Printable View
Hey Guys,
This is my first build log. See my sig for hardware that I am using. I had completred this computer but decided to stripe it down and take my time building it back up exactly how I wanted it in the first place. These photos show a before shot and the computer striped down ready for rebuilting. The chassis will sent to the powder coaters for a matt black finish and the grey plastic shrouds will be sent to a local body shop for a black mirror finish.
While these case is away I started sleeving cables and adding coiling to the tubing between CPU-NB-SB-MVR.. I had a fair bit of trouble with kinky with this koolance tubing. I would move to something like tygon but a spent a fair bit of money on these koolance compression fittings and they will not fit tygon tubing because of its greater wall thickness.
awesome plans man. looks like an amazing build. cant wait to see the end product. and definitely update us with pics. good luck!
Love your neat work area, and looks like you're really paying attention to the details... bet it will turn out great.
i have the same case,cpu and gpu.great ideeea,but its a problem,with your tubing,betwen mosfet and mosfet,make to long tubes,try to cut,and put a little tub,if is possible.
what tubing do you have?tygon or what?
http://www.abload.de/img/dscf0989nm8o.jpg
Funny thing about reading, its really enjoyable and educating. anywho...Quote:
Originally Posted by mit78
he stated that he would have liked to have gotten Tygon but the compression fittings he wanted to use wont work with it... so hes stuck with koolance tubing which he finds kinks easily (what a surprise).
Hey mate,Quote:
Originally Posted by mit78
The photo shown was a shot I took half way through adding the tube coiling, I will add some photos of the finished product. I also picked up the black shrouds from the bodyshop today and I must say that they turned out awesome, it is an even better finish then I expected. The painter said the paint should be fairly durable because it was baked and that it will come up even shiner with some car wax. I will post some photos as soon as possible. Now just awaiting the chassis from powder coating..
Cheers.
wow
thats pretty long tubing from block to block....is it only for showing the loop ? or you intend to use them that long between blocks ?
agree with shazza, love all the parts detail :)
keep it coming
Some photos of the shrouds. Excuse the dust they had been sitting at the body shop all day I will get around to give them a wax soon. My photography skills do not do the paint finish any justice.
and some more.
how come you didnt just try painting it yourself?
I wanted a mirror finish on the shrouds to stand out from the matt black chassis. I have found in the past that it is not possible to get a high quality finish with a can of spray paint and I dont really have the equipment to do it at home. The paint they used was automotive paint that was baked on which should give it a harder surface.Quote:
Originally Posted by NameTaken45
Cheers
That's one long loop you go there! What type of pump do you have driving that?
Looks good so far though!
The long loop is from my old build, they will be replaced on this one. I did not have tube coil when I first put it together so the tubes could not be to short or they would kinky. See my sig for type of pump..Quote:
Originally Posted by snipper_cr
Cheers
beautifull,you have koolance tubing?some temperatures for us?
I got the case back from powder coating yesterday. Excuse the fingerprints. Just a tip, if you get your case powder coated have a tap handy to remove excess coating from treads.
Murdered out. What do you think. It badly needs a clean..
Nice! I really like it all in black.
Very shexy
~Bex
wow nice color.
All black looks very sexy.
good stuff man... I got my Cosmos S chassis painted black but left everything else but now im regretting it :p: good job though keep up the great work
great work! How much did the painting run ya?
The paint on the shrouds was AUD$110 & it was AUD$75 for the powdercoating. Sorry about the delays I am waiting for 5 new Yate Loon 120mm High Speed Fan (D12SH-12) and a new 1000W Real Power Pro Coolermaster Modular power supply. I have got a 850W Real Power Pro Power supply but it is not modular and I find it hard to secure the right side panel when all of the wires are routed through there.Quote:
Originally Posted by sniperbob
Just a quick update, I had a couple of days free to work on my build so I made the most of my time since I had 90% of the parts I needed. Sorry for the lack of photos as I did not have my camera on me at the time. These photos were taken of an iphone so excuse the quility.
Cheers