My first go at sleeving, thanks for the guide!
My first go at sleeving, thanks for the guide!
HAHAHHA well the staple way to remove atx pins is definately easier, I thought i was so good at it i can just push and pull. SO I kept doing it all went well then all of a sudden, i pull the wire outta its pin. silly me.. Now I have to wait for PPCS to get back in stock with Female ATX Pins. Anywhere else I can buy???
Great guide btw
Frozencpu
http://www.frozencpu.com/products/17...tml?tl=g44c155
maybe moser, mcmasters
better yet, HERE and then scroll down to p/n: WMF-3917FT for 15 pins at $1.50 or p/n: 39-00-0039C-100PK for 100 pins at $7.95!
thx Jakethesnake011 and shazza
i might just get the hx850 and sleeve it, 2 accent sleeving to make it look pretty
Tcassius, I can't see the pictures. It requires us to log in first.
I recently got this little kit from SunbeamTech
Works great, but now I don't have a psu anymore to use it.
PC: Case: Zalman Z-Machine GT-1000 Black Brushed Alu - Screen: HP W2408H - Mobo: DFI Lanparty DK P45-T2RS PLUS - CPU: Intel C2Q Q9550 - Ram: Corsair Dominator 8GB PC2-8500 - GPU: MSI 460GTX OC 'Cyclone' - Sound: Asus Xonar D2X + Onkyo HT-S5105 5.1 set
Cooling Thermolab Baram + 2x tacens Ventus ice - Storage: OCZ Vertex 60GB, WD Caviar Black 1TB, WD Green 3TB - PSU: Corsair HX520 - Peripherals: Duck Orion TKL (MX Clears) + Roccat Kova mouse
@Herc130
Thanks buddy I just ordered some, Now I need to find the correct crimper...
red´n´white
sata meets 5.7mm sleeve
i think they like each other
Nice, white sleeving inside a translucent tube.
How did you do that? Just sleeve a regular audiocable and put a tube over it with a chrome bit at the end?
If so, where did you get it? The chrome bit I mean.
@TCassius: Still nothing.
I can see the forums, but only the links of the pictures. Why not host it at Imageshack or pict.com?
PC: Case: Zalman Z-Machine GT-1000 Black Brushed Alu - Screen: HP W2408H - Mobo: DFI Lanparty DK P45-T2RS PLUS - CPU: Intel C2Q Q9550 - Ram: Corsair Dominator 8GB PC2-8500 - GPU: MSI 460GTX OC 'Cyclone' - Sound: Asus Xonar D2X + Onkyo HT-S5105 5.1 set
Cooling Thermolab Baram + 2x tacens Ventus ice - Storage: OCZ Vertex 60GB, WD Caviar Black 1TB, WD Green 3TB - PSU: Corsair HX520 - Peripherals: Duck Orion TKL (MX Clears) + Roccat Kova mouse
It is a 3 pin fan lead, as i am playing with few ideas. As the stereo jack has 3 connecters it works well.
Hope that explains a bit more bout it
Holy , that's ing brilliant. I love this outside the box thinking!
bentleya, I love it!
Major props for creativity, Sir. I'm looking forward to seeing more on this concept.
Thanks for the kind words, next step is black sleeving, so just nee to wait for Sir Nils , also need to modify the fan side a little bit .
Dangal's Guide + Straw Method by WestCoastMods = WIN
SCHOOL PC
CPU = i7 920 D0
GPU = 2x GTX285 SLI
Mobo = Asus P6T X58
HDD = 3x 30GB Vertex SSD RAID0
RAM =3 x 2GB Dominators1600
CPU Block = Apogee GTZ
GPU Block = 2x HEATKILLERŽ GPU-X˛ GTX285
NB Block = Bits Power BLACK FREEZER///EK-Mosfet ASUS X58 KIT
Case = MM U2UFO
PSU = Corsair HX1000W
GAMING PC
CPU = I7 940
GPU = 2x GTX 295
Mobo = X58 Classified
HDD = 3x 30GB Gskill SSD RAID0
RAM =3x2GB Dominator GT
CPU Block = Heatkiller 3.0
GPU Block = Koolance VIDNX295
NB Block = EK Acetal Full Coverage
Case = SS TJ07
PSU = Corsair HX1000W
Bentley I love the idea of using stylish plugs instead of these darned molex configurations at least for fans if not other parts its wonderful
wow bentleya, this is really nice idea. Agree with Sniipe - your concept hundred times better than awful molex
btw, just imagine backpanel of fan controller that looks like hi-fi audio receiver with lots of slots for connectors - I'd love that Also it would be much easier to connect/disconnect
stereo plug mods have been around for a long time, never has gained in popularity because of the amount of work+costs entailed.
Check these out for examples orac3 + der meister
good job benty!
They say the definition of madness is doing the same thing and expecting a different result.
Howlin' Pelle Almqvist
Project Log Completed: all internal v1000
Does anyone know where to get 1/8 heatshrink and 1/8 sleeving in canada? i would hate to bring it across border and get dinged with charges.. thanks!
Project: HeadShot
Intel i7 3770k | Corsair H100
EVGA GTX-590 Classified | XSPC GTX 590 Waterblock
Gigabyte G1.Sniper 2 MotherBoard | Swiftech MCR-320 Res/Rad/Pump
16GB Corsair Vengeance Low Profile Ram
Crucial M4 128GB / Intel X25-M 160GB / WD 1TB Black
Corsair AX850W PSU
27" Apple Cinema Display (2560x1440)
Corsair 600t White
Picture
You best be Crunching and Folding/GPUgrid'ing!
perhaps from a well known auction site ?
[SIGPIC][/SIGPIC]
Hey All,
I was wondering - How much would someone in the UK charge to sleave me 3x 120mm fans in a row? (so they come all off one fan header - Dont worry though, I am going to be using a molex > fan header cable :p)
I cant briad for shnit
you're unlikely to get dinged by performance PCs if you get it shipped USPS
Current System:
eVGA 680i SLi "A2" P30 BIOS
intel Core 2 Quad Q6600 (currently at stock)
OCZ ReaperX 4GB DDR2 1000 (running at DDR2 800 Speeds with cas4)
320GB Seagate 7200.10
XFX 8800GT XXX 512MB (stock clocks)
auzentech X-Fi Prelude
PC Power and Cooling Silencer 750 Quad Copper
Win XP Pro
Yes, correct it has been done a few times, i have done it already on a project back in beginning of 2007. But This time, its changing a bit, making the idea more common.
Bookmarks