OK, I`ll got digicam So photos should be much better and often than now
Awesome LukeXE not many folks can pull this type of a build off so we are all very curious how it gets done.
I wish I had your skill level and knowledge!!
Never empower an idiot with a response....
http://en.wikipedia.org/wiki/Troll_%28Internet%29
Seller/Buyer Reputation:
Heatware: http://www.heatware.com/eval.php?id=50905
Ebay: {Family Account} Kasyg3 http://myworld.ebay.com/kasyg3/
Ebay: {My personal Account} Sdumper http://myworld.ebay.com/sdumper/
iTrader: http://www.blazingpc.com/forum/itrader.php?u=28
Thanks, I hope that everything will be okay and we all will see nice loaded temperatures + small unit.
Please notice my post in your other thread.
http://www.xtremesystems.org/forums/...150292&page=36
excellent build luke, this thing is going to rock. cant wait to see more updated pics and i like your idea with the mapp gas bottles.
void, you obviously are looking past every precaution posted on these forums. just because you do remodel work every day dosent mean you can put together one of these thing and still have all 5 senses and all extremities left after your done. especially any form of cascade. if you want info i suggest starting at the top at the stickies. i also reccomend reading the ones about safety first especially in your case.
CM Stacker 830 Classified Scheme *In Progress*
Antec TPQ-1000
i7 950
OCZ Reaper 3x2gb 1066 7-8-8
Crucial C300 128gb
HD5850
Asus Xonar Essence STX
What you are saying is illegal and horrible for the environment. You posted a completely random post then posted a total of 6 times in the thread, none of which was relevant to the thread, relevant to phase change, relevant to computers, relevant to the forums. I hope the mods delte your spam, and you stop trolling, and you become concious of a worldwide problem. Are you drunk?
Luke, sorry somebody is spamming where you showcase your work, and sorry its happened 6 times!
mentally confused and prone to wandering
Void this is the second thread I see you posting in with absolutely no respect for other people, people who have earned that respect and deserve to get it from me and you.
I reported you, let the mods look at your posting habit, but if it where up to me, you will get some time to think about your attitude. And btw, I think this wouldn't be the first time someone gets a perm ban even for talking about the illegal and harmmfull practises you are talking about now
post pics to shut up the thread craping
Keep in mind that if he doesn't live in the United States, then EPA has got absolutely no relevance whatsoever.
Anyway, my understanding is that you don't need any kind of permit to simply build a refrigeration system - after all, you're basically just brazing copper tubes together - but it's your acquisition and use of refrigerant gases that falls under EPA legislation. I could be wrong - feel free to politely correct me if I'm wrong.
If you have a cylinder of propane, or methane, ethylene, carbon dioxide or whatever, then you can do whatever you please with it, since it's not a chlorofluorocarbon or a hydrochlorofluorocarbon, and as such, it doesn't fall under EPA's restrictions as a potentially environmentally harmful refrigerant.
STOP STOP STOP STOP POSTING IN THIS THREAD GTFO OF THIS THREAD STOP STOP STOP STOP STOP STOP POSTING IN THIS THREAD GTFO
YOU HAVE TURNED THIS THREAD TO . DO NOT REPLY, DO NOT POST IN THE PHASE SECTION AGAIN OR WE WILL CATCH YOU VENTING AND REPORT IT (and make lots of monies)
edit: and yes, you building a chiller is illegal and i can't wait for you to post a thread on it and prove you vented
mentally confused and prone to wandering
VOID ygpm with the best intentions
Edit:
Guys, he is talking about converting an ac into a chiller by submerging the heat exchanger and that way he's right he isn't going to leak gasses if he doesn't cut any pipes or treis to bend something into a shape which isn't going to bend that way
Sorry VOID_WARRANTY the confusion came from you mentioning pipe cutters in one of your posts, that made me think you where going to cut an unit up for parts and then assemble it. If you don't spring a leak, you're not breaking the law I seen to many threads here about chillers made this way by people without a license to say it's not legal or not advised. Only think I want to say is be carefull The Netherlands is abit below sea level already, I wouldn't want you to contribute to that rising even the slightest bit higher
And start that own thread for your build, you will get much better answers then I think
Last edited by Marvin_The_Martian; 11-23-2008 at 11:15 AM.
Can a mod please come in here and clean up this damn thread.. Void Warranty crapped on it and now it reeks of off-topic sauce. Would like this thread to be browse able in a few months without having to scroll past a page of off-topic garbage.
