-
Biostar TA890FXE fantastic 890FX Chipset
-
-
AMD Phenom II X2 555BE @ BIO-Unlocking X4 7028MHz
AMD Phenom II X2 555BE
CPU: AMD Phenom II X2 555BE
Mainboard : Biostar TA890FXE
RAM: G.SKILL DDR3 2Gx2 PC3-16000
VGA: Radeon HD 4350
Power: SAPPHIRE PURE 1250W
Cooler: GT LN2 POT
Case: CoolerMaster CL-001-KKN1-GP
OS: Microsoft Windows XP 32Bit
http://cfile26.uf.tistory.com/image/...4BC6694D98BA15
http://cfile28.uf.tistory.com/image/...4BC669509A807C
http://cfile29.uf.tistory.com/origin...4BC66956A01709
Callisto is the maximum clock X2 555BE.
http://valid.canardpc.com/show_oc.php?id=1134543
6958.1MHz
http://cfile26.uf.tistory.com/origin...4BC66958A3CFA0
Unlock, X4 7GHz
http://cfile23.uf.tistory.com/origin...4BC66957A12AE1
http://valid.canardpc.com/show_oc.php?id=1134551
7028.8MHz
555BE WR
-
AMD Phenom II X4 960T "X6 Unlocking" Biostar TA890FXE
http://cfile29.uf.tistory.com/image/...4BE2456708AB76
CPU: AMD Phenom II X4 960T @ X6 4GHz
Mainboard : Biostar TA890FXE
RAM: G.SKILL DDR3 1Gx2
VGA: ATI Radeon HD 4350
Power: SAPPHIRE PURE 1250W
Cooler: THERMOLAB BARAM 2010
Case: CoolerMaster CL-001-KKN1-GP
OS: Microsoft Windows7 64Bit
http://cfile4.uf.tistory.com/image/1...4BE4B08D5955CD
AMD Phenom II X4 960T
http://cfile6.uf.tistory.com/image/2...4BE4B08E5ADC17
AMD Phenom II X4 960T "Unlocking" X6
http://cfile22.uf.tistory.com/image/...4BE4B08E5B34FC
AMD Phenom II X4 960T "Unlocking" X6 @ 4GHz
1M Super PI
http://cfile27.uf.tistory.com/image/...4BE4B08F5C3722
AMD Phenom II X4 960T "Unlocking" X6 @ 4GHz
32M Super PI
http://cfile24.uf.tistory.com/image/...4BE4B0915E9218
AMD Phenom II X4 960T "Unlocking" X6 @ 4GHz
Memory Benchmark
http://cfile23.uf.tistory.com/image/...4BE4B0905DFFD5
AMD Phenom II X4 960T "Unlocking" X6 @ 4GHz
wPrime 32M / 1024M
http://cfile21.uf.tistory.com/image/...4BE4B0925F1CCB
AMD Phenom II X4 960T "Unlocking" X6 @ 4GHz
CINEBENCH R10
http://cfile8.uf.tistory.com/image/1...4BE4B09260895D
AMD Phenom II X4 960T "Unlocking" X6 @ 4GHz
CINEBENCH R11.5
"CINEBENCH" unlock cpu comes to a low score.
X4 unlock, six cores can not work properly. When compared with my 1090T ....
