It really is crying out for a heatpipe between the blocks.
If you decide to watercool the RAM as well, tube routing could be a nightmare unless of course using the new swiftech rad
PROJECT :: The Xtreme (WET) Dream!!!
PERSONAL H2O BESTS :
E8600 @ 4.8GHz E6750 @ 4GHz QX9650 @ 4.6GHz i7 920 @ 4.6GHz
PERSONAL AIR BESTS :
Sempron140 @ 4Ghz (Stock Cooler) i7 3960x @ 5.4ghz (Air Cooler)
Bex : "Who said girls can't play PC games or overclock!? Do I look like your imagination!?"
Aaron : "TBH, a girl doing all that is a pretty perfect girl!"
Swift_Wraith : "could someone please check bex for a penis?"
I'd like copper looks more too .. if there were no need to clean/polish copper after some time to keep those looks. Me being lazy nickel looks better in my eyes on that account.
Koolance blocks appeared : http://www.koolance.com/water-coolin...roduct_id=1227
PROJECT :: The Xtreme (WET) Dream!!!
PERSONAL H2O BESTS :
E8600 @ 4.8GHz E6750 @ 4GHz QX9650 @ 4.6GHz i7 920 @ 4.6GHz
PERSONAL AIR BESTS :
Sempron140 @ 4Ghz (Stock Cooler) i7 3960x @ 5.4ghz (Air Cooler)
Bex : "Who said girls can't play PC games or overclock!? Do I look like your imagination!?"
Aaron : "TBH, a girl doing all that is a pretty perfect girl!"
Swift_Wraith : "could someone please check bex for a penis?"
and again: is there _REAL_ need to put block on 7w chip???
PROJECT :: The Xtreme (WET) Dream!!!
PERSONAL H2O BESTS :
E8600 @ 4.8GHz E6750 @ 4GHz QX9650 @ 4.6GHz i7 920 @ 4.6GHz
PERSONAL AIR BESTS :
Sempron140 @ 4Ghz (Stock Cooler) i7 3960x @ 5.4ghz (Air Cooler)
Bex : "Who said girls can't play PC games or overclock!? Do I look like your imagination!?"
Aaron : "TBH, a girl doing all that is a pretty perfect girl!"
Swift_Wraith : "could someone please check bex for a penis?"
I think it looks great
"Lurking" Since 1977
Jesus Saves, God Backs-Up *I come to the news section to ban people, not read complaints.*-[XC]GomelerDon't believe Squish, his hardware does control him!
-Project Sakura-
Intel i7 860 @ 4.0Ghz, Asus Maximus III Formula, 8GB G-Skill Ripjaws X F3 (@ 1600Mhz), 2x GTX 295 Quad SLI
2x 120GB OCZ Vertex 2 RAID 0, OCZ ZX 1000W, NZXT Phantom (Pink), Dell SX2210T Touch Screen, Windows 8.1 Pro
Koolance RP-401X2 1.1 (w/ Swiftech MCP35X), XSPC EX420, XSPC X-Flow 240, DT Sniper, EK-FC 295s (w/ RAM Blocks), Enzotech M3F Mosfet+NB/SB
so what next? WB for onboard audio and lan???No need for me to H20 my Ram but I still do
maybe I'm not xtreme enough
-Project Sakura-
Intel i7 860 @ 4.0Ghz, Asus Maximus III Formula, 8GB G-Skill Ripjaws X F3 (@ 1600Mhz), 2x GTX 295 Quad SLI
2x 120GB OCZ Vertex 2 RAID 0, OCZ ZX 1000W, NZXT Phantom (Pink), Dell SX2210T Touch Screen, Windows 8.1 Pro
Koolance RP-401X2 1.1 (w/ Swiftech MCP35X), XSPC EX420, XSPC X-Flow 240, DT Sniper, EK-FC 295s (w/ RAM Blocks), Enzotech M3F Mosfet+NB/SB
I believe NaeKuh cooled his RAID card once
“Little expense had been spared to create the impression that no expense had been spared.” - Hitchhiker's GuideMondays:It's better to ask dumb questions now, than to look stupid later
Indeed he did. Any how, blocks... What I did wonder is why there's no block for the other cooler on the board?
I got my board last night and looking at it, those blocks on cover the top and bottom coolers... what about the cooler on the left hand side next to the device ports?
PROJECT :: The Xtreme (WET) Dream!!!
