Looking for a V-Dimm and more importantly Vcore Mod to push my two new 275 HE's recently purchased from FreeCableGuy to there limits and perhaps Beyond :P.
if anyone knows or could find one be most greatfull.
Thanks
Looking for a V-Dimm and more importantly Vcore Mod to push my two new 275 HE's recently purchased from FreeCableGuy to there limits and perhaps Beyond :P.
if anyone knows or could find one be most greatfull.
Thanks
Could you post some high res pictures of the socket area en dimm slot area?
Epox 9NPA+ Ultra - Opteron 146 0530 APMW
Infineon BH-6 2x256mb - Tagan 480W-U22
Gainward 6600GT Vmodded - Kingston HyperX BH-5 2x256mb
Infineon BH-6 280MHz 2-2-2-5 @ 3,77V - 3602MHz - PhCh mem Project
Hey nightmare,
Im going to try and obtain some, unfortunatly i dont have a digitcal camera capable of taking the types of pictures you would require to identify compoenents and possible modifcations.
Il post back if/when i get some.
Thanks very much
You are going to need to know what chip is under the CoreCell heatsink. I am betting its a Winbond chip.
All we really need to know is the orientation of the chip, where pin 1 is. I have worked on boards with that heatsink on it, and I am betting its one of 2 chips. The mod shouldnt be all that difficult once we figure out whats what.
I will look on my backup drive for the data sheets for the chips that I think it is. More than likely Pin 1 is on the top left handside of that chip. Sometimes they mark the motherboard PCB to indicate where Pin 1 is suppose to be. Look for a small "1", an Arrow, or a Triangle around that chip.
I like my women the way I like my processors...naked.
I am not the HellFire that writes bios files. I work strictly on voltage modifications.
Anything new here?
If still needed i could take some shots with my digicam this afternoon at a friend's.
DFI Lanparty Ultra-D - A64 3200+ - 6800NU - 2x512MB A-Data DDR566 - 2x160GB Hitachi S-ATA
That's one slick looking board. It'll be pwn when you get some vmods done
Good luck
Nick
Core i3-550 Clarkdale @ 4.2GHz, 1.36v (Corsair A50 HS/F) LinX Stable
MSI H55-GD65 Motherboard
G.Skill 4GBRL DDR3-1600 @ 1755, CL9, 1.55v
Sapphire Radeon 5750 1GB
Samsung F4 320GB - WD Green 1TB
Xigmatek Utgard Case - Corsair VX550
Hey guys, i do apoligise for not replying sooner.
Iv managed to get myself a digicam finally
YEY!
The board is hard at work running rosetta atm, i wont have time to rebuild untill the weekend, so i will definatly get a shot of the board up at the weekend, il be extra vigilant of the Core Cell chip
Thanks Guys
**UPDATE**
Pictures added.
MSI core cell with the Heatsink off
and an Ovewview of the motherboard, if anyone needs any more pcitures just let me know.
Core Cell
Overview
Thanks
Last edited by Smurfy; 04-29-2006 at 06:58 AM.
Do you know where on the board to read Vdimm with a DMM?
Looks like MSI remarked that chip. Once I get home from school I can look over the datasheets I have for the main Winbond chips that are the package style of your onboard chip.
I like my women the way I like my processors...naked.
I am not the HellFire that writes bios files. I work strictly on voltage modifications.
Im afraid i do not have the faintest idea where to read Vdimm
Il have a think about it.
Atm im thinking a Vdimm mod probebly isnt nesersary as research has shown the memory im using doesnt respond well to voltage increases above 2.85 and i can already obtain that.
mainly intrested in Vcore mod despite the topic saying Vdimm :P
Posting Permissions
Reply With Quote
Bookmarks