-
Biostar TA890FXE / 960T @ X6 6553MHz
CPU: AMD Phenom II X4 960T
Mainboard: Biostar TA890FXE
RAM: G.SKILL DDR3 1Gx2
VGA: SAPPHIRE ATI HD4350 256M
HDD: Samsung SSD 32G SLC
Power: SAPPHIRE PURE 1250W
Cooler: GT LN2 POT
Case: CoolerMaster CL-001-KKN1-GP
OS: Microsoft Windows Server 2008 R2
http://cfile5.uf.tistory.com/image/2...4BE837150DA7A7
http://cfile27.uf.tistory.com/image/...4BE837140B177D
http://cfile23.uf.tistory.com/image/...4BE837180FC8A7
[AMD Phenom II X4 960T + Biostar TA890FXE]
X6 All Cores 6173MHz
http://cfile25.uf.tistory.com/origin...4BE83711092164
[AMD Phenom II X4 960T + Biostar TA890FXE]
Best clock 6553MHz
http://valid.canardpc.com/show_oc.php?id=1178482
-
Biostar TA890FXE Voltage Test
http://cfile26.uf.tistory.com/image/...4BEBF86F05155E
CPU: AMD Phenom II X4 955BE
Mainboard: Biostar TA890FXE
RAM: G.SKILL DDR3 1Gx2
VGA: XFX ATI HD5850 BE 1G
HDD: Samsung SSD 32G SLC
Power: Power (NDA)
Cooler: THERMOLAB BARAM 2010
Case: CoolerMaster CL-001-KKN1-GP
OS: Microsoft Windows Server 2008 R2
http://cfile9.uf.tistory.com/image/1...4BEBF86F04643E
http://cfile26.uf.tistory.com/image/...4BEBF8740A490D
▲ cpu voltage 1.368v Test (IDLE)
http://cfile23.uf.tistory.com/image/...4BEBF87309863E
▲ cpu voltage 1.368v tested (full load)
http://cfile25.uf.tistory.com/image/...4BEBF871070F70
▲ cpu voltage 1.380v Test (IDLE)
http://cfile1.uf.tistory.com/image/1...4BEBF8720823F4
▲ cpu voltage 1.380v tested (full load)
http://www.youtube.com/watch?v=j2LwA...layer_embedded
http://www.youtube.com/watch?v=Ql3YX...eature=related
Stable voltage
No voltage fluctuation
-
AMD Phenom II X4 955 BE / Biostar TA890FXE
http://cfile7.uf.tistory.com/image/1...4BF21EC9302433
CPU: AMD Phenom II X4 955 BE
Mainboard: Biostar TA890FXE
RAM: G.SKILL DDR3 1Gx2
VGA: ATI HD4350
HDD: Samsung SSD 32G SLC
Power: Power (NDA)
Cooler: GT LN2 POT
Case: CoolerMaster CL-001-KKN1-GP
OS: Microsoft Windows Server 2008 R2
http://cfile23.uf.tistory.com/origin...4BF21EC82EDFEC
[AMD Phenom II X4 955 BE / Biostar TA890FXE]
7096.5MHz
http://valid.canardpc.com/show_oc.php?id=1193058
http://cfile26.uf.tistory.com/origin...4BF21EC82FD954
[AMD Phenom II X4 955 BE / Biostar TA890FXE]
7125.4MHz WR
http://valid.canardpc.com/show_oc.php?id=1192969
http://cfile7.uf.tistory.com/image/2...4BF21ECA31662A
http://cfile25.uf.tistory.com/image/...4BF21ECA32CEBE
-
http://cfile3.uf.tistory.com/image/1...4BF73D5FB25C6D
1090T 4.6G
1M Super PI
http://cfile2.uf.tistory.com/image/1...4BF73D5EB1F392
1090T 4.6G
CINEBENCH R11.5
cpu overclocked to a satisfactory outcome
But memory clock is not satisfied
They require effort on the memory clock
900MHz is difficult to reach:(
-
AMD Six Core 1090T @ 6831.27MHz / Biostar TA890FXE
http://cfile2.uf.tistory.com/image/1...4BE26C3E931355
CPU: AMD Phenom II X6 1090T BE
Mainboard: Biostar TA890FXE
RAM: G.SKILL DDR3 1Gx2
VGA: XFX ATI HD5850 BE 1G
HDD: Samsung SSD 32G SLC
Power: Power (NDA)
Cooler: GT LN2 POT
Case: CoolerMaster CL-001-KKN1-GP
OS: Microsoft Windows Server 2008 R2
http://cfile10.uf.tistory.com/image/...4BEED0209BA036
http://cfile2.uf.tistory.com/image/1...4BEED0219CEE57
http://cfile10.uf.tistory.com/origin...4BEED01E998030
AMD Phenom II X6 1090T BE @ 6804.1MHz
http://cfile21.uf.tistory.com/origin...4BEED01D97EE72
[AMD Phenom II X6 1090T BE / Biostar TA890FXE]
6804.4MHz
http://valid.canardpc.com/show_oc.php?id=1188056
http://cfile25.uf.tistory.com/origin...4BEED01E98890D
[AMD Phenom II X6 1090T BE / Biostar TA890FXE]
6831.27MHz
http://valid.canardpc.com/show_oc.php?id=1188103
http://cfile10.uf.tistory.com/origin...4BEED0239EB6AC
[AMD Phenom II X6 1090T BE / Biostar TA890FXE]
6500.2MHz
1M Super PI
http://cfile25.uf.tistory.com/origin...4BEED0239DA6AC
[AMD Phenom II X6 1090T BE / Biostar TA890FXE]
6375.2MHz
Pifast
-
Great results, great scores, all is GREAT!!!
