Is that XSPC UV orange tubing? I hope it is, as thats what i want mine to look like!
No, it's PrimoChill RED UV tubing (: No 100% satisfied, i wanted pure red, but in my current situation, it's ok (:
ASUS P5E Deluxe X48 | C2Q Q9550@testing[Fuzion v2+MCR320+MCP655] | G.Skill 4x2GB F2-8800CL5D-4GBPQ@testing | Sapphire 4870X2@ testing | 150GB WD VelociRaptor + 2xWD6400AAKS | Chieftec CFT-850-14C | Iiyama E2403WS | Razer DeathAdder | CM CosmosS Black
Project: HeadShot
Intel i7 3770k | Corsair H100
EVGA GTX-590 Classified | XSPC GTX 590 Waterblock
Gigabyte G1.Sniper 2 MotherBoard | Swiftech MCR-320 Res/Rad/Pump
16GB Corsair Vengeance Low Profile Ram
Crucial M4 128GB / Intel X25-M 160GB / WD 1TB Black
Corsair AX850W PSU
27" Apple Cinema Display (2560x1440)
Corsair 600t White
Picture
You best be Crunching and Folding/GPUgrid'ing!
[XC] gomeler - Public note: If you PM me to tell me that I am disrespectful at least have space in your PM box so I can tell you I don't care.
[XC] gomeler - I come to the news section to ban people, not read complaints.
I heart gomeler!
ASUS P5E Deluxe X48 | C2Q Q9550@testing[Fuzion v2+MCR320+MCP655] | G.Skill 4x2GB F2-8800CL5D-4GBPQ@testing | Sapphire 4870X2@ testing | 150GB WD VelociRaptor + 2xWD6400AAKS | Chieftec CFT-850-14C | Iiyama E2403WS | Razer DeathAdder | CM CosmosS Black
Been leak testing my build in order to get it ready for Windows 7. This case made it a lot easier to stuff all I have in there.
ASUS P6T Deluxe V2
Intel Core i7 920
3x2 Corsair Dominator 1600 (7-7-7-20)
Swiftech GTZ CPU block
EK-FC285GTX GPU block
2x Swiftech MCR-320s
Laing DDC 3.2 w/ XSPC Reservoir Top
5x Scythe S-Flex E fans
Various Feser and Bitspower fittings
(UN)Designs Rad Brackets and Z3 Bracket
Clearance of the Bitspower Triple Rotary Fittings and Rads:
@ ilal2ielli
Nice job mate but just a little constructive criticism, you may have been better off
mounting a 120.2 rad vertically instead of the 120.3. It would have given you a little
more room and the option to mount the third fan on the 120.3 at the top. but hey,
that's just my opinion , still a nice, clean case though .
Yeah, the 120.2 would have been a lot easier to mount and given me more space to work with, but the price difference between a 120.2 and a 120.3 was only $10 USD, so I opted to go bigger.
If I need to in the future, I plan to mount the fans on the top of the case outside pulling air out with a home-made shroud and maybe split the loop into two. I could also cut through the PSU chamber divider to mount the rad lower. Also, the original plan was to mount the other triple off the back of the case, but the watercooling holes on the back of the case aren't spread far enough apart to make routing easy.
- Autobot -
Intel Q9400 (3.6Ghz) / Asus P5Q Deluxe / 8GB Corsair XMS2 DDR2-800
MSI R6970 Afterburner 2GB / Asus Xonar DX
Crucial M4 128GB SSD / Seagate 640GB SATA2 / Lite-On DVD/RW Litescribe SATA
XFX XXX-Edition modular 650W PSU
Enzotech / Swiftech / Koolance
No, he knows they're both 120mm fans.
In this situation I'd mount the top radiator on the top of the case with a grille for protection and leave the fans inside the case (a 1-inch hole saw should leave enough room for the fittings and tube), although I'd have gone with a 120.4 up top and a 120.2 on the bottom if given the choice.
Bestec PSU??????
i7 975 EVGA X58 Classified 6Gb Corsair Dominator GT 2 x EVGA 285 FTW 2x 300Gb Velociraptor in RAID 0 WD Black 500Gb
WC loop 1: HK 3.0 Fesser 360 BP VREG BP NB D5 pump
loop 2: 2 x EVGA HC's Fesser 240 D5 pump
Nah i was suggesting he should use a double rad as opposed to the triple rad
mounted vertically, i.e the one which is upright, that way he could add the third
fan to the triple rad up the top. It would effectively be the same loop (same in
the sense that there will be five fans on two rads) only with a lot more room.
