Ivy Bridge i5 3570K/i7 3770K batch and o/c results

[OC Nub]

Chip came today. Batch#L206A973.

Testing now, will post some screens later. May have gotten a crap IMC, having trouble booting at 2600mhz, 2400 is pretty easy (which it should be).

[NoGuru]

Sergio! What's up bro, been a while. Good luck with the flash.

[andressergio]

Sergio! What's up bro, been a while. Good luck with the flash.

hey bro !!! back to OC ?

i will see as i did flash with ROG (the usb at the back) and same thing dont work

[andressergio]

Chip came today. Batch#L206A973.

Testing now, will post some screens later. May have gotten a crap IMC, having trouble booting at 2600mhz, 2400 is pretty easy (which it should be).

hope its just a setting mate !!! best of lucks

[Swiftdeathz]

Here is my current OC while folding@home. It was suggested to me in another forum I should be able to push more if I enable LLC 2 and perhaps 1.9v to the PLL volts?



Uploaded with ImageShack.us

[NoGuru]

hey bro !!! back to OC ?

i will see as i did flash with ROG (the usb at the back) and same thing dont work

I never really left, just slowed down due to new career and school and benched on AMD for awhile because Intel wouldn't scale with cold.

[andressergio]

I never really left, just slowed down due to new career and school and benched on AMD for awhile because Intel wouldn't scale with cold.

hope i see u on msn soon

AMD ouch ! lol

cheers !
Sergio

[OC Nub]

It was settings, 2800 bootable, just need a good kit to play with now.

[andressergio]

It was settings, 2800 bootable, just need a good kit to play with now.

a no no no that i want it lol

congrats !!!

[OC Nub]

^Thanks!

Here is my current OC while folding@home. It was suggested to me in another forum I should be able to push more if I enable LLC 2 and perhaps 1.9v to the PLL volts?

I wouldnt use 1.9v CPU PLL, you can lower it to 1.6-1.7 if the board allows.

[OC Nub]

Here's my first stable settings right off the bat first try, need to get memory tweaked in at 2133, was just trying for cpu stability on a 11.5 hour prime run. These setting get me 55c in BF3 which is a HUGE difference. Also after a day like this it seems all power saving features are enabled and 1600mhz idle @ .924v to 4.5ghz @ 1.2v works flawlessly.

Nice low vcore 24/7!

[shmaa]

3570K batch# 3208C060

1.253V under load on NH-D14. Ambient temp ~23C. Load temps got up to 90C on the hottest core using RealTemp

[LagunaX]

Ok guys some old school vintage P67 action!

3770k L206B314 P95 x64 stability testing on an Asus P8P67 Vanilla Bios 3207, air-cooled on a Venomous-X with 2x Enermax Magma 120mm fans:

4.7ghz @ 1.328v: ouch, kinda getting a little too toasty so stopped after 30min:

http://i246.photobucket.com/albums/g...0kp6747ghz.jpg

4.6ghz @ 1.276v after 1 hr: idles at .96v and 1600mhz - not too hot and not too slow - this is going to be my Goldilocks setting

http://i246.photobucket.com/albums/g...0kp6746ghz.jpg

[Rattle]

Nice low vcore 24/7!

thanks buddy, going to work on it more this weekend, these low vid sammy's do ddr3 2000 9-9-9-24 1t @ 1.5v so that's where I am at now with 4.5 @ 1.2v.

Sick clocks as usual BTW ddr3 2800 insane ! keep it up

[Martin.v.r]

ned help whit 46x108
it restarts my gfx driver all the time in 2d,is there a voltset I can put in.to order to stop it
to oc nub

wprime

[PatRaceTin]

I see many voltage & temp jump at 4.8 or above for IVY

[bro20000]

Gotta admit have been quite impressed with ivybridge. Just bought a 3770K with a Gigabyte GA-Z77X-D3H and am currently running 3.8Ghz with 0.988v stable using stock heatsink. I will start pushing it when my new w/Block comes.

[bro20000]

4.0Ghz 1.055Vcore on stock heatsink Batch3213B440

[zoob]

I'm thinking it might be my motherboard holding me back.

i7 3770K L206B351
ASUS P8P67 Deluxe BIOS 3207
2 x 4GB Samsung HCH9 @ DDR3-2200 9-10-10-28-1T 1.55V
Noctua NH-D14 stock fans @ 5V

43x100 @ 1.176V (offset of -0.010V) in BIOS, LLC on Ultra High, everything else on auto
44x and higher result in a BSOD unless I push 1.275V+

Stability with the RAM overclock, as well as the lower power draw is what drew me to Ivy.
I have a P8Z77-V Pro on order that will hopefully work more nicely with the chip.

[E-CRUSH]

3570K #L202B743
in my attemp to figure my best bclk (so far it settled @102-104mhz)
3.977ghz @1.064v
hsf : NH-D14 (default fan on hot tropical summer w/o ac too )



[spoiler]

[/spoiler]
i am still trying to enter "4.5 club" w/ vcc (around) 1.1v and still... haven't got any luck i wish i had more time and (luck too)

btw, i wonder if i using wrong version of ibt?? why it got "low'" speed output ~58gflops

yesterday i belive i have d/l the latest ver (v2.53)... can anybody enlighten me.

[-JJ-]

Batch# L209C112






MOBO: ASUS MAXIMUS GENE V
CPU: i5-3570K @4,7ghz (1,25 vcore) (cooled by Thermalright Ultra 120 Extreme)
RAM: Corsair Dominator GT DDR3 (2x2GB) @2200Mhz (8-8-6)
SSD: OCZ Vertex 3 120 GB
VGA: Gigabyte GTX 680
PSU: Zalman ZM850-HP

[zoob]

i7 3770K L206B351
ASUS P8Z77-V Pro 0906
2 x 4GB Samsung HCH9 @ DDR3-2133 9-10-10-28-1T 1.55V
Thermalright HR-02 Macho

45x100 @ offset of +0.005V (or whatever is the lowest setting is) in BIOS, CPU PLL @ 1.6V, LLC on Ultra High, everything else on auto

The NH-D14 doesn't mount with as much pressure as the HR-02 it seems. Also, setting Internal PLL overvolt helps immensely with Ivy clocking, whereas I never needed it on my SB 2600K and 2700K even up to 48x multi.

[NoGuru]

5.7 DICE http://valid.canardpc.com/show_oc.php?id=2359651

[andressergio]

5.7 DICE http://valid.canardpc.com/show_oc.php?id=2359651

grats friend !!!

[Bertross]

these memory speeds on the IVY are crazy!