I could only say bad words about my TA870+ mobo.
Worst BIOS i were ever seen.
When you unlock CPU some funcions in BIOS cause system down on powering button... When BioUNLOCKing is activatet than HT multiplayer, cpu VID, NB multiplayer are unavailable and system HANGS, no PCI-E frequency settings option, no AHCI drives settings option... Only thing you could move are "FSB" and Voltage settings. So i reach 245fsb x13.5=3310MHz, NB 2450MHz and HT 2450MHz (no HT multiplayer downing when unlocking)!!!
-
Quote:
Originally Posted by
zorz
Great results, great scores, all is GREAT!!!
I could only say bad words about my TA870+ mobo.
Worst BIOS i were ever seen.
When you unlock CPU some funcions in BIOS cause system down on powering button... When BioUNLOCKing is activatet than HT multiplayer, cpu VID, NB multiplayer are unavailable and system HANGS, no PCI-E frequency settings option, no AHCI drives settings option... Only thing you could move are "FSB" and Voltage settings. So i reach 245fsb x13.5=3310MHz, NB 2450MHz and HT 2450MHz (no HT multiplayer downing when unlocking)!!!
870 chipset, BIOS problem?:(
My experience of these other issues?
(Athlon II X3 425, Pehnom II X2 555 Unlock enabled 4 core.
But:
-HT link (X Multi) auto 10x, OK
-Multi manual 10x (2000), failed
-Multi-9x (1800), failed
- Multi 8x (1600), OK
-
Nice board GT:up:
I got the same board. Any new bios?
-
Quote:
Originally Posted by
Dumo
Nice board GT:up:
I got the same board. Any new bios?
The new BIOS is not yet.
Using 0506 bios:)
Biostar They're trying to improve memory performance:up:
-
Bro., I like your platform set up very much...always neat & tidy:up::up::up:
BTW, 960T for sale in Korea now ?
No 1090T & 960T here in Hong Kong...no nothing!:mad:
-
namegt: brilliant work !!! Did u try superpi 1M with great 955 BE superpi 1M.
And your 4600 MHz Cinebench run with 1090T, whats cooling? Thx.
-
-
Good compilation of all the game you have experienced ;)
-
How many power phases does this board have? I can't get that coz of huge heatsink. :shrug:
-
Quote:
Originally Posted by
amdsempron_xs
How many power phases does this board have? I can't get that coz of huge heatsink. :shrug:
TA890FXE
890FX+SB850
6 Phase(140W)
GT60
AMD Phenom II X6
SATA6Gbps
BIO-Unlocking
100% X.D.C
4 DDR3-1800(OC)
1394a
GbE
8Ch(ALC892)
//Con này được cái giá rẻ ở VN chừng 2m6
-
Nice results as always namegt! But I think CH IV F is better :p:
-
Quote:
Originally Posted by
Mad222
Bro., I like your platform set up very much...always neat & tidy:up::up::up:
BTW, 960T for sale in Korea now ?
No 1090T & 960T here in Hong Kong...no nothing!:mad:
Thanks Bro:D
1090T in Hong Kong do not have?:mad:
South Korea to the retail sales. But do not 960T
960T is a sample I have.:rolleyes:
Quote:
Originally Posted by
FlanK3r
namegt: brilliant work !!! Did u try superpi 1M with great 955 BE superpi 1M.
And your 4600 MHz Cinebench run with 1090T, whats cooling? Thx.
Quote:
Originally Posted by
richierich
nice results
Thanks:D
4.6GHz is a single stage. -30;)
Quote:
Originally Posted by
luf1c3r
Buena recopilación de todo el juego que has experimentado ;)
Thanks:D
Quote:
Originally Posted by
amdsempron_xs
How many power phases does this board have? I can't get that coz of huge heatsink. :shrug:
Quote:
Originally Posted by
SUPERKAMES
TA890FXE
890FX+SB850
6 Phase(140W)
GT60
AMD Phenom II X6
SATA6Gbps
BIO-Unlocking
100% X.D.C
4 DDR3-1800(OC)
1394a
GbE
8Ch(ALC892)
//Con này được cái giá rẻ ở VN chừng 2m6
:up:
Quote:
Originally Posted by
over@locker886
Nice results as always namegt! But I think CH IV F is better :p:
Cross Hair is a very good board.
