HWMonitor v1.0.5.8 Great Tool for Monitoring your PC (Made by CPUID) Download Now!!

**cpuz** · 12-09-2007, 05:40 AM

Originally Posted by mascaras

with HD3800 Crossfire only read 1 temp
regards

Yes I'm not surprised, I never really tested on a CF platform.
Could you please save two dumps, one with cpuz and one with hwmonitor, and send them to me ?
Thanks

**cpuz** · 12-09-2007, 05:41 AM

Originally Posted by SparkyJJO

Not entirely sure what TMPIN2 is reading but I sure hope nothing is at 128C

It is fixed.
Thanks

**rogard** · 12-09-2007, 08:33 AM

I wish I could minimize it to the system tray with the temps displayed there.

**ANP !!!** · 12-09-2007, 09:47 AM

Thank you OP for Posting

..

And many things to CPUz for making a great software.

**Millyons** · 12-09-2007, 11:37 AM

ok i have still been finding ways to use MBM even now on p5b, ga p35-ds3p but i would love to have an alternative ......

this app with all info in one window, showing what we choose in the system tray and loging like mbm has low/high/avg that would own since we really need a nice light app with couple of those options and not have to bother with manifacturer bloatware or in my case spending days configuring mother board monitor on every new mobo i get

**cpuz** · 12-10-2007, 01:27 AM

I note all your requests guys.
The program will evolve. Monitoring is something new for me, so the program needs some tuning, and some GUI change to be more convenient.
Thanks for all your kind words tho, it really encourages me.

**TSXmike** · 12-10-2007, 04:14 AM

i like...

but... AUX1...

**VIctorj** · 12-10-2007, 05:17 AM

Temps showed on taskbar would be great, and if OSD is added to the pack it will totally own.

**Den Leiw** · 12-10-2007, 05:53 AM

Very nice program and only uses 5,5 MB of RAM for me
Easier to use than Everest, thanks big time

**r4st4m4n** · 12-10-2007, 06:49 AM

I think there is an offset of +15°C for cores temp for my E4300. Screenshot taken idle:

I doubt the temps are 40+ while idle

**nullface** · 12-10-2007, 06:59 AM

Originally Posted by Gig4moller

Voltages are way off here too (atleast the 12 and 5v ones)

Mine too, +12v reads as 7v

**Chewbenator** · 12-10-2007, 07:15 AM

Voltages a bit off, but CPU and GPU temps agree with CoreTemp/TAT and ATI CCC. Also, the CPU voltage is correct.

**Prodigys** · 12-10-2007, 08:06 AM

Just works great here with Vista X64 even ...

.

**marauder16** · 12-10-2007, 09:13 AM

hm, voltages 'a bit' off, but it's good

**iddqd** · 12-10-2007, 10:04 AM

Originally Posted by SKYMTL

Oh no. Not more people thinking a software program will give them accurate voltage readings.

Well, it's theoretically possible.

**Flinch** · 12-10-2007, 06:07 PM

Very nice, keep up the good work.

Would be great to see the temps in the toolbar.

**cpuz** · 12-11-2007, 01:43 AM

>marauder16, TSXmike and nullface
Can you save a dump and send it to me please ?

>Chewbenator
I got your dump, it is fixed.

>r4st4m4n
Yes you're right, you can remove 15 degrees. This is fixed.

You can get the updated version here :
http://www.cpuid.com/download/beta/HWMonitor.zip

Please don't hesitate if you notice anything wrong.

**cantankerous** · 12-11-2007, 02:30 AM

I am really liking this program. Such a small utility with a very plain interface, but gives everything you need in one app. Just a question. My 8800 Ultra shows its core temp but what about ambient and fan speed? Just an idea if you wish to include this info in an update. Thanks again.

**marauder16** · 12-11-2007, 06:42 AM

@cpuz: you've got PM

**Rock&Roll** · 12-11-2007, 08:48 AM

Love this program. It works flawlessly in Vista x64. All readings are correct for my rig.

**cantankerous** · 12-11-2007, 10:37 AM

Another thing to mention. The PWM and NB temps seem reversed on my DFI Lanparty UT P35 when compared to Everest or Smart Guardian.

**HamidFULL** · 12-11-2007, 01:08 PM

First post updated to v1.0.5.9

**Millyons** · 12-11-2007, 03:26 PM

the fans on the gigabyte-p35 are totaly correct yet, fanin2 is about 300 where it should be 1200 ish, cpuz do you need another dump for that?

oh and is it possible to make the voltages like in CPU-Z with 3 decimal instead of just 2

as in right now 1.25v in this while cpu-z is 1.248 (i know its close i just like the way cpu-z shows it better)

**cpuz** · 12-11-2007, 03:33 PM

Originally Posted by Millyons

the fans on the gigabyte-p35 are totaly correct yet, fanin2 is about 300 where it should be 1200 ish, cpuz do you need another dump for that?

Yes please.

**Millyons** · 12-12-2007, 03:12 AM

mail sent....... just a comment on here also

Gigabyte P35-DS3P - IT87* all ok except fans, OS win 2003 server enterprise
Asus M2A-VM - IT87* - all temps, voltages ok but i dont have any fans in that computer - OS win 2003 server std
Intel DQ965GF - showing as uGuru - CPU and HDD ok, OS Vista 32bit

I have also a Ati x1800xt on the Gigabyte machine and it is only showing core temp while it has the ambient temp sensor also

when i have time ill try attaching all fans to both the Ga and Asus to make sure that they are all ok, just no time right now

Thread: HWMonitor v1.0.5.8 Great Tool for Monitoring your PC (Made by CPUID) Download Now!!

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions