Bitspower Deep Red series fittings will be available soon

Currently Bitspower's fittings have 5 colors, True Silver, Silver Shining, Black Sparkle, Matte Black and True Brass/True Golden. Told directly by Bitspower's CEO Mr. "BP-Vincent" recently, another new series -- Deep Red will be available in late April. There will be Barbs, Compressions, Adapters, Quick Disconnects, Rotaries and more. The designs are completed, and the production will be started as soon as the test is done.



The boss didn't tell me about the price, but I think they'll remain the same price as other colors. I do like the red fittings since I own a Asus ROG MB... Hope I can see them before May on American market.

Did the boss give you any pics? ;)

Pics can be seen @ bitspower site. But you forgot to mentioned other new finish types, eg. carbon black, black diamond, and imho best looking of them all - bronze age.

Quote:

---

Originally Posted by churchy

Pics can be seen @ bitspower site. But you forgot to mentioned other new finish types, eg. carbon black, black diamond, and imho best looking of them all - bronze age.

---

Design of Bronze Age series, Black Diamond series and Carbon Black series has not finished, which means you won't see them soon. You may have to wait at least several months. Only red series is completed so far.

But yes, you're able to see them on their Taiwan website.

BTW, why do u think the bronze age is the best looking? IMO they look a little bit old. Looks like those fittings have been used for a very very long time. Red, Black, Silver, then Bronze... the silver was my favorite color, black is mine and the red will be my favorite color.

Blue?

Can I get in green :D

analysts: each has his own tastes. maybe because i like steam-punk builds a lot, where such should fit in well :)

Quote:

---

Originally Posted by nickbaldwin86

Can I get in green :D

---

Yes, you can. From Primochill.

Quote:

---

Originally Posted by analysts

Yes, you can. From Primochill.

---

pretty sure those are plastic, and not annodized green :shrug:

Quote:

---

Originally Posted by m0r7if3r

pretty sure those are plastic, and not annodized green :shrug:

---

do it yourself is the only way to get a metal green fitting
:ROTF::ROTF:

Quote:

---

Originally Posted by analysts

do it yourself is the only way to get a metal green fitting
:ROTF::ROTF:

---

Hehe, wonder if those places that do chroming for bikes and what not would do fittings...that'd be pretty sick

black sparkle is my choice :D

Quote:

---

Originally Posted by analysts

Yes, you can. From Primochill.

---

Never use that cr@p. Mine sheared on me after less than 24 hours use and drenched my entire build.

Quote:

---

Originally Posted by RacingTurtle

Never use that cr@p. Mine sheared on me after less than 24 hours use and drenched my entire build.

---

simply because plastic fitting cannot beat metal fitting
for plastic fitting I have to say that the o-ring isn't good

Deep red?
I thought they finally came up with a nicer red... but this is old news we have already seen red bitspower ;)
I think it's too shiny like red anodized aluminium :(
http://www.xtremesystems.org/forums/...141863&page=70
http://www.xtremesystems.org/forums/...d.php?t=264425

Quote:

---

Originally Posted by kroks

Deep red?
I thought they finally came up with a nicer red... but this is old news we have already seen red bitspower ;)
I think it's too shiny like red anodized aluminium :(
http://www.xtremesystems.org/forums/...141863&page=70
http://www.xtremesystems.org/forums/...d.php?t=264425

---

They are not that shiny.

http://img.photobucket.com/albums/v4...d/DSC03687.jpg

I will have to get some of these red fittings, I like very much:) Would look great on my classy.

Would love to see orange and purple.

Quote:

---

Originally Posted by kroks

Deep red?
I thought they finally came up with a nicer red... but this is old news we have already seen red bitspower ;)
I think it's too shiny like red anodized aluminium :(
http://www.xtremesystems.org/forums/...141863&page=70
http://www.xtremesystems.org/forums/...d.php?t=264425

---

If you think this is a piece of old news, then please show me a link that told us WHEN THEY WILL BE RELEASED!
Again, if you don't believe they are deep red, then please say sorry when they finally come to the market! :mad:

These might look spiffy with my EVGA Classified!

Barbs are already in retailers.;)

http://www.frozencpu.com/products/12...=c407s1029b145

http://www.frozencpu.com/products/12...=c407s1030b145

http://www.performance-pcs.com/catal...ducts_id=30066

http://www.performance-pcs.com/catal...ducts_id=30067

Dam those would have looked nice in my R3F build :z

i dunow... make brass fittings and than color them bronze??? am i miss something??? leave it brass and shave off some price... IMHO sell just brass fittings and let people pay for color they want...

Quote:

---

Originally Posted by Vetalar

i dunow... make brass fittings and than color them bronze??? am i miss something??? leave it brass and shave off some price... IMHO sell just brass fittings and let people pay for color they want...

---

getting fittings colored individually would be tremendously expensive. Plating them increases their usable life and makes them much more visually appealing for little cost increase (since they're able to plate them en mass)

http://www.bitspower.com.hk/catalog/...---------.html

Looks like they also have some nice stainless fittings too.

Oke i want, can a bp rep, contact me for a set of those red ones. i need about 30 fiittings, including straight ones, 45degrees, 90degrees, Q rotary adaptor, 1temp sensor stop, and stop fittings. all compression where capable.

when will these "carbon black" fittings be circulating the UK and i need a few red ones :D for my collection.

tbh tho, i think black sparkle is still the No. 1 favorite of most modders, with matt black in toe

Quote:

---

Originally Posted by m0r7if3r

getting fittings colored individually would be tremendously expensive. Plating them increases their usable life and makes them much more visually appealing for little cost increase (since they're able to plate them en mass)

---

till the plating flakes off in your loop. Happened with a couple of my bps matte black. that's why I went koolance and won't touch bps anymore.

Sent from my X10a using Tapatalk

Quote:

---

Originally Posted by MagisD

till the plating flakes off in your loop. Happened with a couple of my bps matte black. that's why I went koolance and won't touch bps anymore.

Sent from my X10a using Tapatalk

---

You're taking my post out of context. That post was in relation to them selling bare fittings which the end user then got plated to the color of their liking on their own...and you have to admit any plating is better than none.

Quote:

---

Originally Posted by m0r7if3r

You're taking my post out of context. That post was in relation to them selling bare fittings which the end user then got plated to the color of their liking on their own...and you have to admit any plating is better than none.

---

Ok semi out of context but I was commenting on bps mass plating efforts.

Sent from my X10a using Tapatalk

Quote:

---

Originally Posted by MagisD

Ok semi out of context but I was commenting on bps mass plating efforts.

Sent from my X10a using Tapatalk

---

Are you trying to say someone else plates them individually and still has competitive pricing? I'm in no way a fanboi (my most recent build used EK barbs cause I wanted to try em out :shrug:) but it seems as though you're putting something in a bad light. It sucks your barbs crapped out, but is this really the place to complain about that? :shakes: