Tried the same today Dinos. Same E8500 and Commando that wil do 600mhz FSB 32M with 6 multi on air. Problems to get over 593 with 9.5 multi though. Chip boots at -100 and runs -140 fine. No tweaks or pmem and cas5:
Tried the same today Dinos. Same E8500 and Commando that wil do 600mhz FSB 32M with 6 multi on air. Problems to get over 593 with 9.5 multi though. Chip boots at -100 and runs -140 fine. No tweaks or pmem and cas5:
Great clocks mate, do you think you were fsb limited at 9.5 multi or was it just the cpu speed coming to a grinding halt?
I can imagine 5611MHz is pretty much all it had in it.
Asus Crosshair V Formula-Z | FX 8350 | 2x4GB Trident-X 2600 C10 | 2x ATI HD5870 Crossfire | Enermax Revo 1050watt | OCZ Vertex 3 60GB | Samsung F1 1TB
Watercooling: XSPC Raystorm | EK 5870 Delrin fullcover | TFC X-changer 480 w/ 4x Gentle Typhoon | DDC2+ Delrin top | EK 200mm res | Primochill LRT 3/8 tubing
Case: Murdermodded TJ-07
sub 9 sec. SPi1M 940BE 955BE 965BE 1090T
Not sure Zeus. Ran it at Extera's, thanks a lot my friend it was good fun Gained a lot goin up from 1.64 to 1.84v but not a mhz from 1.84 to 1.95v. Think/hope it was board but we ran out of time unfortunately.
i don't think that's the case
i was 32M stable at 580 on 6 and 9 multi as well 585 8M SuperPi spotty and 1M 590
so i was just maxed out by FSB here donno
davemelb has done dual 32M SuperPi on air cooling at 600MHz (well it stopped 3/4 way which is very close to stable with some other CPUs) >> I have them at home
the chip i benched was happy doing the same tests with 1.67v as 1.8v so my chip certainly had plenty of steam left in it
nice clock my friend ,congrats
Dino-san, its bad to hear about the FSB limit on P965,with the same chip i was benching at 600+ on X38 and no more than 590 on P35 ,both dice cooled,i think the fsb limit is memory(divider?!?) related or imature bios (Blitz 1402 ),anyway i got a spare E8500 ,630FSB on air and its enough for 6ghz,and how i promisse to u i will send it for you (but you send me back after finishing )
Last edited by PcCI2iminal; 02-10-2008 at 03:21 PM.
Mojo
Family
Biostar TP55 XE - Core i7 860(ES) @ 4.2ghz - CNPS10X Extreme - G.SKILL 1600 - Galaxy GTX275 - Velociraptor 300GB x 2 - Zippy TypeR 600w
Criminal
Biostar Tpower X58A - 920~Gulf - G.SKILL2000CL8 - GTX580 - Intel 520 120GB - Antec HCP 1200w
Biostar TP67XE/TZ77XE4 2500k~3770K - G.SKILL 2800 - GTX480 - OCZ Vertex2 50GB - Corsair AX1200
Biostar Tpower X79 i7 3820 ~ E5 2680 - G.SKILL 2400C11 - GTX560Ti - Intel 520 120GB - AX1200i
Kids
P4GD1 - Pentium M 780 - XMS Xpert400 - GTX460 - Raptor 36GB - Aopen 560w
hey dude
nah man i am not posting in your thread to complain or anything it's all good lol
btw i finally received those VRs and sending it all to kayl today to send with the goodies
i will test it on X38 boards on LN2 soon
fingers crossed 600 stable for some 5.7GHz benching hehehe
dinos22
Hmm, maybe I misunderstood you. You have p5b dlx that maxes out @ what fsb (on air) with other chips, 600+? So, you also have 8500 that maxes at 590 1M on the same dlx?
If that's the case then it is cpu wall already on air. Freeze it and wall will rise up to 50-60fsb in the best case
I have tested 4 chips on 965. They all max out 620fsb flat on air. I must be either very luck or many 45nm will do 600+ easily
...
it must be my explanation hehe
this board used to below to a member called davemelb who tested 3xE8400 CPUs and all of them benchmarked 590MHz FSB with ease on air cooling
i don't know where the wall on this E8500 is as i haven't got the right board yet that can give me the FSB i need but i would not be surprised to take 6GHz screenshots if i found the right board as this CPU is a great overclocker with very low vcore and also it's a very hot CPU as well.....all the makings of a great chip hahahah
dinos22 when we are talking about high fsb CPUs, what did u do with 620mhz air 6850?
Born to overclock
which X38 board you used to get 600+ fsb??
nice clock you all have.
really tempting to buy one of those chips when my commando comes back from rma.
What do these puppies on air ???
Last edited by Disaster_Master; 02-12-2008 at 03:01 AM.
To be a professional noob/idiot
* Default factory speed is for noobs.
* Everything must go above the speed that the factory consider safe.
* Everything for more performance
* Everything fits, and everything can be broken.
* Most problems can be fixed by adding a volt or two.
* Post things in your signature that makes no sense at all.
"We are competing, competing to win. And the main motivation is to compete for victory" - Ayrton Senna
Where courage, motivation and ignorance meet, a persistent idiot awakens.
lol,I know my friend but mine seems to be a bit better and probably will hit 6ghz,of course i want that number and I'm searching for LN2(thx Duck-san & Omega-san for helping) for a 6ghz screen but I need some time (weeks i think)and you are ready to do it now,so you go first hehehe,thats it
Mojo
Family
Biostar TP55 XE - Core i7 860(ES) @ 4.2ghz - CNPS10X Extreme - G.SKILL 1600 - Galaxy GTX275 - Velociraptor 300GB x 2 - Zippy TypeR 600w
Criminal
Biostar Tpower X58A - 920~Gulf - G.SKILL2000CL8 - GTX580 - Intel 520 120GB - Antec HCP 1200w
Biostar TP67XE/TZ77XE4 2500k~3770K - G.SKILL 2800 - GTX480 - OCZ Vertex2 50GB - Corsair AX1200
Biostar Tpower X79 i7 3820 ~ E5 2680 - G.SKILL 2400C11 - GTX560Ti - Intel 520 120GB - AX1200i
Kids
P4GD1 - Pentium M 780 - XMS Xpert400 - GTX460 - Raptor 36GB - Aopen 560w
Mojo
Family
Biostar TP55 XE - Core i7 860(ES) @ 4.2ghz - CNPS10X Extreme - G.SKILL 1600 - Galaxy GTX275 - Velociraptor 300GB x 2 - Zippy TypeR 600w
Criminal
Biostar Tpower X58A - 920~Gulf - G.SKILL2000CL8 - GTX580 - Intel 520 120GB - Antec HCP 1200w
Biostar TP67XE/TZ77XE4 2500k~3770K - G.SKILL 2800 - GTX480 - OCZ Vertex2 50GB - Corsair AX1200
Biostar Tpower X79 i7 3820 ~ E5 2680 - G.SKILL 2400C11 - GTX560Ti - Intel 520 120GB - AX1200i
Kids
P4GD1 - Pentium M 780 - XMS Xpert400 - GTX460 - Raptor 36GB - Aopen 560w
***** Visit us on PCWorld.fr *****
Bookmarks