AMD Phenom II X6 1055T can run G.Skill DDR3-2000 CL7-9-7 @ ASUS CROSSHAIR IV FORMULA

Printable View

05-05-2010, 10:49 PM
OCman XPC

AMD Phenom II X6 1055T run G.Skill DDR3-2060 CL7 4x2GB @ ASUS CROSSHAIR IV FORMULA

Hello Everyone :
It is milestone for AMD Phenom II X6 running RAM on 2000MHz using G.Skill DDR3-2000 CL7-9-7-24 , 1.65V . also it is important that ASUS CROSSHAIR IV FORMULA achive the milestone of AMD Six Core CPU running RAM on 2000MHz .:up:

First view : Quite eye-catching color ASUS CROSSHAIR IV FORMULA of the latest ROG motherboard series debut . Using platinum-type capacitor with elegant heat pipe with various ASUS exclusive features.
http://www.coolaler.com.tw/ocman/C4F/C4F01.JPG

Heat Pipe Close-up 1
http://www.coolaler.com.tw/ocman/C4F/C4F02.JPG

Heat Pipe Close-up 2
http://www.coolaler.com.tw/ocman/C4F/C4F03.JPG

The delicate ROG LOGO on South Bridge heat sink
http://www.coolaler.com.tw/ocman/C4F/C4F04.JPG

Quick overclocking key, hardware key to Core unlock , POWER key and RESET button
http://www.coolaler.com.tw/ocman/C4F/C4F05.JPG

Back Panel I/O Ports
http://www.coolaler.com.tw/ocman/C4F/C4F06.JPG

Marvell Gb network chip
http://www.coolaler.com.tw/ocman/C4F/C4F07.JPG

NEC USB 3.0 chip
http://www.coolaler.com.tw/ocman/C4F/C4F10.JPG

Rapid determination Q-LED for easier debugging problems
http://www.coolaler.com.tw/ocman/C4F/C4F11.JPG

Heat pipe fixed way is to use pressure-type screw
http://www.coolaler.com.tw/ocman/C4F/C4F13.JPG

Second view : G.Skill DDR3-2000 CL7-9-7-24 1.65V FOR AM3
http://www.coolaler.com.tw/ocman/C4F/C4F15.JPG
http://www.coolaler.com.tw/ocman/C4F/C4F16.JPG

Really nice stacked wood
http://www.coolaler.com.tw/ocman/C4F/C4F18.JPG

It seems rather obvious attempt of G.Skill that the color is very match ASUS ROG MB .
http://www.coolaler.com.tw/ocman/C4F/C4F20.JPG

Zoom in
http://www.coolaler.com.tw/ocman/C4F/C4F21.JPG

The milestone of AMD Phenom II X6 Debut
CPU AMD Phenom X6 1055T OC.>> 4GHz
CPU Voltage 1.53V
CPU/Nb voltage customary small added to 1.35V voltage
DDR3-2000 CL7-9-7-24 , Voltage 1.65V
In order to verify the strength , running 4x2GB , total 8GB memory size. and running full loading of Hyper PI 12 Core to meet AMD Six-Core CPU .
http://www.coolaler.com.tw/OCMAN/C4F/2KC7/1.PNG

3 Core finished the application
http://www.coolaler.com.tw/OCMAN/C4F/2KC7/3.PNG

12 Core finished the application
http://www.coolaler.com.tw/OCMAN/C4F/2KC7/4.PNG

OC. 4GHz @ MemroyTest 100% PASS
http://www.coolaler.com.tw/OCMAN/C4F/2KC7/5.PNG
05-05-2010, 10:58 PM
crazydiamond

cool :) know when these rams will be available to purchase? or prices?
05-05-2010, 11:20 PM
namegt

:shocked:
Great memory, clock and timing:up:
05-05-2010, 11:23 PM
mav2000

Awesome...but still not available in retail.
05-06-2010, 12:10 AM
crazydiamond

have you done any testing with cas6, how high can you clock it with something like 6-7-6 timings? would also be interested to compare results w/ the 7-9-7 2000 settings
05-06-2010, 12:42 AM
richierich

love the quick review with pictures
05-06-2010, 01:44 AM
Ronaldinho_07

the highest memory clock which you can get ???
05-06-2010, 01:50 AM
G.Foyle

Nice frequency, but NB @ 2000 = :down:
05-06-2010, 02:00 AM
[XC] Oj101

Can we tighten up that tRCD a bit? That's a bit of a sore point for AMD, the RAM looks more like it was designed with P55 in mind than 890FX. +1 for 6-7-6 testing though.
05-06-2010, 04:55 AM
OCman XPC

G.Foyle : Nice frequency, but NB @ 2000 = :down:
_____________________________________________

This time is to verfiy RAM DDR3 performance @ AMD platform , so setting NB freq. just @ 2000MHz .
Increasing NB freq. can enhance overall performance , nowadays , I have business trip , waiting I come back. Thank your for your opinion . :welcome:
05-06-2010, 06:08 AM
chew*

Quote:

Originally Posted by OCman XPC

G.Foyle : Nice frequency, but NB @ 2000 = :down:
_____________________________________________

This time is to verfiy RAM DDR3 performance @ AMD platform , so setting NB freq. just @ 2000MHz .
Increasing NB freq. can enhance overall performance , nowadays , I have business trip , waiting I come back. Thank your for your opinion . :welcome:

OCman.

He has a very valid point. the lower you drop the NB the higher you can clock ram.....Even on a stock cooler when i do reviews I at least try to push to 2500 NB. Reason being ram may not pass at same speeds it passed at 2000NB.
05-06-2010, 07:07 AM
Nelly

Daft Question time . . .

I'm running 1333Mhz @ 7-7-7-24, does 2000Mhz @ 7-9-7 timings improve fps performance in games as well as other software? with 890FX?

I did check with a 790FX using 2000Mhz 9-9-9-24 OCZ Blade sticks a year ago at various timings but all results didn't make even 1fps difference only fractions.
05-06-2010, 10:07 AM
imamage

Nice RAM pair you got there
8GB @ DDR3-2000 :yepp::yepp:
05-06-2010, 11:39 AM
i found nemo

why does it say 12 cpus? did i miss something?

edit- okay i see why. good thinking ;)
05-08-2010, 08:45 AM
OCman XPC

Quote:

Originally Posted by i found nemo

why does it say 12 cpus? did i miss something?

edit- okay i see why. good thinking ;)

Hyper PI when running 6 cores, RAM maximum load is only about 3GB, to a more stringent test set Hyper PI when running 12 cores, RAM maximum load of about 5.6GB( Currently set RAM-DDR3-2000 CL7 total size 8GB) :welcome:
05-08-2010, 09:37 AM
[XC] Oj101

Or..... Memtest / Everest stability test?
05-08-2010, 05:40 PM
PatRaceTin

does ddr2000 require

thuban+800 chipset ???
05-08-2010, 05:55 PM
BeepBeep2

800 chipset, but more like Gigabyte UD7 or CH4Formula. It's been done on 965's and 555's but only on those boards. I think the ASUS 890GX might be able to clock that high also.
05-09-2010, 12:40 AM
FlanK3r

mainstream ASUS Evo too :)
05-09-2010, 09:15 AM
BeepBeep2

Quote:

Originally Posted by FlanK3r

mainstream ASUS Evo too :)

Yep.

I'm RMA'ing my Gigabyte board due to some problems I'm having.

This bouad has a 940 Mhz wall, however it's a Revision 1.0 board. Rev 2 is already out. If I get a Rev. 2 board back I'll be sure to test ram clocks.
05-09-2010, 10:41 AM
ChrisB17

I want these when do they come out? They look fantastic paired with the Crosshair board.
05-10-2010, 03:07 AM
OCman XPC

Quote:

Originally Posted by Nelly

Daft Question time . . .

I'm running 1333Mhz @ 7-7-7-24, does 2000Mhz @ 7-9-7 timings improve fps performance in games as well as other software? with 890FX?

I did check with a 790FX using 2000Mhz 9-9-9-24 OCZ Blade sticks a year ago at various timings but all results didn't make even 1fps difference only fractions.

Currently, I found that using AMD Phenom II x 4 965 can not run DDR3 2000Mhz @ dual channel , Only using AMD Phenom II x 6 1055T can run DDR3 2000Mhz @ dual channel .

