2006 x2 3800 Manchesters

**stone_cold_Jimi** · 03-17-2006, 01:32 AM

Are mostly gorgeous. Let's make that official.

I can't believe how good. My LDBFE 0607 has been dual SP2004 behind me for the last hour and a bit, I can open other apps, fool around, it doesn't miss a beat. At 2600 MHz, 1.328v core, 38C on a heatpipe stock HSF.

With thanks and respect to ooztuncer for spreadsheet format, the list:

**Kesnel** · 03-17-2006, 01:40 AM

They certainly are clocking well.

Could you point me to your source on the 0605 LDBHE chips please? I have one myself, which I've yet to test, but I've seen only one other. I'd love to see a few results for this week before I test it myself.

**stone_cold_Jimi** · 03-17-2006, 02:03 AM

Hah, careless reading by me - LDBHE 0601 is the excellent one. Kesnel, can't wait to see what your LDBHE 0605 does tbh, it might well be kicking if the trend holds.

**NightCrawler™** · 03-17-2006, 03:23 AM

I've installed a LDBHE 0606 in a friends computer last week... haven't had a chance to play with it but if it's going to beat my 4400 with ease I'm going to be pissed.. LOL
Well at least I have double the amount of L2 cache for almost double the amount of $$...

**MikalCarbine** · 03-17-2006, 05:33 AM

Jimi, where did you buys these, and when?

**stone_cold_Jimi** · 03-17-2006, 05:49 AM

I'm in the UK, Mikal, got the 0607 from overclock.co.uk yesterday. Let's see what comes next week.

**MikalCarbine** · 03-17-2006, 07:19 AM

Damn you bastards in the UK getting sweet steppings

**JasonGTP** · 03-17-2006, 09:50 AM

i have this..
ADA3800DAA5BV
LDBHE 0601TPMW

i got from new egg a few weeks ago.. i know it will do at least 2500 on stock volts.. but my MB is a pain in the ass. i get cold boot issues when i set my htt high.. sometimes takes 4-5 resets to get it to fully post with 250htt.. how annoying.

so i run at stock for now

anyone have my same stepping?? post results!

**lawrywild** · 03-17-2006, 10:01 AM

Originally Posted by MikalCarbine

Damn you bastards in the UK getting sweet steppings

LOL but we pay more

here's my baby, came today

chew* · 03-17-2006, 10:44 AM

Mines an xpmw..........3.5 on DI and more left in it.

**lemonlime** · 03-17-2006, 10:50 AM

Any of these new steppings doing well on phase?

chew* · 03-17-2006, 10:53 AM

I know mine does well at -56 core temps

**stone_cold_Jimi** · 03-17-2006, 11:07 AM

Originally Posted by lemonlime

Any of these new steppings doing well on phase?

I'm going to find that out this weekend.

I'm still on stock HSF, the Ballistix (which I've never bothered tuning on the Expert) are forcing me to attend to them. Came home earlier to find dual SP2004 running at 9+ hours @ 2600 / 1.328v. Going to 2700 has shown up the RAM's discomfort again, so memtest is the focus at the moment.

There again, under phase it'd have G.Skill HZ, so why don't I just whack it in a.s.a.p.?

chew* · 03-17-2006, 11:10 AM

thats what i like to hear. Freeze that bad boy.

**RLM** · 03-17-2006, 12:12 PM

I don't know what's going on with mine I have LDBHE 0602XPCW and LDBFE 0607TPMW. Over 2.6GHZ I have to really start sticking the volts in to get any higher. On the ldbhe I have to stick in about 1.45 to get 2.7ghz.

Not sure what the score is there. Maybe ram related? Maybe Luck?

RLM

**Learn** · 03-17-2006, 12:32 PM

i've got an LDBHE 0605 FPMW, max clock speed in sig

**Joe Camel** · 03-17-2006, 12:47 PM

3800 (LDBHE 0601 UPMW)
(from tankguys)

IHS:

http://img389.imageshack.us/img389/5650/pict04185dx.jpg

MachII (stock)

3D benchable into 3.3GHz (1.6V)

http://service.futuremark.com/compare?3dm06=185592
(x1900XTX with ViperJohn's VV-II (245w TEC) WB)

**ReD.SkY** · 03-17-2006, 12:53 PM

wait a sec, which stepping is best for a 3800?

**stone_cold_Jimi** · 03-17-2006, 12:59 PM

Originally Posted by Red.Sky

wait a sec, which stepping is best for a 3800?

E4, Manchester. See thread title if in doubt lol.

**stone_cold_Jimi** · 03-17-2006, 03:59 PM

Originally Posted by chew*

thats what i like to hear. Freeze that bad boy.

More of a delicate petal. Frozen, finding a stable vcore is a biatch. I'm trying 1.28v at 2600, it has been interesting getting here. It's an "N" chip. It doesn't know if it wants less or much less. More tomorrow, I'm for bed.

**lawrywild** · 03-17-2006, 04:03 PM

Originally Posted by Mike6969

XPMW's are always the best steppings,,, i'd say easily 3ghz at 1.55v.

I dam hope so

**stone_cold_Jimi** · 03-18-2006, 02:24 AM

Meh, meh and meh again.

The BF mem controller is as cold-bugged as a BW. No boot of any sort beyond 295 HTT. Still doesn't want any volts, I've just booted 280x10 at 1.296v, core temp -34C, evap -52C. It may be possible to get 290 stable, but is it really worth it? Looks like this one's for water, the 4600 is going back under cold today.

Sorry guys!

**Kesnel** · 03-18-2006, 02:52 AM

Originally Posted by Learn

i've got an LDBHE 0605 FPMW, max clock speed in sig

What voltage does it take for that clock? What is the max benchable? It's on chilled water I take it.

Any info you could give me would be great.

**Babbsack** · 03-18-2006, 03:02 AM

I got my new Manchester 0601 TPDW last week.

It clocks @ 1,39v up to 2900 MHz

**stone_cold_Jimi** · 03-18-2006, 04:32 AM

I TAKE IT ALL BACK!

Booted 300x10 @ 1.392v, -34C core -51C evap. What did it want? VOLTS.

It's so pissy about fractions of a volt either way, up to about 2800. Then it says "feed me".

Thread: 2006 x2 3800 Manchesters

Thread Tools

Search Thread

Rate This Thread

Display

2006 x2 3800 Manchesters

Bookmarks

Bookmarks

Posting Permissions