PERSONAL H2O BESTS :
E8600 @ 4.8GHz E6750 @ 4GHz QX9650 @ 4.6GHz i7 920 @ 4.6GHz
PERSONAL AIR BESTS :
Sempron140 @ 4Ghz (Stock Cooler) i7 3960x @ 5.4ghz (Air Cooler)
Bex : "Who said girls can't play PC games or overclock!? Do I look like your imagination!?"
Aaron : "TBH, a girl doing all that is a pretty perfect girl!"
Swift_Wraith : "could someone please check bex for a penis?"
2RCG_Bex
that part of stock cooler didn't contact with any components (just as the part between cpu and pci-e slots)
No no, not that bit. The bit on the left.
There's a cooler above the CPU (which there's a block) and a cooler on the southbridge with a fake bit underneath the CPU (which there's a block). But there's also another cooler to the left of the CPU? I've not had a full look at it but I thought it was making contact with something???
EDIT - Pictures explain better...
PROJECT :: The Xtreme (WET) Dream!!!
PERSONAL H2O BESTS :
E8600 @ 4.8GHz E6750 @ 4GHz QX9650 @ 4.6GHz i7 920 @ 4.6GHz
PERSONAL AIR BESTS :
Sempron140 @ 4Ghz (Stock Cooler) i7 3960x @ 5.4ghz (Air Cooler)
Bex : "Who said girls can't play PC games or overclock!? Do I look like your imagination!?"
Aaron : "TBH, a girl doing all that is a pretty perfect girl!"
Swift_Wraith : "could someone please check bex for a penis?"
Bex i think u missed out the other thread Mr Koolance had explained it:
We've had some questions on the other stock heat sink near the I/O ports, but that area doesn't make contact with any components. It's strictly for the heat pipe, so there's no 3rd block necessary. Materials are copper, brass, acetal, & nickel plating. Finishing on the top nozzle area is a little swirly IMO, but it will be better in the next batch.
SUCCESSFUL TRADE LIST RM600k+
^^ Malaysia's Overclocking Enthusiast Community Website ^^
Find us at Facebook HERE
XS Successful Trades:
G.Skill RipjawsZ 2400C9 4X4GB - sold to easegantini | G.Skill RipjawsX 2133C8 2X2GB - bought from Dumo | 2600K 57X - bought from newhit | 3770K 6750 - bought from Viss | 3770K 6750 - sold to Sniper | 3770K IMC 2800+ - bought from Dumo | G.Skill Pi 2200C7 - bought from websmile | 3770K IMC 2933+ - bought from Viss | DomGT 2kC7 3X2GB - sold to _AntLionBR_ | G.Skill Pi 2133C8 - bought from websmile | DomP 2800C11 - bought from Alex-Ro | Pi 2000C7 - bought from websmile | GTX4 + KVR 1333C9 - bought from TaPaKaH
Oh... I did miss that... sorry *n00b*
Need moar sleeps....
PROJECT :: The Xtreme (WET) Dream!!!
PERSONAL H2O BESTS :
E8600 @ 4.8GHz E6750 @ 4GHz QX9650 @ 4.6GHz i7 920 @ 4.6GHz
PERSONAL AIR BESTS :
Sempron140 @ 4Ghz (Stock Cooler) i7 3960x @ 5.4ghz (Air Cooler)
Bex : "Who said girls can't play PC games or overclock!? Do I look like your imagination!?"
Aaron : "TBH, a girl doing all that is a pretty perfect girl!"
Swift_Wraith : "could someone please check bex for a penis?"
Please note this water block (EK-FB KIT RE4) cools exactly as much heat generating components as ASUS factory cooling solution. Stock cooler doesn't have contact with nothing below the CPU socket and left of the RAM slots.
P.S.: Up for pre-order!
- EK-FB KIT RE4 - Acetal+EN (Nickel): http://www.ekwaterblocks.com/shop/ek...en-nickel.html
- EK-FB KIT RE4 - EN (Nickel): http://www.ekwaterblocks.com/shop/ek...en-nickel.html
- EK-FB KIT RE4: http://www.ekwaterblocks.com/shop/ek-fb-kit-re4.html
- EK-FB KIT RE4 - Acetal: http://www.ekwaterblocks.com/shop/ek...e4-acetal.html
Installation manual:
http://www.ekwaterblocks.com/shop/EK...1109820698.pdf
EK Water Blocks R&D
ekwb.com
Hobby: Rotary SS bench unit (LPG/R-507) | -75°C Auto-cascade (R-600/R-290/R-744) | Plate HX water chiller (1kW cooling power) | My 2nd cascade MP14FB R-507/R-1150 | Mini cascade R-507/R-1150 | GPU single-stage | Mach I restoration mod -> -38°C @ 230W
Milestones: 7.12GHz P4 | 6.84GHz K10.5 | 6.45GHz Ci5 | 3.31GHz K7
3DMark2001SE -> Favourite Game!
