Exahertz could you try distilled water and some anti aglae stuff and see if it is conductive
Exahertz could you try distilled water and some anti aglae stuff and see if it is conductive
Current System Build
Designaton:" Rad Hat "
__________________
Flow Order: >> Rad's 1 & 2 in parallel > Res > Pump > CPU > GPU > SB > NB > Mosfet 1 > Mosfet 2 >>
- Mother Board, RAM and CPU:
Mobo: Asus Maximus Formula (SE) BIOS 1207 | CPU: Intel q9650 @ 3.80GHz Vcore 1.272v | RAM: Crucial Ballistix Tracer PC2 8500 4x1GB- Graphics Processor:
GPU: BFG 8800GTX | BFG 8600GT (Quad Monitor Setup)- Hard Drives:
RAID: 2x 74GB Raptors on RAID 0 for OS Drives
- Case and Power Supply:
Case: Antec Case | PS: OCZ ProXstreame 1000W- Water Cooling:
Pump: Swiftech MCP655-B | Rad: Dual Swiftech MCR320's | Fans: 6x Yate Loon D12SH-12's (W/ Variable RPM Rheostat) @ 88CFM Max Each - 528CFM Total!!!- (Water Blocks and Fittings):
CPU: D-Tek Fusion Block | GPU: Danger Den Full Coverage 8800 Block | Mobo: EK's Mosfet, NorthBridge and SouthBridge Blocks
Res: Swiftech Micro | Tee's: 4x MartinM's High Flow Copper Tee's | Elbow's: None | Y's: None
Temperatures: CPU: 57°C Max, Running Prime95 | GPU: 58.3°C Max, Running 3Dmark | NorthBridge: Untested!
Last Updated 11/11/09
Thanks Exahertz! So distilled water with anti aglae is not conductive as shown in the second picture?
Current System Build
Designaton:" Rad Hat "
__________________
Flow Order: >> Rad's 1 & 2 in parallel > Res > Pump > CPU > GPU > SB > NB > Mosfet 1 > Mosfet 2 >>
- Mother Board, RAM and CPU:
Mobo: Asus Maximus Formula (SE) BIOS 1207 | CPU: Intel q9650 @ 3.80GHz Vcore 1.272v | RAM: Crucial Ballistix Tracer PC2 8500 4x1GB- Graphics Processor:
GPU: BFG 8800GTX | BFG 8600GT (Quad Monitor Setup)- Hard Drives:
RAID: 2x 74GB Raptors on RAID 0 for OS Drives
- Case and Power Supply:
Case: Antec Case | PS: OCZ ProXstreame 1000W- Water Cooling:
Pump: Swiftech MCP655-B | Rad: Dual Swiftech MCR320's | Fans: 6x Yate Loon D12SH-12's (W/ Variable RPM Rheostat) @ 88CFM Max Each - 528CFM Total!!!- (Water Blocks and Fittings):
CPU: D-Tek Fusion Block | GPU: Danger Den Full Coverage 8800 Block | Mobo: EK's Mosfet, NorthBridge and SouthBridge Blocks
Res: Swiftech Micro | Tee's: 4x MartinM's High Flow Copper Tee's | Elbow's: None | Y's: None
Temperatures: CPU: 57°C Max, Running Prime95 | GPU: 58.3°C Max, Running 3Dmark | NorthBridge: Untested!
Last Updated 11/11/09
Umm so basically everything except distilled water is conductive
Yeah i guess so. Oh well just have to be more careful when i am setting up to prevent leaks
Last edited by PeppeX; 12-26-2007 at 05:25 PM.
E6600 @3.4 1.408v U120Ex Lapped | GA-P35-DS3P | Ballistix Tracers 8500 2gb @1063mhz 4-4-4-12 | Asus 8800GT 512mb + HR-03GT 702/1728/950 | Antec P182SE | X-Fi Fatal1ty + AT AD900 + Z-2300 | TT 750w modular
Fluorinert is an entirely different animal which really shouldn't be lumped in with the 'non-conductive PC coolants'.
Considering that we're not really dealing with anything above 12V DC... 250V DC is an acceptable short voltage
After all, you can get air to short if the voltage is high enough...
I'm doing science and I'm still alive...
Last edited by Exahertz; 12-26-2007 at 05:36 PM.
Current System Build
Designaton:" Rad Hat "
__________________
Flow Order: >> Rad's 1 & 2 in parallel > Res > Pump > CPU > GPU > SB > NB > Mosfet 1 > Mosfet 2 >>
- Mother Board, RAM and CPU:
Mobo: Asus Maximus Formula (SE) BIOS 1207 | CPU: Intel q9650 @ 3.80GHz Vcore 1.272v | RAM: Crucial Ballistix Tracer PC2 8500 4x1GB- Graphics Processor:
GPU: BFG 8800GTX | BFG 8600GT (Quad Monitor Setup)- Hard Drives:
RAID: 2x 74GB Raptors on RAID 0 for OS Drives
- Case and Power Supply:
Case: Antec Case | PS: OCZ ProXstreame 1000W- Water Cooling:
Pump: Swiftech MCP655-B | Rad: Dual Swiftech MCR320's | Fans: 6x Yate Loon D12SH-12's (W/ Variable RPM Rheostat) @ 88CFM Max Each - 528CFM Total!!!- (Water Blocks and Fittings):
CPU: D-Tek Fusion Block | GPU: Danger Den Full Coverage 8800 Block | Mobo: EK's Mosfet, NorthBridge and SouthBridge Blocks
Res: Swiftech Micro | Tee's: 4x MartinM's High Flow Copper Tee's | Elbow's: None | Y's: None
Temperatures: CPU: 57°C Max, Running Prime95 | GPU: 58.3°C Max, Running 3Dmark | NorthBridge: Untested!
Last Updated 11/11/09
New work-in-progress - watercooled dual-rad Lian-Li A05:
http://www.xtremesystems.org/forums/...d.php?t=156162
Opteron 175 @ 3.0GHz
273x11
Bookmarks