots Vince !
    Steven they miss you at the top I know you got to little time atm
    Back in the phase change world
    Reply With Quote Reply With Quote
  23. 03-25-2007, 10:32 AM #23
    Misko
    Misko is offline
    Xtreme Enthusiast
    Join Date
    Sep 2005
    Location
    Belgrade, Serbia
    Posts
    594
    Quote Originally Posted by k|ngp|n View Post
    This design is not too radically different from previous Misko, the numbers are similar. But the base has changed a little to give the heat coming off of the chip a better "path" so to speak, giving the unit a little more accurate feel when using ln2. It is leaner than previous units, using less copper mass.
    I like new angle of scarp wall. This way less cold is going to mosfet and condensation problems should be reduced also. I suppose now u need more ln2 for same temp compared to previous dragon, but u can control it better.
    Born to overclock
    Reply With Quote Reply With Quote
  24. 03-25-2007, 11:35 AM #24
    DagoDuck
    DagoDuck is offline
    Xtreme Member
    Join Date
    Oct 2006
    Location
    B/EH, Germany
    Posts
    219
    You've done one of the best containers of the world, Vince. GZ!
    Reply With Quote Reply With Quote
  25. 03-25-2007, 01:08 PM #25
    lior307
    lior307 is offline
    Xtreme Member
    Join Date
    Aug 2004
    Posts
    416
    Send a message via AIM to lior307
    Quote Originally Posted by DagoDuck View Post
    You've done one of the best containers of the world, Vince. GZ!
    FOR IT'S SIZE - be sure it is THE BEST ONE IN THE WORLD.
    i7 920, HD4870X2
    Corsair 6GB 1800MHZ
    GigaByte X58 Xtreme,
    *************************
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules