New 146 World Record!

Printable View

01-22-2006, 04:38 PM
KoNiaK

1 Attachment(s)

Opteron 146 World Record! New WR 3753MHz quent

New WR 3813MHz Serbian XtremeOC Team :toast:
http://www.xtremesystems.org/forums/...ad.php?t=88784

New WR 3753MHz quent :toast:
http://www.xtremesystems.org/forums/...6&postcount=24

--------------
This is my first WR :woot:

I'll be back in a few days to give more details; don't have much time right now.
It will probably be broken within a few days so I wanted it published now :rolleyes:

http://www.xtremesystems.org/forums/...1&d=1137976690

http://valid.x86-secret.com/show_oc?id=66103

EDIT: Details:

Cooling: Promie
Stepping: 46 0540 CABYE FPBW
Chip: around -10C
Sweet point: Around 1.6v

I had to raise voltage that high to reach -10c; sweet point is around 1.6v can't remember what voltage I set in bios. Does it have any impotance?

This chip is amasingly hot, won't even pass OCCT @2100MHz 1.36v IHS is real bad on this stepping.

I couldn't answer because I was in the process moving accross the Athlantic for a while. I let my phase change in europe, so I won't improve it any soon. I had to do this real quick, that is why I didn't bench at all. Didn't try any other bios or tweaks to go higher. I Got this chip from someone I know in a small german store. Just before l had to leave :rolleyes:
01-22-2006, 04:39 PM
kiwi

DICE?

Nice clock, 0.05Mhz more than my best Venice :D

:toast:
01-22-2006, 04:45 PM
KoNiaK

Quote:

Originally Posted by kiwi

DICE?

Nice clock, 0.05Mhz more than my best Venice :D

:toast:

Chip temperature was around -10°C :D
01-22-2006, 05:33 PM
Mean Machine

Holy fudge muffins. What kind of cooling/stepping/voltage? ;)
Ofc I see the CPU-Z reading, but what'd you set in BIOS? 1.8V, I assume. But the cooling and the stepping would be real fun to find out.

That was reall impressive, I gotta say. Thumbs up, and congrats.
01-22-2006, 05:51 PM
feizaionly

Nice results.congrats!!!!
wait for your detail
01-22-2006, 06:05 PM
[XC] moddolicous

Nice results. My guess: Air cooling or waterchilling. -10c is pretty low warm for DI. Probably 1.8v in bios. Can we see 3.8 soon?
01-22-2006, 06:16 PM
afireinside

Just when I thought SS was going away... Any benchies at all?
01-22-2006, 11:35 PM
CRUSH-ER

Yeah down with SS's only. If you want to post a SS and then benches at slightly less speed, that's more like it. :)

Congrats either way though. :toast:
01-22-2006, 11:39 PM
Ozan Baseski

A very good 146 I must say. What kind of cooling did you use and what is the stepping of your opteron?
01-22-2006, 11:53 PM
kiwi

Quote:

Originally Posted by moddolicous

Nice results. My guess: Air cooling or waterchilling. -10c is pretty low warm for DI. Probably 1.8v in bios. Can we see 3.8 soon?

-10C under DICE is still possible with a crappy container, hot chip, high volts and @ load :D
01-23-2006, 12:10 AM
Coroner Kyle

What cooler are you using? And the stepping? Please...
01-23-2006, 12:12 AM
s7e9h3n

Quote:

Originally Posted by afireinside

Just when I thought SS was going away... Any benchies at all?

This one's just for you :p: :toast:
http://img394.imageshack.us/img394/4865/cpu37237yp.jpg
01-23-2006, 12:15 AM
Serge84

Nice OC! :toast:
01-23-2006, 02:28 AM
G H Z

Quote:

Originally Posted by s7e9h3n

This one's just for you :p:

LOL :D
01-23-2006, 02:53 AM
Godmaster

Very nice oc;)
01-23-2006, 03:05 AM
kiwi

s7e9h3n

Did you get validation at that speed and above or is it still not working? 1.9V lol
01-23-2006, 03:13 AM
s7e9h3n

Quote:

