Yeah the fan is weak, as is every CM fan I have ever gotten with a case. The size and the on/off switch for LED's are it's only redeeming factors.
Yes I have a MCR220 up top and cannot fit my optical drive in the top slot.
Yeah the fan is weak, as is every CM fan I have ever gotten with a case. The size and the on/off switch for LED's are it's only redeeming factors.
Yes I have a MCR220 up top and cannot fit my optical drive in the top slot.
Dark Star IV i5 3570K | Asrock Z77 Extreme4 | 8GB Samsung 30nm | GTX 670 FTW 4GB + XSPC Razer 680 | 128GB Samsung 830 Apogee HD White | 140MM UT60/120MM UT45/120MM ST30 | XSPC D5 V2
front blue led fan provides enough airflow, but it makes a noise so it needs undervolting
comparing with gtyphoon their noises are near the same, but gtyphoon provide twice more airflow
also i noticed that grill on the back side makes noise even with good fans, say one fan on rad has a noise much less than the same fan on the backside, due to those grill
but cutting this grill would hurt overall look of the case i guess
Last edited by rioja; 04-28-2010 at 12:47 AM.
Intel Xeon W3520 4200MHz HT
Foxconn Bloodrage
3x2Gb Patriot Viper II DDR3-1600 6-6-6-16
MSI GTX480 M2D15 850/1700/2000
Samsung F1 1TB
Corsair TX950W
Stacker 832 w/ Dual Loop Watercooling aka *Bong Build*
NEC 2690WUXi
Loop 1: Laing DDC1-T -> Watercool HK 3.0 LT -> Thermochill PA120.3 -> Bloodrage NB -> EK Res 150
Loop 2: Laing DDC1-T -> EK-FC GTX480 -> Thermochill PA120.2 -> EK Res 150
*New* CM 690 II Advanced Watercooled
*Coming soon* Stacker 832 Rebirth!
i have a question, did you guys removed the filter from the psu. i mean the bottom fan openings come with the filter istall but the psu filter doesnt come install, i left mine off cause i want the psu to run cooler as the filter restrict airflow alot, is this a wise thing to do?
You're fine. Provided you aren't keeping it on the floor in a dusty room...
Dark Star IV i5 3570K | Asrock Z77 Extreme4 | 8GB Samsung 30nm | GTX 670 FTW 4GB + XSPC Razer 680 | 128GB Samsung 830 Apogee HD White | 140MM UT60/120MM UT45/120MM ST30 | XSPC D5 V2
mmm I will get a better 140mm fan just in case then thanks,btw can a 2x140mm rad with the thickness of swiftech fit on top?
Intel Xeon W3520 4200MHz HT
Foxconn Bloodrage
3x2Gb Patriot Viper II DDR3-1600 6-6-6-16
MSI GTX480 M2D15 850/1700/2000
Samsung F1 1TB
Corsair TX950W
Stacker 832 w/ Dual Loop Watercooling aka *Bong Build*
NEC 2690WUXi
Loop 1: Laing DDC1-T -> Watercool HK 3.0 LT -> Thermochill PA120.3 -> Bloodrage NB -> EK Res 150
Loop 2: Laing DDC1-T -> EK-FC GTX480 -> Thermochill PA120.2 -> EK Res 150
*New* CM 690 II Advanced Watercooled
*Coming soon* Stacker 832 Rebirth!
what is it for?
Intel Xeon W3520 4200MHz HT
Foxconn Bloodrage
3x2Gb Patriot Viper II DDR3-1600 6-6-6-16
MSI GTX480 M2D15 850/1700/2000
Samsung F1 1TB
Corsair TX950W
Stacker 832 w/ Dual Loop Watercooling aka *Bong Build*
NEC 2690WUXi
Loop 1: Laing DDC1-T -> Watercool HK 3.0 LT -> Thermochill PA120.3 -> Bloodrage NB -> EK Res 150
Loop 2: Laing DDC1-T -> EK-FC GTX480 -> Thermochill PA120.2 -> EK Res 150
*New* CM 690 II Advanced Watercooled
*Coming soon* Stacker 832 Rebirth!
At the back NZXT FN 120 (crappy cheap white fan undervolted its not that bad imho). On top, pushing through the rad I'm using GT 1850rpm and then two Yates at the side (one as intake the other as exhaust).
Nope. Its a Black Ice GTS Lite.
Quite deffinitely...but you won't be able to use 140mm fans so there is no use for such combination...
Here is one my friend and I did last weekend
CPU: Phenom II X4 965 3.8GHz
CPU Cooler: Cooler Master H50 Water Cooler
Motherboard: Asus M4785TD-V EVO
Ram: OCZ Reaper 2x2GB 1,600MHz 7-7-7-24 T1
Video: Sapphire ATI Radeon HD 5830
HDD: WD Raptor 150GB Sata
Rom: LG DVD Burner Sata
Power Supply: Corsair HX1000 1000watt
OS: Windows 7 Ultimate 64 bit
Case: Cooler Master 690 Advanced II
Intel System
CPU: Intel i7 990x ES @ 4.2GHz 24/7 still kicking!
Mobo: Foxconn BloodRage X58 P11 Bios
Ram: Corsair Dominator 12GB DDR3
Water Cooling: Apogee XT, MCP655-B pump, MCR220 radiator, XSPC 5.25" Bay reservoir
Videocard: EVGA Nvidia FTW+ GTX 1060 6GB
OS HDD: Samsung 950 Pro 512 MB M.2
Strorage HDD: W.D. VelociRaptor 300GB
Storage HDD: W.D. 500GB
PSU: Enermax Evo Galaxy 1250 Watt
Case: Cooler Master Cosmos S
Roms: Lite On DVD Burner
Roms: Asus Bluray Burner
OS: Windows 7 Ultimate 64-bit
do anyone notice that front led is not blue actually? itr's rather lilac
it's not good coz other my leds are real blue.
Intel Xeon W3520 4200MHz HT
Foxconn Bloodrage
3x2Gb Patriot Viper II DDR3-1600 6-6-6-16
MSI GTX480 M2D15 850/1700/2000
Samsung F1 1TB
Corsair TX950W
Stacker 832 w/ Dual Loop Watercooling aka *Bong Build*
NEC 2690WUXi
Loop 1: Laing DDC1-T -> Watercool HK 3.0 LT -> Thermochill PA120.3 -> Bloodrage NB -> EK Res 150
Loop 2: Laing DDC1-T -> EK-FC GTX480 -> Thermochill PA120.2 -> EK Res 150
*New* CM 690 II Advanced Watercooled
*Coming soon* Stacker 832 Rebirth!
CPU: Core i7-2600K@4.8Ghz Mobo: Asus Sabertooth P67 Case: Corsair 700D w/ 800D window
CPU Cooler: Corsair H70 w/ 2 GTs AP-15 GPU: 2xGigabyte GTX 670 WindForce OC SLI
RAM: 2x8GB G.Skill Ripjaws PSU: Corsair AX850W Sound card: Asus Xonar DX + Fiio E9
HDD: Crucial M4 128GB + 4TB HDD Display: 3x30" Dell UltraSharp 3007WFP-HC
Speakers: Logitech Z-5500 Headphone: Sennheiser HD650
Hi
I'm considering this case but I need to install some SAS disk with this connector
So which is the distance between the hard disk and the hard disk connector side panel?
Regards
Ugo
this is (my) computing machine with two double radiators on board
Intel Xeon W3520 4200MHz HT
Foxconn Bloodrage
3x2Gb Patriot Viper II DDR3-1600 6-6-6-16
MSI GTX480 M2D15 850/1700/2000
Samsung F1 1TB
Corsair TX950W
Stacker 832 w/ Dual Loop Watercooling aka *Bong Build*
NEC 2690WUXi
Loop 1: Laing DDC1-T -> Watercool HK 3.0 LT -> Thermochill PA120.3 -> Bloodrage NB -> EK Res 150
Loop 2: Laing DDC1-T -> EK-FC GTX480 -> Thermochill PA120.2 -> EK Res 150
*New* CM 690 II Advanced Watercooled
*Coming soon* Stacker 832 Rebirth!
thats amazing!
Raidmax ATOMIC - Core i7 3770s + Corsair H70 // Gigabyte H77N WIFI // Corsair Vengeance 2x4GB 2133mhz // EVGA GTX1060 ACX2.0// Kingston SUV400 480Gb // Sharkoon SFX500L
Looking good
Dark Star IV i5 3570K | Asrock Z77 Extreme4 | 8GB Samsung 30nm | GTX 670 FTW 4GB + XSPC Razer 680 | 128GB Samsung 830 Apogee HD White | 140MM UT60/120MM UT45/120MM ST30 | XSPC D5 V2
I'm very interested in buying this case but am not sure about fitment. Will a Enermax revolution 1050 fit in the bottom along with a 240 rad? The Enermax is 7.4in long.
9950BE @ 3.1Ghz
MSI DKA-790GX Platinum
HIS 4850 Turbo
4GB Corsair Dominator 1066
Enermax Revolution 1050
MCP355>MCP220>MCW60>Enzotech Sapphire>Micro-res>gets the job done
Intel Xeon W3520 4200MHz HT
Foxconn Bloodrage
3x2Gb Patriot Viper II DDR3-1600 6-6-6-16
MSI GTX480 M2D15 850/1700/2000
Samsung F1 1TB
Corsair TX950W
Stacker 832 w/ Dual Loop Watercooling aka *Bong Build*
NEC 2690WUXi
Loop 1: Laing DDC1-T -> Watercool HK 3.0 LT -> Thermochill PA120.3 -> Bloodrage NB -> EK Res 150
Loop 2: Laing DDC1-T -> EK-FC GTX480 -> Thermochill PA120.2 -> EK Res 150
*New* CM 690 II Advanced Watercooled
*Coming soon* Stacker 832 Rebirth!
I was looking to do a 240 in the top and bottom. Technically I could mount a 120 on the bottom and the back, but I'd rather not.
9950BE @ 3.1Ghz
MSI DKA-790GX Platinum
HIS 4850 Turbo
4GB Corsair Dominator 1066
Enermax Revolution 1050
MCP355>MCP220>MCW60>Enzotech Sapphire>Micro-res>gets the job done
Would it be for the hardware in your sig? A single, quality 120.2 should do you well
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Yes it is the hardware in my sig. I currently run a mcr220 for a cpu loop that is working fine, but I would like the extra capacity since I may be upgrading soon.
9950BE @ 3.1Ghz
MSI DKA-790GX Platinum
HIS 4850 Turbo
4GB Corsair Dominator 1066
Enermax Revolution 1050
MCP355>MCP220>MCW60>Enzotech Sapphire>Micro-res>gets the job done
Bookmarks