DI = Dry Ice
2.6V should be to much anyway for 24/7 and DDR2Originally Posted by truehighroller
DI = Dry Ice
2.6V should be to much anyway for 24/7 and DDR2
Last edited by mAlkAv!An; 09-23-2008 at 05:22 AM.
Oh, thank you, well is it safe to use 2.6~v with my spot cool for 24/7?
_____________________________________________
Rig = GA-P67A-UD3P Rev 1.0 - 2600K @ 5.2~GHz 1.5v~, 1.489~v Under Load - Swiftech Water Cooling - 2 X 4GB Corsair DDR3 2000Mhz @ 1868MHz~ 9,10,9,27 @ 1.65v~ - Asus 6970 @ 950MHz / 1450MHz - 3x Western Digital RE3 320Gb 16Mb Cache SataII Drives in Raid0 - Corsair HX 850w Power Supply - Antec 1200 Case - 3DMark 11 Score = P6234 - 3DVantage Score = P26237
Ok, my mistake
With was at CryptiK asking whether I used spreaders.
Truehighroller, I wouldn't suggest more than 2.2v max for 24/7 regardless of cooling
Oh, and DI is dry ice.
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
You want to use 2.6v 24/7? If so, no way, no cooling is good enough for that. 2.4v max 24/7 with good aircooling (eg: 80 CFM 120mm fan) and 2.2v is the top end of what I would run 24/7 with good aircooling (and I would expect ~2 years lifespan at 2.2v), I prefer the 1.95 - 2.05v level.
Cheers for that, J-max OC is a ram clocking legend. I also attempted to remove my TG 8500's heatspreader, I got one side off easy, but the other side would have had to be heated with a hairdryer and I don't want to go down that path quite yet, so I put them back together.With. I've destroyed three sticks of BH-5 removing spreaders
I used DI for cooling.
Original French Link
Google Translated
LN2 cooling, P35 so no CAS/Memset bug
Last edited by CryptiK; 09-23-2008 at 06:09 AM.
Ci7 990X::Rampage III Extreme::12GB Corsair Dominator 1866C7GT::2 x EVGA SC Titans in SLI::Corsair AX1200::TJ07::Watercooled
Ci7 920 3849B018::Rampage II Extreme::6GB GSKILL Trident 2000C9 BBSE::EVGA GTX580::Antec Signature SG850::TJ09::Aircooled w/TRUE 120X
Thank you guys,
_____________________________________________
Rig = GA-P67A-UD3P Rev 1.0 - 2600K @ 5.2~GHz 1.5v~, 1.489~v Under Load - Swiftech Water Cooling - 2 X 4GB Corsair DDR3 2000Mhz @ 1868MHz~ 9,10,9,27 @ 1.65v~ - Asus 6970 @ 950MHz / 1450MHz - 3x Western Digital RE3 320Gb 16Mb Cache SataII Drives in Raid0 - Corsair HX 850w Power Supply - Antec 1200 Case - 3DMark 11 Score = P6234 - 3DVantage Score = P26237
I froze mine in the freezer
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
LMAO, it might have some condensation I bet..I froze mine in the freezer
_____________________________________________
Rig = GA-P67A-UD3P Rev 1.0 - 2600K @ 5.2~GHz 1.5v~, 1.489~v Under Load - Swiftech Water Cooling - 2 X 4GB Corsair DDR3 2000Mhz @ 1868MHz~ 9,10,9,27 @ 1.65v~ - Asus 6970 @ 950MHz / 1450MHz - 3x Western Digital RE3 320Gb 16Mb Cache SataII Drives in Raid0 - Corsair HX 850w Power Supply - Antec 1200 Case - 3DMark 11 Score = P6234 - 3DVantage Score = P26237
I mean to froze them to get the heatspreaders off.
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
It works again
One fairly long BIOS clear later and I could boot again, so straight back up to 2.46v real and I got his quickly:
Validation - 504MHz C3Well I did one better than a photo, I got the validation again. Boot from 490MHz 3-3-3-9 2.45v and SetFSB up.Very strange. I'll take a photo tonight
The new validation, correct this time
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Here's another Run with my OCZ Reaper PC6400
Boot up at Cl3-3-3-8
Vdimm=2.73
managed on an Asus P5N-D 750i
For some reason my Corsair Dominator PC2-9136's can't do CL3. I tried 800MHz @ 3-3-3-9 W/ 2.46v and wouldn't boot.
Even my cheap TG 5300 can do DDR2-850 CL3 with 2,45v for 1M, maybe NB voltage was too low?
On the other hand your sticks are very good with CL5, some sticks are just made for high MHz, and some for low MHz with tight timings.
![](http://www.hwbot.org/signature/u15466.png height="110" )
Yeah that what I was thinking cause I easy hit 1333MHz 6-6-6-18 (yeah i know CL6 isn't good) with only 2.36v. Also I'v tried high NB volts etc.
My old dead Dominator ram did 900MHz 3-3-3-9 W/ 2.56v.
Last edited by fatguy1992; 11-19-2008 at 11:13 AM.
DAMN! i wish i had discovered this thread b4 i sold my p45 ds3l.
i was running these kingston sticks at 4-4-4-5 at ddr2 1020, with 2.2V, i bet i could have pushed farther.
As Los Alamos director J. Robert Oppenheimer watched the demonstration, he later said that a line from the Hindu scripture the Bhagavad Gita came to mind:
"I am become Death, the destroyer of worlds."
Test director Kenneth Bainbridge in turn said to Oppenheimer, "Now we are all sons of b**ches." wiki
Wrong CAS latencyYou need to be running 3-x-x-x
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Sorry 2 join in, but I think he meant since they could easy do 1020MHz 4-4-4-5 he could push them 2 1000MHz 3-3-3-9 etc.
I find a lot of RAM can do 1066MHz 4-4-4-x stable at very low voltages but very few can do 1000MHz 3-3-3-x stable on air cooling.
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
May we (Moonman & myself) offer some competition to Nanok - 565.8MHz CL3-3-3-10 Pi1M on P35 on plain & mediocre (even sub-par) Ballistix Tracer PC6400:
http://www.xtremesystems.org/forums/...21&postcount=8
EK Water Blocks R&D
ekwb.com
Hobby: Rotary SS bench unit (LPG/R-507) | -75°C Auto-cascade (R-600/R-290/R-744) | Plate HX water chiller (1kW cooling power) | My 2nd cascade MP14FB R-507/R-1150 | Mini cascade R-507/R-1150 | GPU single-stage | Mach I restoration mod -> -38°C @ 230W
Milestones: 7.12GHz P4 | 6.84GHz K10.5 | 6.45GHz Ci5 | 3.31GHz K7
3DMark2001SE -> Favourite Game!
GoodRAM PRO 900 - HJ-M1, D9GKX 8. stepping
500.025
http://valid.canardpc.com/show_oc.php?id=854624
3.15V
I think it's the only GoodRAM in CAS 500+
mobo: Commando
EDIT:
and one more
http://valid.canardpc.com/show_oc.php?id=886562
Kingston HyperX 1200MHz @ D9GKX 6WD22
513MHz @ 3-3-3-8 @ 3.05V
Last edited by JULO; 12-16-2009 at 12:02 PM.
sorry for my poor english skill
Phenom X4 00 TWKR @ 4.0GHz | MSI 790FX-GD70 | HD4850 @ 800MHz
Posting Permissions
Reply With Quote
Bookmarks