So...like the thread is called,this is my first mod and.I decided to start moddin' my case one day when i was cleaning it and from there i had gone wild
I am sorry for the lack of pics in the modding stage but i fried my mobo and gpu card adn i am running with a Celeron478 until i will buy new parts .Anyway i hope u will like it,i know i sure do,being my first
This is what i used for this mod :
1 angle grinder
2 half meter mesh from a hardware store
3 drill
4 an old psu case for the hdd rack
5 4 wheels
This is how the case looked before
And this is what i did during the mod(once again i am sorry i haven't got any more pics of this stage)
This is when i made the right side panel...after i had cut the original panel
And this is the left side already assembled
And this is the front of the case after i have cut it and left only the sides so that i could put the mesh!
This is when i painted the case black
This is the hdd rack i made from the psu case.it has that 80mm fan for hdd cooling and i also made that side between the fan and the left side so the hdd can stay there
Also i cut a hole on the top of the case for a 120 mm fan,and there is also another 120mm fan in the front that i cut
And this is the case finished...during asembling
And this is the case assembled.the only things i still need are 2 80mm fans to put in the back and 2 buttons(start and reset.For now it has only a start button)
so this was my first mod.i hope u like it.The only thing i dislike about it is the paint that does not last .
Anyway i like it...and hope u will to
Thx!!!
Bookmarks