as title says. jus curious where these modules are topping out in terms of vDimm.
Eg, at what voltage level are they reaching their max overclock... give or take 1mhz
[EDIT]
Please mention which CPU/Board you are using too
as title says. jus curious where these modules are topping out in terms of vDimm.
Eg, at what voltage level are they reaching their max overclock... give or take 1mhz
[EDIT]
Please mention which CPU/Board you are using too
Last edited by Rabbi_NZ; 12-21-2004 at 02:25 PM.
VX/UTT Voltage Scaling, please contribute...
10x260 _ 1T-2-2-2-8-7-15 _ 3.3vDIMM _ 1.75vCORE
Mobile 3400+ CG 0437XDPW
DFI LanParty UT
XP120 w/ 120mm Thermaltake Thunderblade
2x512MB OCZ VX
BBATI 9800np w/Infineon
PC Power & Cooling 510w Deluxe
I think that they scale linearly with the voltage just like BH-x chips. Maybe 4 volt?
C2D E6300 @ 3.5ghz | 2x1GB ADATA "Micron D9" @ 500 4-4-4-12 2.3v | Asus P5B-E Plus C2 | Sapphire X1900XT 512MB | Tuniq Tower 120
Whoops. I voted 3.5v not reading the whole thing. I stopped my testing @ 3.5 volt but it was scaling fine till than.
if you dont have personal experience please dont speculate... i want real results.
jinu117, thanks... i take your vote as "3.5v or higher"
VX/UTT Voltage Scaling, please contribute...
10x260 _ 1T-2-2-2-8-7-15 _ 3.3vDIMM _ 1.75vCORE
Mobile 3400+ CG 0437XDPW
DFI LanParty UT
XP120 w/ 120mm Thermaltake Thunderblade
2x512MB OCZ VX
BBATI 9800np w/Infineon
PC Power & Cooling 510w Deluxe
Edited 1st Post, please mention which CPU/Board you were using too
VX/UTT Voltage Scaling, please contribute...
10x260 _ 1T-2-2-2-8-7-15 _ 3.3vDIMM _ 1.75vCORE
Mobile 3400+ CG 0437XDPW
DFI LanParty UT
XP120 w/ 120mm Thermaltake Thunderblade
2x512MB OCZ VX
BBATI 9800np w/Infineon
PC Power & Cooling 510w Deluxe
I've reached 2-2-2-5 1T HTT 262 at 3.6V
MSI K8N Neo2 Platinum Edition (1.36 Beta Bios)
AMD 939 Winchester 3000+
The system is in my sig. I used to push 3.51VDIMM, but now I can get away with 3.40VDIMM.
2.8C
Asus P4C800-E rev2.0 1019 bios
2x 512MB OCZ PC3200 VX
Gecube 9800Pro Extreme R350
OCZ DDR Booster rev2
550W Antec Truecontrol
before burn in
228mhz 2-2-2-6 at 3.5v
233mhz 3-2-2-6 at 3.5-3.6v no higher regardless of vdimm
after burn in
240mhz 3-2-2-8 at 3.6v
working on 250mhz 3-2-2-8 at 3.6-3.7v now
not bad for ram optimised for AMD64
---
Thanks to everyone for posting... by the looks bout 50% of experiences show this RAM jus keeps on scaling past 3.6v, that's great news!
Please vote if you haven't yet
VX/UTT Voltage Scaling, please contribute...
10x260 _ 1T-2-2-2-8-7-15 _ 3.3vDIMM _ 1.75vCORE
Mobile 3400+ CG 0437XDPW
DFI LanParty UT
XP120 w/ 120mm Thermaltake Thunderblade
2x512MB OCZ VX
BBATI 9800np w/Infineon
PC Power & Cooling 510w Deluxe
Originally Posted by _Eduard_
BH-X and CH-X and any other chip doesnt scale linearly...
Bookmarks