bloodrage and 980x two questions.

[Nostromo]

How do I OC this without the bios adding the extra +1 to multi? if i set 32 it makes it 33, etc..

Also is there a way to tighten vdroop? I set 1.35 in bios, and MM shows 1.42, and it spikes to 1.47 under load! this is with vdroop compensation enabled.


thanks

Nostromo

[Mescalamba]

CPU Turbo - Disabled = you will get multi you want not +1

vdroop is "enabled" when it says in BIOS that its disabled .. so you in fact disabled vdroop.

They should fix this..

Plus if you disable PPM, CxE and especially SpeedStep, you will get much more consistent voltage.

[Nostromo]

CPU Turbo - Disabled = you will get multi you want not +1

vdroop is "enabled" when it says in BIOS that its disabled .. so you in fact disabled vdroop.

They should fix this..

Plus if you disable PPM, CxE and especially SpeedStep, you will get much more consistent voltage.

Thank you for reply.

I forgot about the vdroop setting being reversed. this helped the swing is more like .01 now, thanks.

after exploring the multi issue though, no matter what I do I MUST have cpu turbo enabled, AND PPM enabled to even get my multi above 25 and then it adds +1 to whatever i set it at. Hmm.

I guess it's fine, just wanted to try clocking without it.

Thanks for your help.

Nostromo