It seems that the IMC of AMD Phenom II X6 is better than Phenom II X4 . :up:
05-10-2010, 07:16 AM
PatRaceTin

Quote:

Originally Posted by OCman XPC

Currently, I found that using AMD Phenom II x 4 965 can not run DDR3 2000Mhz @ dual channel , Only using AMD Phenom II x 6 1055T can run DDR3 2000Mhz @ dual channel .

It seems that the IMC of AMD Phenom II X6 is better than Phenom II X4 . :up:

how about phenom II x6 with 790FX chipset??? would it be able to run DDR2000 ?
05-10-2010, 07:45 AM
Smartidiot89

2000MHz on 4 sticks, that just great. Does it pass memtest?
05-10-2010, 08:51 AM
OCman XPC

Quote:

Originally Posted by Smartidiot89

2000MHz on 4 sticks, that just great. Does it pass memtest?

Pass MemTest of runing 100%

http://www.coolaler.com.tw/OCMAN/C4F/2KC7/5.PNG
05-10-2010, 09:33 AM
OCman XPC

Quote:

Originally Posted by PatRaceTin

how about phenom II x6 with 790FX chipset??? would it be able to run DDR2000 ?

I will try Phenom II X6 with 790FX chipset .

Currently , I just make sure Phenom II X6 with only ASUS 890FX Motherboard can run DDR3-2000 , and more DDR3-2060 passed .

To testing DDR3-2060 CL7 @ dual channel 4x2GB
Hyper PI setting caculation 32M , running 12 Cores .

LOOP 9
http://www.coolaler.com.tw/OCMAN/C4F/2060/1.PNG

LOOP 23
http://www.coolaler.com.tw/OCMAN/C4F/2060/3.PNG

2 Cores finished
http://www.coolaler.com.tw/OCMAN/C4F/2060/4.PNG

Finally , 12 Cores finished
http://www.coolaler.com.tw/OCMAN/C4F/2060/5.PNG
05-11-2010, 11:08 PM
OCman XPC

Quote:

Originally Posted by BeepBeep2

Yep.

I'm RMA'ing my Gigabyte board due to some problems I'm having.

This bouad has a 940 Mhz wall, however it's a Revision 1.0 board. Rev 2 is already out. If I get a Rev. 2 board back I'll be sure to test ram clocks.

Because I tried to using Phenom II X4 run peak DDR3-1900MHz @ ASUS CH4F , AMD improve the IMC of Phenom II X6 CPU
Recommand using AMD Phenom II X6 CPU to runnig over DDR3-2000MHz .:up:
05-13-2010, 05:35 AM
map01ch

Interesting OCman..... thanks for sharing.
05-13-2010, 05:51 AM
Andi64

Can you run DDR3-2000 at 1T command rate?
05-13-2010, 09:13 PM
map01ch

How is it with corsair Dominator 8GB?
05-19-2010, 04:53 AM
OCman XPC

Quote:

Originally Posted by map01ch

How is it with corsair Dominator 8GB?

Because I have no corsair Dominator memory , I checked CROSSHAIR IV FORMULA memory support QVL list from ASUS web . Currently , I did not found it .
05-19-2010, 05:16 AM
chew*

All this is great but how's prime 95 blend.

Seems to me all that memory speed gets wasted on an IMC that still has a limitation in prime 95 ;)
05-24-2010, 12:11 AM
OCman XPC

Quote:

Originally Posted by PatRaceTin

how about phenom II x6 with 790FX chipset??? would it be able to run DDR2000 ?

I tried my AMD Phenom II x6 1055T with ASUS M4A79T- Deluxe , my best runnig DDR3-1800 CL8 1T ,

Hyper PI LOOP 18
http://www.coolaler.com.tw/ocman/M4A79T/M4A79T-1.jpg

Hyper PI Finish
http://www.coolaler.com.tw/ocman/M4A79T/M4A79T-2.jpg

It seems that running DDR3-2000 @ AMD BEST Match are Phenom II x6 with 800 series chipset . :up:
05-24-2010, 01:05 AM
Zeus

That's pretty but trcd is waaay too loose. Can you give some more volts and lock timings down?
05-24-2010, 02:07 AM
chew*

Quote:

Originally Posted by OCman XPC

It is seem that running DDR3-2000 @ AMD BEST Match are Phenom II x6 with AMD 800 series chipset . :up:

You should fix that to it seems that benching @ 2000 is best on 800 chipset.