I got the board
This is very good overclocking memory:up:
http://www.playwares.com/xe/files/at...6/013/1091.jpg
-
Incredible collection of top results there, congrats for a job well done :clap:
-
how's the fan control off the mother board on this board ?
I'm not liking this Q fan thing from asus.
where I can't set lowest rpm and max speed for a certain temperatures. (like the jetway board I have, that's not even using pwm fan either.)
-
always amazing namegt!
& yes HK where usually new stuff comes out first is left in the dark this time with the 960T & X6 core CPU's :(
i guess their being punished for selling them too early before the NDA was lifted
-
namegt, i dont know if i ever told you but your :banana::banana::banana::banana:ing crazy!!!! great stuff man :up:
-
Nah...it only happened to one of the suppliers
Rumor...the new 6 cores were made exclusive to one local supplier this time. They only released around 20pcs of 1090T for the whole market a few weeks ago
Hope they've got enough supply to feed the hungrey market
For 960T, I dun think it'll be available til mid or end of June:mad:
Quote:
Originally Posted by
duron
& yes HK where usually new stuff comes out first is left in the dark this time with the 960T & X6 core CPU's :(
i guess their being punished for selling them too early before the NDA was lifted
-
^ thanks for the info Mad222
...& so the waiting game continues :D
-
this mobo runs ddr3 @ 2000mhz,doesn't it ? such as Gskill flare .?
-
The hard DDR3 2000MHz:(
For memory performance, but they will try to improve.
-
Hows the BCLK overclock on this board for 1055T overclocking?
-
There is no BCLK (or FSB) in AMD systems... I assume you mean the HT reference clock?
I don't have a 1055T myself (preferring the Black Editions) but here's an example:
http://www.rebelshavenforum.com/sis-...735;p=7#000103
It appears to be one of the many motherboards that let you select the Turbo multiplier of 16.5x for the 1055T.
-
Wow that's even better. Extra multipliers will help.
Reason for the 1055T
I got the 1055T with TA890FXE for 250 USD from Fry's 25th anniversary sale. I don't have the ram currently so I couldn't test it out. I been testing this on TA790GXE 128M highest it can go is around 280 but I avoid beyond 4 GHz because it will cause motherboard to shutdown (I'm guessing the hot mosfets because CPU is running cool)
-
-
I wonder how 890FXE would clock Gskill Eco at 6-7-6? is it same as flare huh?
-
I cant download manual from the Biostar website.
How big is the step for changing Vcore, Vmem, Vcpu-nb, Vht, and how high can I set this voltage?
-
Quote:
Originally Posted by
namegt
Nice :up:
-
AMAZING results and...you like my backrounds don't you :)
-
Quote:
Originally Posted by
Tomasis
I wonder how 890FXE would clock Gskill Eco at 6-7-6? is it same as flare huh?
This is the thread for discussing AM3/DDR3 for AMD systems:
http://www.xtremesystems.org/forums/...234689&page=19
Why do you think Eco is the same as Flares? Judging by that thread the Eco's don't clock as high as Flares and voltage doesn't help them much (they are low voltage anyway).
Quote:
Originally Posted by
Jarek_135
I cant download manual from the Biostar website.
How big is the step for changing Vcore, Vmem, Vcpu-nb, Vht, and how high can I set this voltage?
In the CPU/NB FID/VID section of the BIOS:
CPU/NB both go from 0.0000v to 1.5500v in 0.0125v increments.
In the "Overvoltage" section there are additional overvoltage adjustments that compound with the CPU/NB VID you've already set and here is where you see the memory, chipset, SB and HT. You can use both the CPU/NB VID and the overvoltage if you need to go over 1.55v for those.
CPU adjustment is from +0.05v to +1.45v in 0.05v increments. For the CPU-NB the adjustment here is +0.05v to +0.2v in 0.05v increments.
Memory has different increments for undervolting and overvolting. Undervolting goes from -0.4v to -0.05v in 0.05v increments. Overvolting goes from +0.01v to +0.63v in 0.01v increments.
The NB(chipset), SB, and HT adjustments only go upwards, in increments of 0.01v. The "NB" & SB max at +0.4v while the HT maxes at +0.3v.
-
http://www.biostar.com.tw/app/en/mb/bios.php?S_ID=482
New BIOS out:
Upload Date 2010-06-01
Description Improve OC ability ( Beta )
89FAD601.BST
:) Going to check this tonight.
-
Quote:
Originally Posted by
DedEmbryonicCe1
To see what differences you notice with this new bios. I hope to try it these days:)
-
New bios ... Thank you.
Enhanced OC ... Good news.
Let's check the advanced OC.:D
-
I look forward to new results NameGT.:rotf:
-
How did he manage to do 16.5 on the 1055T with TA890FXE? I can't find any settings in BIOS. Same with NB to get higher than 2 GHz without using HT RCLK.
-
Quote:
Originally Posted by
panzerchaos47
How did he manage to do 16.5 on the 1055T with TA890FXE? I can't find any settings in BIOS. Same with NB to get higher than 2 GHz without using HT RCLK.
Turbo multipliers.
-
I did enable turbo a while ago. It wouldn't show 16.5 on CPU-Z under prime95 load on single thread and set Affinity to CPU 0. I check 0 - 5 cores on CPU-Z remains at 14.
-
I tihnk he has turbo disabled. Some BIOSes let you use turbo multipliers like a normal multiplier.
-
I have no clue what I'm doing wrong. I had same BIOS and started using newer 506 then 601 that was posted today.
-
Bios 0601
890FXE weak memory OC:(
Who can do to reach 1800MHz memory?:rolleyes:
-
They need to allow looser timings on WR, WTR, and RTP.
Same problem I have with my Biostar TA785G3.
Tell them to do it GT:)
Anyone know how to make their own bios settings:D:shrug:
-
Quote:
Originally Posted by
slaveondope
They need to allow looser timings on WR, WTR, and RTP.
Same problem I have with my Biostar TA785G3.
Tell them to do it GT:)
Anyone know how to make their own bios settings:D:shrug:
Memory performance, and the clock
I always have them, and feedback.
cpu clock is very good, but the memory clock dissatisfied:mad:
-
Amazing clocks there NameGT, :thumbsup: people like you inspire us, keep up the good work.
-
So far all I've noticed with the 6/01 BIOS is that AGESA was updated from 3.7.0.0 to 3.7.0.1 and that the G.P.U. power phase switching is disabled and greyed out. I was already disabling G.P.U. with the previous BIOS anyway so this bug(?) doesn't hurt me.
-
Quote:
Originally Posted by
LittleKnown
Amazing clocks there NameGT, :thumbsup: people like you inspire us, keep up the good work.
Thanks:)
Quote:
Originally Posted by
DedEmbryonicCe1
So far all I've noticed with the 6/01 BIOS is that AGESA was updated from 3.7.0.0 to 3.7.0.1 and that the G.P.U. power phase switching is disabled and greyed out. I was already disabling G.P.U. with the previous BIOS anyway so this bug(?) doesn't hurt me.
Check with AGESA 3.7.0.1
I have not used it yet, but what changes?:rolleyes:
-
Is there way to make high RCLK stable on this board? I had the BIOS reset to default settings at 265 MHz. Similar reset happened to my TA790GXE 128M board when I hit 300 MHz on RCLK.
-
I don't know. I booted my 1090T at 265 MHz * 13 and with all other multipliers dropped just to see and it was unstable. Well, I couldn't get into the BIOS anymore but Windows 7 booted up and I was able to run Prime 95 - Blend for 30 minutes before I stopped it.:shrug: I had to reset the CMOS due to that, it seemed like during the boot process keyboard commands weren't being read (I couldn't disable/enable NumLock for instance). Just another reason why I prefer unlocked processors.;)
-
Yeah same here I been using unlock since Socket A Athlon XP Mobile 2500 with pin mod on the Biostar M7NCD. 1055T is first AMD CPU I use that is multiplier lock.
I found similar a bug that you set the 1.475 vcore would cause a huge drop in performance.
1.475
http://img199.imageshack.us/i/cbr115060701.png/
1.463
http://img690.imageshack.us/i/cbr115060700.png/
I'm using 601. This is similiar to TA790GXE 128M beta BIOS.
I manage to pass 265 MHz by cold booting it. I did it all the way to 280. lol Cold boot on every BIOS change.
-
Must await the final bios, this is still beta. Biostar hopefully not miss the performance of the ram.