Sorry if i worded that poorly before .
Oh and just to be clear, i did know it was a triple at the top
Last edited by callen_1; 10-23-2009 at 04:57 PM.
For the corsair build he should have a 240mm rad mounted where the 360 is and move the 360 to the roof also where is the 360 getting its air from? there are no real intakes on that case unless it is just using the heated in case air.
He's probably already exhausting with those fans, and he could always have the fans set to pull air from the top but with everything on intake the air can't go anywhere except the one 120mm exhaust fan and the ty PSU which I seriously hope is jsut there for leak testing.
The case isn't fully sealed so air will get in somehow. I'm going to be testing it out to see if not having a front intake will give me good temps still. If not, I plan to get a Lian Li 120mm fan bay.
Correct.
The two 120mm up top are set to push through the rad as exhausts and the rear 140mm is an exhaust also. The only intake is the bottom 140mm. Bestec PSU is only for the leak testing while I'm still running my Q6600 setup. I've got a Seasonic M12 700w to use in the system.
The hole family ...
Pandora modification - full worklog on XtremeSystems
"Being second is to be the first of the ones who lose"
Ayrton Senna
Duality: Q9550 - P5Q Deluxe - 8GB OCZ - HD5850 - 4,64TB WD - HX650 - X-fi - Aquaero 4 - Lian Li V1000b II Plus @Dual loops watercooling
Loop 1 => DDC18w w/ EK X-top V2 - EK Supreme HF - EK FC5850 - PA120.3 - Multires 150
Loop 2 => DDC18w w/ EK X-top V2 - PA120.1 - MIPS mosfet 1&2 - mips NB - Mips Ramfreezer 4 - MIPS SB - Multires 150
Camino-Palmero
Nice, rich man
Intel Q9650 @500x9MHz/1,3V
Asus Maximus II Formula @Performance Level=7
OCZ OCZ2B1200LV4GK 4x2GB @1200MHz/5-5-5-15/1,8V
OCZ SSD Vertex 3 120Gb
Seagate RAID0 2x ST1000DM003
XFX HD7970 3GB @1111MHz
Thermaltake Xaser VI BWS
Seasonic Platinum SS-1000XP
M-Audio Audiophile 192
LG W2486L
Liquid Cooling System :
ThermoChill PA120.3 + Coolgate 4x120
Swiftech Apogee XT, Swiftech MCW-NBMAX Northbridge
Watercool HeatKiller GPU-X3 79X0 Ni-Bl + HeatKiller GPU Backplate 79X0
Laing 12V DDC-1Plus with XSPC Laing DDC Reservoir Top
3x Scythe S-FLEX "F", 4x Scythe Gentle Typhoon "15", Scythe Kaze Master Ace 5,25''
Apple MacBook Pro 17` Early 2011:
CPU: Sandy Bridge Intel Core i7 2720QM
RAM: Crucial 2x4GB DDR3 1333
SSD: Samsung 840 Pro 256 GB SSD
HDD: ADATA Nobility NH13 1GB White
OS: Mac OS X Mavericks
Pandora modification - full worklog on XtremeSystems
"Being second is to be the first of the ones who lose"
Ayrton Senna
Beatiful blocks Camino Palmero
Sorry for my bad english, its not my native language and my only friend is wordreference.com
E8500 4.2 Ghz // Rampage Extreme // BFG GTX 260 OCX Maxcore // 2Gb Patriot Viper 1970 Mhz CL9 // Samsung Spinpoint 400 Gb // X-FI Titanium Fatal1ty // Enermax Galaxy DXX 1Kw // Lian Li PC-V2110b // MurderMod Sleeving // Windows 7 Ultimate x64 RTM
Ybris A.C.S. Black // EK-FC280 GTX SLI Nickel/Acetal // Bitspower WBAIX48NSE-B // Thermalright HR-09 S&U // EK Multioption 250 // MCP655 & EK D5 X-TOP V2 // BI GTX 360 // Primochill LRT 1/2" x 3/4" // BP Barbs // Distilled + silver
Logitech G9 // Steelpad SX // Sennheiser HD 555 // Steelkeys 6G
Bookmarks