Originally Posted by kiwi

s7e9h3n

Did you get validation at that speed and above or is it still not working? 1.9V lol

http://img476.imageshack.us/img476/7...wwrcpuz0wm.jpg

http://img223.imageshack.us/img223/3793/3600a1te.jpg

:toast:
01-23-2006, 03:59 AM
Waus-mod

@ steph..... LOL! haha

@ afi.. what is so worse about an WR validation.. i mean we all see higher bencheble rigs, so a 146 cant compete but still can give a WR.. so he made it and can always run a 1m :)

i like it
01-23-2006, 08:49 AM
Kappy

hehe sweet ;)
01-24-2006, 10:44 AM
SoF

I think every opteron >3.7GHZ is really worth a topic even it's only a ss.
this is some great oc - congratulations.
almost 300MHZ more than my one :( I feel slow as always when I'm seeing daily results here, hehe ;)
01-24-2006, 10:49 AM
RiceLover

Very Nice:D
01-24-2006, 11:41 AM
boblemagnifique

Very Nice for First WR :)

Stepping please ? :)
01-24-2006, 11:51 AM
UTF Nightmare

Nice result but tell us cooling/voltage :p:
01-25-2006, 12:42 PM
quent

Hello, new WR by me.

http://valid.x86-secret.com/show_oc?id=66765

Opteron 146 0540 CABYE FPBW under single phase ( proc arround -15° )

http://valid.x86-secret.com/cache/66765.png

Regards.

Quent, Overclocking-masters.com
01-25-2006, 12:44 PM
starostise

Quote:

Originally Posted by quent

Hello, new WR by me.

http://valid.x86-secret.com/show_oc?id=66765

Opteron 146 0540 CABYE FPBW under single phase ( proc arround -15° )

http://valid.x86-secret.com/cache/66765.png

Regards.

Quent, Overclocking-masters.com

:woot: :clap: my friend
01-25-2006, 12:46 PM
quent

TY, :)

Regards

Quent.
01-25-2006, 12:48 PM
bachus_anonym

@KoNiaK and quent,

Can you guys see how high are those Optys benchable? Are those 1M-benchable @ 3.6Ghz or higher? Any other benches, please? :)
01-25-2006, 12:50 PM
quent

Quote:

Originally Posted by bachus_anonym

@KoNiaK and quent,

Can you guys see how high are those Optys benchable? Are those 1M-benchable @ 3.6Ghz or higher? Any other benches, please? :)

hi, i have to fix the single phase before testing.

Not benchable @ 3.6ghz 4 the moment :(
01-25-2006, 02:41 PM
misteroadster

great dude !! :toast:

27th WR for OCM :D
01-25-2006, 03:00 PM
njkid32

WOW someone finally took my WR down.. Good job! Any benches?
01-25-2006, 10:45 PM
quent

Comin' soon :)
01-26-2006, 08:44 AM
steelballzz

i was wondering how many volts did u throw at the sucka....
the one i tested gave 3511 SS with 1,82vcore.....
maybe next time i will increase it a bit:D

edit....btw....great score
01-27-2006, 06:47 AM
Celcius

Congrats on your first WR...very nice OC!:toast:
01-28-2006, 04:23 PM
quent

I'm gonna broke 3800mhz soon, puting the single phase outdoor with -10°, I hope -30°C CPU :)

3757 = -15°C CPU.
01-28-2006, 05:56 PM
lemonlime

Very nice clock! I can't break 3.4 on my 148 even at 1.8V :D
01-28-2006, 10:11 PM
SoF

Quote:

Originally Posted by quent

Hello, new WR by me.

http://valid.x86-secret.com/show_oc?id=66765

Opteron 146 0540 CABYE FPBW under single phase ( proc arround -15° )

http://valid.x86-secret.com/cache/66765.png

Regards.

Quent, Overclocking-masters.com

:eek: :eek: :eek: :eek: :eek:

:woot: :woot:

IMPRESSIVE
01-28-2006, 11:23 PM
G3n3R@1

very very nice clocks, lets see some 3.8
01-28-2006, 11:29 PM
quent

Thanks :)

I'll breake 3.8g whitout any problem with the single phase fixed.

