------6200@6600GT overclock!!!------

Printable View

06-16-2005, 01:02 AM
hwgeek

------6200@6600GT overclock!!!------

i have the GF 6200 128MB 128BIT PCIE by Gigabyte the TURBO FORCE edition 400/500
and i OC it to 550/700!! with no VMOD or extra cooling!!
after that i tweaked the 6200 in riva and now the 6200 is detected as 6600GT

http://img164.echo.cx/img164/9963/riva4fe.jpg

end now i have 6600GT!!
my pc :

A64 3000 @stock!!
512MB
K8NF-9
6200 turboforce 400/500

the card score is like real 6600GT and with no modding!!! or PC OCing!!

whar do u think?? is it the best score fo 6200 with no modding and PC OCing??

http://img164.echo.cx/img164/2064/550700gt0ch.jpg
06-16-2005, 01:17 AM
Athens[2004]

my gigabyte 6600gt does 4.5k~ 05 , , stock cooling 600~ 1300~ .

btw nice ovclock here. :)
06-16-2005, 01:39 AM
alexio

Nice dude :slobber:

Do you have any pics of the card and how much did it cost? Is there allso a AGP flavor? And where did you buy it?

Just like to know because of this:

http://www.xtremesystems.org/forums/...ad.php?t=65886
06-16-2005, 02:06 AM
hwgeek

Quote:

Originally Posted by alexio

Nice dude :slobber:

Do you have any pics of the card and how much did it cost? Is there allso a AGP flavor? And where did you buy it?

Just like to know because of this:

http://www.xtremesystems.org/forums/...ad.php?t=65886

this is the card 4NS memory chips! and i think there is AGP too
http://www.gigabyte.co.jp/nippon/nx6...+NX62128D_.jpg

NX62128DP!!- this us the Turbo force edition
and i'm from Israel and it coast me 125$
it has good cooling 70C @ load
06-16-2005, 03:09 AM
hwgeek

Quote:

Originally Posted by Troman

can you do 3Dmark1 en 03?also an arc03 run would be fine :)

http://img76.echo.cx/img76/1461/5500700gt8bw.jpg
http://img76.echo.cx/img76/7947/550700gt1ky.jpg
06-16-2005, 04:36 AM
zakelwe

The GT is 2ns 1000Mhz memory and so you do not quite have a GT, but it is certainly a lot cheaper than a GT so nice work.

The main problem with the unlocked 6200 series and 6600 series with 4ns or 3.6ns memory is lack of memory bandwidth unfortunately due to the 128 bit bus.

Regards
Andy
06-16-2005, 05:29 AM
sponge bob

nice OC anyway but those scoors are weak :D
06-16-2005, 10:24 AM
JasonE4

I got 6300 in 3dmark03 with my $62 xfx gf 6200 256 mb. That's at 450/600, but the core will be able to go much higher than that.
06-16-2005, 11:18 AM
cupra

that is HOT tweaked and oc, very nice results and like you say thet is xtreme performance for a 60$ ~

well done JasonE4 :toast:
06-16-2005, 07:41 PM
wedfighter

nice oc
but i believed there's still so much oc headroom for u
here's my 6600AGP w/ A 64 2800+ n 256MB generic RAM only :D
3D Mark 01
3D Mark 03
3D Mark 05
06-16-2005, 08:04 PM
LilGator

01 is a bit weak, but 03 and 05 seem very strong for the price. Very comparable to my 9800Pro OC'd ...
06-16-2005, 08:06 PM
Ackbar

Awesome scores! HWGeek, would you mind posting your bios for us to take a look at?

Thanks!
06-17-2005, 12:19 AM
sponge bob

Quote:

Originally Posted by Troman

show us youre scores ... ;)

hmm yes my old 9500 non pro 64mb did owned his 3Dmark2001 with almost 2K :D yet great scores..

lol, look @ 6200 OC thread. 8,4k @03 but im finishing my 9k rig with 6200
06-17-2005, 02:58 AM
hwgeek

Quote:

Originally Posted by Ackbar

Awesome scores! HWGeek, would you mind posting your bios for us to take a look at?

