ASUS M4A79 Deluxe LN2 Test without Vmod

[NewBeetle]

Yesterday I enjoyed extreme cooling with Phenom II & "ASUS M4A79 Deluxe".
Phenom II & M4A79-D brought me to -190 Celsius world easily.
This mobo seems to be able to bring out Phenom II power to the limit without Vmod.







modPI1.5 XS 8M: 2m29.891s@6049.4MHz (263.0MHz x 23.0)


Setup
M/B: ASUS M4A79 Deluxe (BIOS:0801)
M/B Bed: V-TEC ARC Bed Rev.5.3
CPU: Phenom II 940 BE (0850BPMW)
CPU cooling: Maxx NEO + LN2 / Temp:-190C
Chipset Cooling: stock + FAN
Mem:Team PC2-8500 C4 1GB x2
VGA: MSI NX7900GTO 512MB PCI
HDD: Maxtor 5T040H4 (IDE)
PSU: SilverStone OP1200
OS: Windows XP SP3

[BIOS setting]
CPU Ratio: 20.0
FSB Freq: 263
PCIE Freq: 100
DRAM Freq: 1052
CPU/NB Freq: 4208
HT Link Speed: 1GHz

CPU Voltage: 1.8125
CPU/NB Voltage: 1.5375
CPU VDDA 2.70
DRAM Voltage: 2.34
HT Voltage 1.28
NB Voltage: 1.28
NB 1.8V: 1.80
SB Voltage: 1.20

DRAM Timing: 2T-4-4-4-A-10-A-A-A

TurboV Setup

[miahallen]

Great work Mitsuaki-san! I'm so tempted to get PII, looks like so much fun

[(TAT")]

Great work Mitsuaki-san!
btw, we have the same board on hand and we found out that the Vcore supply will surge quite seriously after 1.8V.
Let's say we set 1.9V, the A.I monitor in BIOS on the next boot will show that it is 1.94V,
so did you face anything similar?

[eva2000]

Nice NB.. sure is tempting these Phenom II

[dread77]

Nice work NewBeetle san!!! But my opinion is that we need more than 1,9V from Asus to bring out the real power of PhenomII 940.

This is the max validation I got using M4A79-Deluxe, though with M3A79-T Deluxe vmodded, using the same chip, I got 6,2+ with 1,96V.

But, most definitely, this a powerful board!!!!

[msimax]

awesome oc and crazy nb

[FatAlbert]

as always "magic" from Japan

NewBeatle, what about 1m ?

[EnJoY]

Awesome results...time to get back to my Phenom.

[massman]

Can't wait for the 1M scores to be published

[Bullet92]

NewBeetle has always something to suprise us. Very nice results and awesome board. Keep us updated

[NewBeetle]

Great work Mitsuaki-san! I'm so tempted to get PII, looks like so much fun

Thank you, miahallen-san.
Yes, PII is so much fun.

Great work Mitsuaki-san!
btw, we have the same board on hand and we found out that the Vcore supply will surge quite seriously after 1.8V.
Let's say we set 1.9V, the A.I monitor in BIOS on the next boot will show that it is 1.94V,
so did you face anything similar?

Thank you, (TAT")-san.
I didn't check it.
Next time, I will monitor it by multi meter and confirm it.

Nice NB.. sure is tempting these Phenom II

Thank you always, eva2000-san.
Phenom II & M4A79-D tempt me to do hard LN2 benching.

Nice work NewBeetle san!!! But my opinion is that we need more than 1,9V from Asus to bring out the real power of PhenomII 940.

This is the max validation I got using M4A79-Deluxe, though with M3A79-T Deluxe vmodded, using the same chip, I got 6,2+ with 1,96V.

But, most definitely, this a powerful board!!!!

Thank you, dread77-san.
I will surely make vmod M4A79-D in the near future.

awesome oc and crazy nb

Thank you, msimax-san.

as always "magic" from Japan

NewBeatle, what about 1m ?

Thank you always, Fatalbert-san.
Sorry, I didn't try 1M or 32M this time.
Next I will try them.

Awesome results...time to get back to my Phenom.

Thank you, EnJoY-san.
Let's enjoy Phenom and II together!

Can't wait for the 1M scores to be published

Next I will try it.

NewBeetle has always something to suprise us. Very nice results and awesome board. Keep us updated

Thank you, Bullet92-san.

DEWA DEWA

[fiveprime]

Great results as always. What are the dimensions on the base of your LN2 pot?

[demonkevy666]

just run 3dmark06 I'm stick of people saying AMD phenom II can't run 3dmark06 under LN2.

[OC_Windforce]

Fantastic.results
I am glad as look at you again.

[NewBeetle]

Let's say we set 1.9V, the A.I monitor in BIOS on the next boot will show that it is 1.94V,
so did you face anything similar?

I saw similar Vcore behavior.
BIOS setting : 1.8125V
BIOS H.W. monitor : 1.844V
Actual Vcore : 1.845V
ASUS PC Prove II : 1.89V

Great results as always. What are the dimensions on the base of your LN2 pot?