Luke, any ETA on when we'll be able to see stage 2 built? If I understand it correctly, the 2nd stage should be a pure R1150 loop. Looking forward to some -90C to -95C shots on the 2nd stage
Yeap, you undestand me correctly. 2nd stage SHOULD be R1150, pure but...
I think if I could make 1st stage running at -75*C loaded...THEN...
...I could fill 2nd stage with R14 (or with mix with that gass).
then 3st I could fill with methane blend. It should give to me super low temperature on evap. At all 2st with R14 could reach a bit higher discharge pressure than usual, with only -75 @ 1st stage.
But it`s hard thing to do. Everything depend on 1st capacity. It`s complicated, R1150/R744/R290/R507 blend is very hard, for me, to calibrate. I`m fighting with that but...1st design has potential, so I got good feelings.
ETA for 2st running should be in this week. Have to think what I`m expecting from 2nd stage as builder. I think I have to make it running with R14, so I would need to redesign compressor --> oil separator line (R14 flushes oil from oil separator, nobody wants oil in evap at -130C). I could use ZEROL oil or sth, but I`m not sure if I can get it here.
Tomorrow I have talk about job in HVAC job, probably I`ll get that job so I`ll have everything what I need from tools and gases, so I can make more profesionall job.
A lot to think. Have to talk with symphy what he expects from that unit. Things changed a bit, new processors, CB etc. I`m ot sure what he wants right now.
Last edited by LukeXE; 11-23-2008 at 01:35 PM.
Well it sounds like this thing will potentially be a beast, my only concern would be it being too cold The 1st stage blend in my opinion is too complicated, I'd suggest trying R600/R290/R1150 and cutting out the R744 and R507 if you are still working on that stage. R744 blows as a refrigerant and there's almost no purpose in using R507 when using R290. Just my two cents, take them for what they are worth Looking forward to seeing you complete this thing though!
From 1st thread... you wrote/show us photos LG compressors for 1st and 2nd stage.
But now what you using in this cascade?
And what we you used in Yoto cascade?- topic.Code:Compressors -- Toshiba 3/4HP for I stage I stage: 190cm of 0,8mm captube for R290 225cm of 0,8mm captube for R23 or CO2 or R170, depends on what I will have 240cm of 0,8mm captube for R1150.
I know that I'm not your client and I'm happy with that! You are making bull from trust others ppl.
I'm phase change builder too and I have some units on my account. Few notes from me: this project is big mistake from beggining. You never finish this cascade. B'couse how you want finish it, when you don't have R14?
You can lie ppl here and they trust you... I don't know why but they trust everybody.
C2D E8400 E0 @ 4GHz : DFI LANParty X48 UT T3R : Mushkin Black Ascent 2x1GB DDR3 : BFG GTX260 : Corsair HX520W
Can you read first post, that I noticed, that I used 1st stage from my another project ? What is wrong with quote`n specs of that stage from build for which it was done ?From the beggining of that topic I`m talking about 1st which I had left. And don`t be so sure about R14
Last edited by LukeXE; 11-23-2008 at 04:42 PM.
are there any new pictures from progress?
So what, those things are from junkjard ? New compressor, new condenser, new heatexchanger. Where is the difference of Toshiba and LG compressor with that same power capacity ?Quote:
Originally Posted by LukeXE View Post
I`m building this unit, not from old parts, I`m doing it from parts bought to your unit for your money. Everything, compressors, condensers, evap, heat exchangers, two way cut-off switches etc. I never spent your money for anything else.
...
Where is the difference in evap vs evap, where is difference in plate hx vs plate hx ?? I got tons of that stuff, to all I should stick "bought for ..." ?? and cant use it if it`s not bought originally for that build ?
Last edited by LukeXE; 11-23-2008 at 04:42 PM.
Hey Luke. its time you watched your language. I'll ask Ron or someone to come in here and sort this out.
sorry, but how I should react on such a bs...
His posts were already removed once.
Last edited by LukeXE; 11-23-2008 at 04:34 PM.
Put's on mod hat;
Gentlemen;
I think it's time some of you took a little vacation from XS so that you can think about your writing style.
That's the warning.
Post anything in this thread thats not constructive and your gone till 2009 minimum.
Capice?
Thanks for reading.
Crunch with us, the XS WCG team
The XS WCG team needs your support.
A good project with good goals.
Come join us,get that warm fuzzy feeling that you've done something good for mankind.
Bookmarks