Thanks!

here is my bios
http://s21.yousendit.com/d.aspx?id=3...12Y46PISSQD8KQ

and remember that my scores are low because I can't OC my CPU!!! it is in stock!! 1.8GHZ

and you OCed the cpu too
so post your scores for 6200 without OCing your CPU!!
06-17-2005, 06:52 PM
wedfighter

Quote:

Originally Posted by LilGator

01 is a bit weak, but 03 and 05 seem very strong for the price. Very comparable to my 9800Pro OC'd ...

i'm not using 66.93 forceware yet
it's 76.50, so the score is rather low for the 3dm2k1
06-20-2005, 05:56 AM
hwgeek

I opened the temp tweak and now I can see the temp of the GPU
it's 61 in idle and 75 at load
is it ok? or not?
should I buy some extra cooling?
06-20-2005, 07:35 PM
wedfighter

Quote:

Originally Posted by hwgeek

I opened the temp tweak and now I can see the temp of the GPU
it's 61 in idle and 75 at load
is it ok? or not?
should I buy some extra cooling?

TT Giant III or Zalman VF700Cu will be a good choice for AGP
ArticCooling Rev 6 for PCIe
06-20-2005, 10:54 PM
zakelwe

Yes that is rather warm, if you start getting above 80 or so you might see the scores coming down.

It maybe that the heatsink is just not firmly on, some of these 6200/6600 heatsinks are not attached well at all. If it is firm then as above, one of those aftermarket coolers.

Regards

Andy
06-21-2005, 12:58 AM
El Snorro

I would like to try some 6200 oc action 2, just 4 fun :)

Would this card:
XFX GeForce 6200 128MB DDR TV DVI (PV-T44A-RAHX)

Chipset:
GeForce 6200
Memory:
128 MB
Bus Type:
AGP 8X
Memory Type:
DDR
Memory Bus:
64-bit
Output:
VGA and DVI
Highlighted Features:
TV Out

be suitable to mod to a 6600GT etc?
If so i'm gonna get myself one and see what i can do with it :banana:
06-21-2005, 09:41 AM
hwgeek

Quote:

Originally Posted by El Snorro

I would like to try some 6200 oc action 2, just 4 fun :)

Would this card:
XFX GeForce 6200 128MB DDR TV DVI (PV-T44A-RAHX)

Chipset:
GeForce 6200
Memory:
128 MB
Bus Type:
AGP 8X
Memory Type:
DDR
Memory Bus:
64-bit
Output:
VGA and DVI
Highlighted Features:
TV Out

be suitable to mod to a 6600GT etc?
If so i'm gonna get myself one and see what i can do with it :banana:

the memory is 64BIT!
you must take one with 128BIT!
06-21-2005, 10:13 AM
El Snorro

Quote:

Originally Posted by hwgeek

the memory is 64BIT!
you must take one with 128BIT!

Hmz are there any AGP 6200 with 128bits membus?
06-21-2005, 05:20 PM
wedfighter

Quote:

Originally Posted by El Snorro

Hmz are there any AGP 6200 with 128bits membus?

of course there's 128bit for 6200 AGP
n i dont even know if there's a 64bit 6200 except the TC version :)
just leave the 64bit go for 128bit 3.6ns or even 3.3ns
06-21-2005, 08:44 PM
Infected_enigma

I should get one, gets more points than my 9600xt =(
06-22-2005, 12:03 AM
El Snorro

Quote:

Originally Posted by wedfighter

of course there's 128bit for 6200 AGP
n i dont even know if there's a 64bit 6200 except the TC version :)
just leave the 64bit go for 128bit 3.6ns or even 3.3ns

I have bought an Asus 6200 GE (gamers edition)
http://www.asus.com/products.aspx?l1...18&modelmenu=1

Ram runs @275 (550 ddr) and the core runs @300mhz.
Hope i will get it soon and put some water cooling and vmods on it :banana:
06-22-2005, 08:06 PM
wedfighter

can't wait to see it :)
06-23-2005, 03:38 AM
El Snorro

Quote:

Originally Posted by wedfighter

can't wait to see it :)

it has some 3,6ns mem so that sounds quite good :)
06-24-2005, 05:57 AM
cmanisali2001

1 Attachment(s)

Cogn Bro :woot:

Could you help me İD moding my Leadtek A6200TD please...