-
I got 4 GHz but unstable because of RAM timings. lol I can't get into the BIOS to mess with the timings. It's stable enough to do couple of benchmarks and browsing.
http://valid.canardpc.com/show_oc.php?id=1230227
Somehow it like a hit and miss. Feels like CPU Configuration is set to auto but you can't access it on the BIOS like on TA790GXE 128M. Every time I see the C6 error at 286 MHz RCLK I hit the reset until you see bunch of numbers like 37 and the post screen to the OS. It seems stable on prime95 cpu test for 25 mins. I didn't do blend because the ram isn't stable and it was tested before. Sometimes I hit more 3 times to boot the OS.
-
What RAM are using panzerchaos47?
I'm going to use Mushkin.
-
I got the Super Talent DDR3-2200 CL8 but single stick. Since the sale was cheaper than dual channel kits and I enough for one.
http://www.ewiz.com/query.php?dp=1&d...=%23displaytop
-
This double post for bump.
I'm got 5-5-5-15-26-1T stable at 1386. I increase voltage a lot on the NB mainboard and it's highlighted yellow. I don't know if it's safe vcore for 890FX chipset. 1.29 from stock to get the ram timings stable.
https://dl.dropbox.com/u/5700922/prime95-061400.png
-
Any joy with high ram clocks on a thuban from anyone yet? My max bootable is around 1700 with tight timings. Needs some tweaking. New OC bios is great apart from the ram issues :clap: Software issues tho...
http://img811.imageshack.us/img811/7...rpi32m1358.jpg
1600 is flawless going to have to play for a day with 32m and see if I cant get em faster and tighter. 15 11 no problems so far :)
-
Quote:
Originally Posted by
panzerchaos47
This double post for bump.
I'm got 5-5-5-15-26-1T stable at 1386. I increase voltage a lot on the NB mainboard and it's highlighted yellow. I don't know if it's safe vcore for 890FX chipset. 1.29 from stock to get the ram timings stable.
https://dl.dropbox.com/u/5700922/prime95-061400.png
Until you raise the temperature to 70 ° going well. Try different settings for which you paid to buy better ;)
As this cooled your 1055T?
-
Quote:
Originally Posted by
El Gappo
Any joy with high ram clocks on a thuban from anyone yet? My max bootable is around 1700 with tight timings. Needs some tweaking. New OC bios is great apart from the ram issues :clap: Software issues tho...
http://img811.imageshack.us/img811/7...rpi32m1358.jpg
1600 is flawless going to have to play for a day with 32m and see if I cant get em faster and tighter. 15 11 no problems so far :)
Biostar I think that is costing a little more of what we are used to make our work better ram. Or am I the only one who is giving you this feeling?
These are pleasing results. As cool the 1090T?
-
Quote:
Originally Posted by
El Gappo
Any joy with high ram clocks on a thuban from anyone yet? My max bootable is around 1700 with tight timings. Needs some tweaking. New OC bios is great apart from the ram issues :clap: Software issues tho...
http://img811.imageshack.us/img811/7...rpi32m1358.jpg
1600 is flawless going to have to play for a day with 32m and see if I cant get em faster and tighter. 15 11 no problems so far :)
Biostar I think that is costing a little more of what we are used to make our work better ram. Or am I the only one who is giving you this feeling?
These are pleasing results. As cool the 1090T?
-
Sorry I don't follow :confused:
-
Quote:
Originally Posted by
El Gappo
Sorry I don't follow :confused:
Sorry my bad English;)
What are you using to cool the 1090T? A SS? water?
It is now understood? :)
-
Yeah I'm on a single stage right now reading -14C on the IHS under full load and -34C idle. Only had the chip for a day and I'm still getting to know her :)
http://img18.imageshack.us/img18/9905/maxmem890fxe.jpg
http://img94.imageshack.us/img94/8984/6651511.jpg
I'm actually doing a review right now so I shouldn't spoil to much :)
-
Against more information on these motherboards better;)
This very positive results with SS. Knowing more about this chip will have better numbers safe. I look forward to.
So I have a reference to find out how much you could get with my water system. I hope to reach 4400mhz :p:
The ram you have is also is Super Talent?
-
I will probably do some air testing when it's a bit colder. 30C ambient room temperature yesterday :(
The ram is corsair dominator gt 2000cl8 ;)
You will piss all over 4.4, probably validate around 4.8ish on good water with this board :)
-
Very good ram, I would have liked to buy some of these, but I have to make do with my Mushkin 6-8-6-24. I hope this ram does not limit me.