-10°C <=> +70Mhz

I broke 3753Mhz with proc @ -15C, with -25 or -30 ( ambiant temp at -/+ -10°C ) i could hope 3850Mhz :rolleyes:
01-29-2006, 03:24 AM
before

Let's see Quent :D Awesome chip indeed!
01-29-2006, 08:43 AM
Brettbeck

Quote:

Originally Posted by s7e9h3n

http://img223.imageshack.us/img223/3793/3600a1te.jpg
:toast:

Sorry for this off-topic question, but what piece of software is that you are using to monitor temps/voltages?

Thanks:).
01-29-2006, 08:47 AM
igor0203

That's MBM (Motherboard Monitor) ;)
01-29-2006, 08:48 AM
Revv23

pretty sure that MBM.
01-29-2006, 09:17 AM
Brettbeck

Oh right, thanks guys. I've used MBM before but never remembered it looking like that.
01-29-2006, 12:38 PM
s7e9h3n

Quote:

Originally Posted by Brett

Oh right, thanks guys. I've used MBM before but never remembered it looking like that.

That's the "dashboard" of MBM5 ;)
01-29-2006, 01:30 PM
KoNiaK

Quote:

Originally Posted by moddolicous

Nice results. My guess: Air cooling or waterchilling. -10c is pretty low warm for DI. Probably 1.8v in bios. Can we see 3.8 soon?

Cooling: Promie
Stepping: 46 0540 CABYE FPBW
Chip: around -10C
Sweet point: Around 1.6v

I had to raise voltage that high to reach -10c; sweet point is around 1.6v can't remember what voltage I set in bios. Does it have any impotance?

This chip is amasingly hot, won't even pass OCCT @2100MHz 1.36v IHS is real bad on this stepping.

I couldn't answer because I was in the process moving accross the Athlantic for a while. I let my phase change in europe, so I won't improve it any soon. I had to do this real quick, that is why I didn't bench at all. Didn't try any other bios or tweaks to go higher. I Got this chip from someone I know in a small german store. Just before l had to leave :rolleyes:
01-29-2006, 01:35 PM
KoNiaK

Quote:

Originally Posted by s7e9h3n

This one's just for you :p: :toast:
http://img394.imageshack.us/img394/4865/cpu37237yp.jpg

Amasing your venice accept -48C mine won't show any improvment under -20/-25C

IHS on or off?

Quote:

Originally Posted by SoF

I think every opteron >3.7GHZ is really worth a topic even it's only a ss.
this is some great oc - congratulations.
almost 300MHZ more than my one :( I feel slow as always when I'm seeing daily results here, hehe ;)

Thanks. What's worth a thread isn't easy to define.

If I post in one of those big thread I won't be able to folow it and answer questions. So I prefer to create a new thread, sorry every body!
But I always answer sooner or later, which isn't the case of every body. I think it to be really important to help each other improving our scores.
01-29-2006, 01:37 PM
KoNiaK

Quote:

Originally Posted by quent

Hello, new WR by me.

http://valid.x86-secret.com/show_oc?id=66765

Opteron 146 0540 CABYE FPBW under single phase ( proc arround -15° )

http://valid.x86-secret.com/cache/66765.png

Regards.

Quent, Overclocking-masters.com

:woot: I knew it gad to be broke soon :D
Glad to see it coming from overclockins-masters; keep the good overclocking guys :toast: I was a member once but can't remember you :confused:

Unfortunatly I won't be able to compete due to the reasons I explained before.

How can you be so sure that your opty can accept lower temperatures?
01-29-2006, 02:09 PM
quent

Quote:

Originally Posted by KoNiaK

:woot: I knew it gad to be broke soon :D
Glad to see it coming from overclockins-masters; keep the good overclocking guys :toast: I was a member once but can't remember you :confused:

Unfortunatly I won't be able to compete due to the reasons I explained before.

How can you be so sure that your opty can accept lower temperatures?

I banned you ( for 2 days.. :D ) because of a thread "o/c my penis" :rolleyes: , you may come back mister ! ;)

This stepping don't coldbug harsh, and he loves cold. I'm sure he'll accept -25 without any problem.

edit : u made a mistake : New WR by quent: "3"753MHz :D
01-29-2006, 02:31 PM
KoNiaK

What!!! I never created such tread! You must be wrong; you weren't on the forum when I was :rolleyes:

Well my won't progress below -10 will see if I got the bad appple :/

Gona correct this sorrry
01-29-2006, 02:41 PM
quent

Oh, sorry i probably made a mistake. :D
01-29-2006, 02:53 PM
s7e9h3n

Quote:

Originally Posted by KoNiaK

Amasing your venice accept -48C mine won't show any improvment under -20/-25C

IHS on or off?