Thank you, fiveprime-san.
My LN2 pot base(bottom) dimensions : 44mmx44mm
Look at this picture.

just run 3dmark06 I'm stick of people saying AMD phenom II can't run 3dmark06 under LN2.

I saw phenom II can run 3dmark06 under LN2 in AKIBA on Jan-11.
Futto-kun got "29666" 3D06Marks.

Fantastic.results
I am glad as look at you again.

Thank you always, OC_Windforce-san.
I tried 1M last night.
But my good DDR2 memories all died.
So I used "Dominator 8500" that is not so good......
I need to get new good DDR2 memories.

modPI1.5 XS 1M: 11.422s@5989.2MHz (226.0MHz x 26.5)


DEWA DEWA

[x-powerx800pro]

NB F TO 42** VERY GOOD....

[ZoLKoRn]

Very very nice work again NewBeetle-san you'r always rock !

well for the Vcore on this board, cpu-z it can't show voltage to actually same as bios setting right ? because my board i never saw it correct with bios

Thank you

[MARCO74]

Great result NewBeetle-san and fantastic LN2 pot 44mmx44mm

[OC_Windforce]

Newbettle-san
nice nice~ 1M

I hope that you get good Memory.


I possess AM2 940 0839 Batch but is not doing LN2.
Reason does not have good board and is preparing i7 965 LN2 present.


My i7 965[3838A610]
MAX CLK=4.62G HT-On , Vcore=1.54V , Cooling=Air(Ultra eX-120) Room TEMP=21c
http://pds10.egloos.com/pds/200901/3...1cad90ac1a.jpg



Did not pass more than 5G in RIIE .. (4.78G 32M Pass)
To differ with Japan team I used 2GByte Triple Memories.

Is thought possible CPU more than 5G.
I do not know why is bad in LN2.(Can act -100 degrees CPU)

Please, hope not to be CPU problem.
Is going to use Intel X58SO.

I expect recording that is nice to you again.

[Smartidiot89]

Nice results! And this is only on early revisions of Phenom II

[tiborrr]

Fantastic clocking, Newbettle. ~4.3GHz NB is really impressive

[NewBeetle]

NB F TO 42** VERY GOOD....

Thank you, x-powerx800pro-san.

Very very nice work again NewBeetle-san you'r always rock !

well for the Vcore on this board, cpu-z it can't show voltage to actually same as bios setting right ? because my board i never saw it correct with bios

Thank you

Thank you always, ZoLKoRn-san.
You can check the acutual Vcore at this point.


(photo by CAL930)

Great result NewBeetle-san and fantastic LN2 pot 44mmx44mm

Thank you, MARCO74-san.

Newbettle-san
nice nice~ 1M

I hope that you get good Memory.


I possess AM2 940 0839 Batch but is not doing LN2.
Reason does not have good board and is preparing i7 965 LN2 present.


My i7 965[3838A610]
MAX CLK=4.62G HT-On , Vcore=1.54V , Cooling=Air(Ultra eX-120) Room TEMP=21c
http://pds10.egloos.com/pds/200901/3...1cad90ac1a.jpg

Did not pass more than 5G in RIIE .. (4.78G 32M Pass)
To differ with Japan team I used 2GByte Triple Memories.

Is thought possible CPU more than 5G.
I do not know why is bad in LN2.(Can act -100 degrees CPU)

Please, hope not to be CPU problem.
Is going to use Intel X58SO.

I expect recording that is nice to you again.

Thank you, OC_Windforce-san.
My DDR2 memories revived.
I can run 32M today.

I wish you can get good results next time.

Nice results! And this is only on early revisions of Phenom II

Thank you, Smartidiot89-san.

Fantastic clocking, Newbettle. ~4.3GHz NB is really impressive

Thank you, tiborrr-san.
I can run 32M @4.3G NB.

modPI1.5 XS 32M: 12m20.641s@5962.2MHz (271.0MHz x 22.0)


32M TurboV Setup


modPI1.5 XS 1M: 11.313s@6049.2MHz (263.0MHz x 23.0)


DEWA DEWA

[Bullet92]

Nice results again. Glad to hear that your memory is alive
Keep pushing, want to se sub 11s in 1M soon

[V2-V3]

NewBeetle,


What are the Maximum CPU Multiplier and Voltage settings in BIOS with the M4A79T?

[NewBeetle]

Nice results again. Glad to hear that your memory is alive
Keep pushing, want to se sub 11s in 1M soon

Thank you so much, Bullet92-san.
I think sub 11s needs 6.2G-CPUClock & 4.5G-NBClock.

NewBeetle,


What are the Maximum CPU Multiplier and Voltage settings in BIOS with the M4A79T?

Sorry, my mobo not M4A79T(DDR3) but DDR2 model.

M4A79 Deluxe's Maximum CPU Multiplier in BIOS : x35
Maximum CPU Voltage settings in BIOS : 1.9V (OV_CPU jumper enabled)