http://www.performance-pcs.com/catal...oducts_id=3748
What about these? I know they're aluminum, but does the water even come in contact with it? With those, the water actually flows on the sides, through the "hydropaks", not just over the top...
I can't imagine your flow with 3 of these for a triple channel Nehalem board. I hate those PVC tubes at the top, and also they are aluminium. Otherwise, they look universal indeed
Q6600 G0 L740B126 Lapped, 2x1Gb Kingston HyperX DDR2-1200
Gigabyte 8800 GTS 512Mb OC 756-1890-1000
TT Toughpower 750 W (W0116) new 8xPCI-E Rev.
Western Digital Caviar SE16 WD6400 AAKS rocks
WC: Swiftech H2O-Apex Ultra 220 GT + PA120.3 5v
OCZ XTC RAM Cooler, HR-05 IFX + 80mm FAN (NB), 2x HR-09U type 2 (mosfets), Modded Zalman ZM NB-47J (SB), Arctic-Cooling MX-2
Vista 32 bits
------------
- ASUS P5K Premium bios 0612: (3.84GHz 8x480) @1.432v
------------
- P5B Deluxe: 3.60GHz (9x400) @1.33v *** Old Setup (P5B deluxe)
OCCT 2.x Final Download
You could always get a Mips ramfreezer 2 or 3 if you want to use more then 1, but its less ideal then them making a newer one for the new boards.
EVGA X58 Classified
Intel i7 965
Corsair Dominator 1600mhz 3x2gb
Nvidia GTX 295
aqua ramplex.. I should have a review up by next week.
Was using a tiny ass 5-6mm push fit barb, but then get the g1/8/1/4 coverter from bitspower which is 8mm and then into a danger den 1/2" fatboy
You can fit 3 memory modules on one block.
If you want copper, mips also sells the double mips freezer that cools 2 ram modules.
Last edited by Eddie3dfx; 07-31-2008 at 07:26 PM.
Asus P6T, I7-920, 6gb ocz xmp, 4890, Raid 0-1 Terabyte, full watercooled - Triple Loop 5 radiators
Bookmarks