I've liquid cooled a raid card before, so have several people. That actually serves a purpose. A raid card does get hot, it's not like memory or say the intel SBs from prior chipsets that never got all that hot. Plus when you are stacking up all your PCIE slots it can get starved for air. Memory on the other hand.....
AMD Phenom II BE, ASUS Crosshair II formula, 8gb ddr2 800, 470 SLI, PC P&C 750, arcera RAID, 4x OCZ Vertex2, 2x samsung 7200 1tb, HT Omega Clario +
do you know how rediculously hot the Intel IOP 348 gets on a ARC-1680ix??
GOOD LORD!! u think the 480GTX's are furnaces??
Nice blocks eddy, i love how you guys did that top one with style...
I hate the board layout... it messes everything up, and its some sick person at intel wanting to change the style of the boards so it looks NOTHING like AMD. :\
Who really needs 8 ram slots??? 4 slots is fine with 4 gigs of ram each.. thats 16GBs itself of ram on a gaming PC.... NOT A SERVER PLATFORM mind you....
Last edited by NaeKuh; 11-30-2011 at 01:54 PM.
Nadeshiko: i7 990 12GB DDR3 eVGA Classified *In Testing... Jealous? *
Miyuki: W3580 6GB DDR3 P6T-Dlx
Lind: Dual Gainestown 3.07
Sammy: Dual Yonah Sossoman cheerleader. *Sammy-> Lind.*
Its my fault.. and no im not sorry about it either.[12:37] skinnee: quit helping me procrastinate block reviews, you asshat. :p
[12:38] Naekuh: i love watching u get the firing squad on XS
It's not the number of DIMMs, it's memory controller and CPU packaging which is to blame. In order to keep the trace lenght to a minimum they needed to place half of the IMC pins to the pinout on the left and the other half inverted to the pins on the right. This is logicaly the best solution which allows all DIMMs to have more or less equally long traces. It's all about the latency and signal loss.
EK Water Blocks R&D
ekwb.com
Hobby: Rotary SS bench unit (LPG/R-507) | -75°C Auto-cascade (R-600/R-290/R-744) | Plate HX water chiller (1kW cooling power) | My 2nd cascade MP14FB R-507/R-1150 | Mini cascade R-507/R-1150 | GPU single-stage | Mach I restoration mod -> -38°C @ 230W
Milestones: 7.12GHz P4 | 6.84GHz K10.5 | 6.45GHz Ci5 | 3.31GHz K7
3DMark2001SE -> Favourite Game!
Any word on the P9X79 blocks?
Thanks!
3930K@4.5ghz, P9X79 Deluxe, XFX 6850 x2, 32gb GSkill 1600, Corsair AX850, Swiftech Apogee XTL rev2, XSPC EX360
I believe first week after new year, I'm currently validating it :P
EK Water Blocks R&D
ekwb.com
Hobby: Rotary SS bench unit (LPG/R-507) | -75°C Auto-cascade (R-600/R-290/R-744) | Plate HX water chiller (1kW cooling power) | My 2nd cascade MP14FB R-507/R-1150 | Mini cascade R-507/R-1150 | GPU single-stage | Mach I restoration mod -> -38°C @ 230W
Milestones: 7.12GHz P4 | 6.84GHz K10.5 | 6.45GHz Ci5 | 3.31GHz K7
3DMark2001SE -> Favourite Game!
Hi, I am new to this forum.
Here is my build in progress.
Why buy 8 ram slots if not to install 64gb ram?
+1
+1
and
+1
I posted my complaints about the new EK design on their new HD7970 block thread but it seems they're going with stripes all the way with all their new designs. This will get boring very fast.
No stripes, clean as hell. But then I don't like the overload of nickel or whatever it is at the top of the block.
Last edited by TJ Tom; 01-03-2012 at 07:31 AM.
Bookmarks