I have a good quality water but with my 1055T and the ram that I have I'm more limited.
In a couple of weeks I'll post my numbers.
-
Yeah... The 1055t is a very awkward chip with these biostar boards. Give me a shout if you get stuck ;)
Ram will be perfect.
-
Thank you very much El Gappo if I have problems in a couple of weeks I contact you.
Greetings.
-
hey guys i just got this board for my 1055t and i'm having a hell of a time trying to get to 4.0ghz. my settings as of now are the following:
FSB/Multiplier: 286 * 14
CPU Speed: 4.0Ghz
NB Speed: 2002Mhz
CPU Voltage: 1.525v
NB Voltage: 1.3v
RAM Speed: 1525Mhz
Motherboard: Biostar TA890FXE
but still unstable. what else can i do to get stable at 4.0ghz? Ram i'm using right now is crucial ballistix 1600, but i have a set of g.skills black pi coming in very shortly. any help is appreciated.
can you guys list your voltages such as NB and CPU-NB, CPU. that would help me out.
thanks
-
Quote:
Originally Posted by
luf1c3r
Until you raise the temperature to 70 ° going well. Try different settings for which you paid to buy better ;)
As this cooled your 1055T?
It's on air. I can do 833 MHz 6-6-6-18 but it's going limit the CPU clock. 1055T isn't unlock and even NB FID is lock to 10x.
Quote:
Originally Posted by
Spunky424
hey guys i just got this board for my 1055t and i'm having a hell of a time trying to get to 4.0ghz. my settings as of now are the following:
FSB/Multiplier: 286 * 14
CPU Speed: 4.0Ghz
NB Speed: 2002Mhz
CPU Voltage: 1.525v
NB Voltage: 1.3v
RAM Speed: 1525Mhz
Motherboard: Biostar TA890FXE
but still unstable. what else can i do to get stable at 4.0ghz? Ram i'm using right now is crucial ballistix 1600, but i have a set of g.skills black pi coming in very shortly. any help is appreciated.
can you guys list your voltages such as NB and CPU-NB, CPU. that would help me out.
thanks
Over 265 RCLK you will expect C9 error even if you have prime95 stable for 8 hours. I'm guessing this motherboard also has CPU Configuration left on auto and it's not available. Hopefully Biostar would release a BIOS these settings.
-
Quote:
Originally Posted by
panzerchaos47
Over 265 RCLK you will expect C9 error even if you have prime95 stable for 8 hours. I'm guessing this motherboard also has CPU Configuration left on auto and it's not available. Hopefully Biostar would release a BIOS these settings.
I never get c9 errors but do get c6 booting errors at anything above 285 fsb. Which auto CPU config are u referring to? Also which BIOS are you guys using? Anyone using the new beta BIOS?
-
I mean it's not available in the BIOS and C6 is the error I was looking from opposite direction. I notice resetting couple of times it will pass C6 error. I'm guessing it was selecting random configuration on each reset. I'm using 4/19 BIOS.
http://forums.pcper.com/showthread.php?t=462999
-
been staring at hwmonitor and realized the temp labeled "motherboard" is upwards of 70+ degrees Celsius. can anyone else confirm this? is it a bogus reading or is it really that hot?
-
I took my heat sinks off before running the board. The VRM heatsink wasn't making contact on one side because of a poorly placed black insulator thingymabob :( Take it off and stretch the springs, if it's still 70+ don't worry :)
-
Quote:
Originally Posted by
El Gappo
I took my heat sinks off before running the board. The VRM heatsink wasn't making contact on one side because of a poorly placed black insulator thingymabob :( Take it off and stretch the springs, if it's still 70+ don't worry :)
Thanks what are your motherboard temps, if you dont mind me asking?
-
30C in the bios with about 1.3 northbridge voltage and running 1.6 v core. It's actually a very cool running board in comparison to some others :)
-
Mmm is normal to have a big temperature difference between cores and processor? I really mark the cores at 21 ° C and 31 º C. CPU. At what temperature should I pay attention.
-
Quote:
Originally Posted by
El Gappo
30C in the bios with about 1.3 northbridge voltage and running 1.6 v core. It's actually a very cool running board in comparison to some others :)
wow thats a huge difference compared to my board! why do you say not to worry about my temps reaching 70 degrees? removing my board is going to be a pain with the water cooling setup i have. oh well, gotta do it.