On :)
01-29-2006, 03:00 PM
HARDCORECLOCKER

Quote:

Originally Posted by quent

I banned you ( for 2 days.. :D ) because of a thread "o/c my penis" :rolleyes: , you may come back mister ! ;)

This stepping don't coldbug harsh, and he loves cold. I'm sure he'll accept -25 without any problem.

edit : u made a mistake : New WR by quent: "3"753MHz :D

:confused: Why not OC a penis........, reason to be banned??? :p:

:toast:
01-29-2006, 03:15 PM
KoNiaK

Quote:

Originally Posted by s7e9h3n

On :)

So there is really no point to remove them on venice.
01-29-2006, 03:27 PM
s7e9h3n

Quote:

Originally Posted by KoNiaK

So there is really no point to remove them on venice.

Only if you can't get cold enough ;)
01-31-2006, 03:21 AM
Hazzan

Congcrat !! nice result
01-31-2006, 04:24 AM
KoNiaK

Quote:

Originally Posted by s7e9h3n

Only if you can't get cold enough ;)

It isn't easy to know when you only have single stage cooling :/
I thought my venice might accept lower temparature, I uncaped it and killed it :D
http://www.xtremesystems.org/forums/...ad.php?t=86179
02-28-2006, 11:26 AM
masni

guys, i think the WR on opteron 146 comes from Serbia...

over 3800mhz on dry ice...
02-28-2006, 12:51 PM
Bennah

KoNiaK and quent,

Great work to both of you guys. Sterling job.

Hoping to see some friendly competition going on. KoNiaK, you gunner try and take back the WR ?
02-28-2006, 01:55 PM
quent

I reach 3806Mhz today.
http://valid.x86-secret.com/show_oc?id=75282

The validation for 3814Mhz ( WR ) is corrupt !!!
03-01-2006, 02:55 AM
Bennah

:toast: Nice work...

Shame about the validation for 3814MHz though :( All the MHz you can get is a bonus.

Time to change the sig then or havnt you finished :slobber:
03-03-2006, 01:54 PM
before

Quote:

Originally Posted by quent

I reach 3806Mhz today.
http://valid.x86-secret.com/show_oc?id=75282

The validation for 3814Mhz ( WR ) is corrupt !!!

Nicely done my friend :toast:
03-03-2006, 03:15 PM
kiwi

Lol post edited and now I look like a noob asking 1st question :slap: :p:
03-04-2006, 03:02 AM
v0dka

Wow congrats on the monster clock.

Those CABYE 0540 surely are great.
03-04-2006, 08:01 AM
KoNiaK

Quote:

Originally Posted by masni

guys, i think the WR on opteron 146 comes from Serbia...

over 3800mhz on dry ice...

Yes, it is! I didn’t update the thread for a while; didn’t think it would be bumped again anytime soon since the new WR is in another thread. I’ll do it right away!

Quote:

Originally Posted by Bennah

KoNiaK and quent,

Great work to both of you guys. Sterling job.

Hoping to see some friendly competition going on. KoNiaK, you gunner try and take back the WR ?

I’d like to, but for the reasons explained in first post I can’t.

Quote:

Originally Posted by kiwi

Lol post edited and now I look like a noob asking 1st question :slap: :p:

It’s easier to read first post than the whole thread, that’s why I’ve done that.

Quote:

Originally Posted by quent

I reach 3806Mhz today.
http://valid.x86-secret.com/show_oc?id=75282

The validation for 3814Mhz ( WR ) is corrupt !!!

Real good, congrat!
What were core temps and voltage?
03-08-2006, 07:23 AM
quent

-30*C bios => -35 windows.
Vcore = 1.85v ( f*ckin' coldbug :D )

I'll try 3814 once again this WE.

And thank you..

:)
03-08-2006, 02:07 PM
before

Quote:

Originally Posted by quent

I'll try 3814 once again this WE.

I'd like to see that my friend :D

All times are GMT -8. The time now is 09:56 PM.

XtremeSystems