http://www.xtremesystems.org/forums/...id=33038&stc=1

But Futuremark dosent see my card as 6600GT :confused:
ORB says 6200 :(
06-24-2005, 06:00 AM
JasonE4

Have you tried IDing it as a vanilla 6600? That's what I had to do with my 6200 and it showed up as a 6600 in everything just fine.
06-24-2005, 06:13 AM
cmanisali2001

1 Attachment(s)

Quote:

Originally Posted by JasonE4

Have you tried IDing it as a vanilla 6600? That's what I had to do with my 6200 and it showed up as a 6600 in everything just fine.

i tryied as a 6600 But it didnt work again... Could Someone Tell me What should i do exactly from the bigining ?

http://www.xtremesystems.org/forums/...id=33044&stc=1
06-24-2005, 06:31 AM
JasonE4

I'm pretty sure that you have to check the box to "Allow enabling hardware masked units". Also, you must restart after changing the ID. You'll probably have to reinstall the video drivers after restarting as well.
06-24-2005, 06:46 AM
cmanisali2001

1 Attachment(s)

1- First i removed Driver
2- then i selected Settings like this And accepted them

http://www.xtremesystems.org/forums/...id=33045&stc=1

3- i restarted My Comp

4- then i Setup Driver...

5- Restart again

6- i get sad when i see 6200 again :confused:
06-24-2005, 11:45 PM
El Snorro

:) :)
My asus 6200 will be here today :banana: :banana: :banana:
06-25-2005, 02:45 AM
blind_ripper

hope u have some fun whit it el snorro ;)
06-25-2005, 09:46 AM
Northwood

Quote:

Originally Posted by Troman

show us youre scores ... ;)

hmm yes my old 9500 non pro 64mb did owned his 3Dmark2001 with almost 2K :D yet great scores..

Do you have another name on this forum? maybe Geforce4Ti4200? :p:
06-25-2005, 10:31 AM
JDizzle

^lol

Now that you mention it, I haven't seen him around here in a while.
06-26-2005, 05:22 AM
El Snorro

damn my 2nd pipeline unit is broken :mad:
when i set it to 8x1,3 it artifacts (not really big, but the are there) in aquamark and 3mark.
Are there more people who's pipes were broken??

I just hate this :mad:
06-26-2005, 05:27 AM
JasonE4

Yes, there have been a few people who have been unable to open the disabled pipe.
06-26-2005, 05:37 AM
El Snorro

Quote:

Originally Posted by JasonE4

Yes, there have been a few people who have been unable to open the disabled pipe.

Well i'm not unable to open it, its just broken.
Maybe an other bios will fix this?
I'm gonna try that. :dammit:
06-27-2005, 04:15 AM
hwgeek

Quote:

Originally Posted by cmanisali2001

1- First i removed Driver
2- then i selected Settings like this And accepted them

3- i restarted My Comp

4- then i Setup Driver...

5- Restart again

6- i get sad when i see 6200 again :confused:

do this

1-install the drivers for 6200
2-restart
3-select in riva rhe 6600GT
4-then restart
5-and then u should get "New Hardware found"
6-and then install the drivers again
7-and restart
8-and finally it should be 6600GT
06-28-2005, 05:27 AM
JasonE4

Quote:

Originally Posted by El Snorro

Well i'm not unable to open it, its just broken.
Maybe an other bios will fix this?
I'm gonna try that. :dammit:

Unlikely. By "unable to open it", I mean, "unable to open it without artifacting". Let us know if the bios flash worked.
06-28-2005, 01:38 PM
cmanisali2001

Quote:

Originally Posted by hwgeek

do this

1-install the drivers for 6200
2-restart
3-select in riva rhe 6600GT
4-then restart
5-and then u should get "New Hardware found"
6-and then install the drivers again
7-and restart
8-and finally it should be 6600GT

Thanks a lot my Friend but...
İ did what you exaclty said.. but it didn't work...
which version of rivatuner did you used ?
i used v2.0 RC 15.5 ...
And What did you exactly did on riva tuner ?

http://img83.echo.cx/img83/9889/ss5rt.jpg

All times are GMT -8. The time now is 11:32 PM.

XtremeSystems