-
The 21 is a false reading, happens on most boards with thuban. Socket temperature is the more accurate one. I said don't worry because I often get bugs with cpu-hw monitor anyway.
-
Quote:
Originally Posted by
Spunky424
been staring at hwmonitor and realized the temp labeled "motherboard" is upwards of 70+ degrees Celsius. can anyone else confirm this? is it a bogus reading or is it really that hot?
I have it in water at 31 ° C
-
well i reseated the NB heatsink. put some ocz freeze and extended the springs, my motherboard temps are 10 degrees cooler at around 50-60 depending on load. it however didnt make me anymore stable at my 4.0ghz goal. =(
-
Quote:
Originally Posted by
Spunky424
well i reseated the NB heatsink. put some ocz freeze and extended the springs, my motherboard temps are 10 degrees cooler at around 50-60 depending on load. it however didnt make me anymore stable at my 4.0ghz goal. =(
you could try putting an amd sock fan next to it it sounds like your airflow is bad there
-
Quote:
Originally Posted by
stangracin3
you could try putting an amd sock fan next to it it sounds like your airflow is bad there
is the motherboard temp sensor located in the northbridge? im water cooled now but i do have an extra chipset block that i could use, my only problem would be how to cool the mosfets?
-
Hi Chris. The recommended tension for this for 24/7 are 1.5V for the processor. If you lowered the temperature 10ºC can northbridge that you can maintain for the summer.
Put a catch like this and their temperatures.
Regards
luf1c3r
-
Quote:
Originally Posted by
luf1c3r
Hi Chris. The recommended tension for this for 24/7 are 1.5V for the processor. If you lowered the temperature 10ºC can northbridge that you can maintain for the summer.
Put a catch like this and their temperatures.
Regards
luf1c3r
thanks lucifer i think i'm just going to slow the speed down and settle for 3.8 or 3.9ghz at 1.45V. also can anyone tell me what the BSODs: Memory_management & System_services_exceptions mean? what is failing? the memory?
-
Hey guys ~:)
New bios is TA890FXE. (0618)
A little more stable.
http://namegt.com/attachment/cfile23...AE18828AA5.BST
-
Cheers :) Will try tomorrow.
-
Quote:
Originally Posted by
El Gappo
Cheers :) Will try tomorrow.
Expect great results.;)
-
This is nice BIOS 290 reachable without C6 error but memory isn't stable at 1800.
I can't hit 300 RCLK even memory timings 6-6-6-18 with settings at DDR3-800. With CPU-NB/HT under 2 GHz.
So far no C6 errors over 275 but I need to give up RAM performance for higher overclock for CPU NB and CPU. 1090 would be easy to work with. I got 2750 NB stable so far.
http://valid.canardpc.com/show_oc.php?id=1259436
-
can someone explain to me how its possible that a week ago i'm prime95 stable for 24 hours and then i start my computer up again and try prime and it wont last for even an hour? i have not changed any bios settings at all.
-
Thanks for the bios, Name ;)
-
Quote:
Originally Posted by
namegt
Expect great results.;)
Don't know about you but I am getting completely random reboots with prime stable settings now. Out of the blue at the desktop and poof now power, all the lights but nobodys home.
May be because I flashed from this stripped os, will try again but if not going back to the 06/01 beta :shrug:
EDIT: tried a good few times, 06/01 is much more stable for me in 24/7 use at least. I will try benching the new one but....
-
To me my ram is more stable but I have to prove it better if you can. I will comment. The cpu I have noticed that I have to upload more vcore. This occurs you El Gappo?
EDIT. As I grab to put the multiplier to 16.5 on this motherboard, said you could but I can not and C1E does not work either, turning off the turbo, the multipliers are fixed all the cores :shrug:
-
Yeah I think so :( Already high enough on the vcore, so I'm reverting back for now, will get to grips with that bios later.
Yeah, 14 is going to be your max multiplier on the 1055t once overclocked as this board does not allow you to manipulate the turbo multi. I've managed over 300 htt stable tho so you shouldn't have a problem, Spunky is making progress as well I think. Voltage does seem to be an issue tho ( needing to much of it. )
-
Well, it hurts me not being able to 16.5. Look at the amount of stress they have to reach 4.2 to put in all cores. The timings are at 7-8-7-23-33. I have to improve if I can.
http://img80.imageshack.us/img80/553...superpi.th.png
And is not stable at all.