Unless of course you can run say prime 95 blend at 2000 ram ;) at normal average user clock speeds.
05-24-2010, 12:07 PM
sandlewood

thanks for sharring
can test on AMD 785 chipset?
05-25-2010, 04:36 AM
Barr3l Rid3r

and they say it' special for AMD? I can see no difference to my old ripjaws.

http://i49.tinypic.com/213qf4w.jpg
05-26-2010, 12:49 AM
luf1c3r

Could you give us information about operation of the ram with just two sticks instead of four? A comparative power to see that you can take with other clubs such as the one just put up our friend here.
05-26-2010, 09:12 AM
OCman XPC

Quote:

Originally Posted by Zeus

That's pretty but trcd is waaay too loose. Can you give some more volts and lock timings down?

AMD Phneom II X6 with M4A79T Deluxe , do my best to improve tRCD timing DDR3-1800 7-8-7-24 ,:yepp:

Pass Hyper PI 32M
http://www.coolaler.com.tw/ocman/M4A79T/M4A79T-3.jpg

Pass MemTest 700%
http://www.coolaler.com.tw/ocman/M4A79T/M4A79T-4.jpg
05-28-2010, 10:54 AM
OCman XPC

Quote:

Originally Posted by G.Foyle

Nice frequency, but NB @ 2000 = :down:

OC 4GHz , 250MHz x16
CPU/NB (Uncore) Freq.=2500MHz
DDR3-2000 CL7-9-7-28
Burning 2Hr30min, Memtest 250% stable
Task Manager , CPU Usage 100% , Physical Memory usage 7.6GB
http://www.coolaler.com.tw/ocman/C4F/UN25M.PNG

Test Hyper PI 32M/ 12Cores using CPU/NB Freq.=2500 MHz , spend 25 min.28sec. , using CPU/NB Freq.=2000 MHz , spend 31min.57sec. ,
Inrease Uncore Frequency is helpful .
http://www.coolaler.com.tw/ocman/C4F/UN25PI.PNG
05-28-2010, 11:24 AM
Shadowized

my x4 955 had problems running anything above 1500 in the first two memory slots, I guess the x6's can handle it better with the improved IMC? (also yay firstpost).
05-28-2010, 02:44 PM
BeepBeep2

Yup. But always use the back slots...they are better.
05-28-2010, 04:23 PM
Shadowized

yeah I've been using the two farthest slots for a while, it just makes no sense that every guide I've read suggests the two closest to the CPU are the best :rolleyes:

may have to pickup a kit of this memory when my x6 1055 gets here and see if I can get 1700 6-6-6-16-1t or something out of it on the m4a79t
05-28-2010, 04:38 PM
BeepBeep2

That won't happen without Hyper chips.

Look up the ram in my sig and buy some. (In the US it's ~$200...) Guaranteed 1750 6-6-6-18. Hyper is EOL so buy fast.
05-30-2010, 09:01 AM
OCman XPC

Quote:

Originally Posted by chew*

All this is great but how's prime 95 blend.

Seems to me all that memory speed gets wasted on an IMC that still has a limitation in prime 95 ;)

OC 4GHz , 250MHzx16 ,
CPU/NB Frequency =2500MHz , DDR3-2000 CL7-9-7 1T
Prime 95 blend
http://www.coolaler.com.tw/ocman/C4F/UN25P.PNG
05-30-2010, 11:24 AM
chew*

Quote:

Originally Posted by OCman XPC

OC 4GHz , 250MHzx16 ,
CPU/NB Frequency =2500MHz , DDR3-2000 CL7-9-7 1T
Prime 95 blend
http://www.coolaler.

I appreciate the effort but how about say 1 hour min on that IMC.

1 hour is not so fad considering the 30 min 32m tests that i know must have been boring to watch.
06-03-2010, 11:29 AM
DR G frag

Hello, it's not the subject of this topic but what do you do to have multiplier 16X on the 1055T, I can not have more than 14 on my 1055T?
06-03-2010, 12:12 PM
BeepBeep2

Quote:

Originally Posted by DR G frag

Hello, it's not the subject of this topic but what do you do to have multiplier 16X on the 1055T, I can not have more than 14 on my 1055T?

ASUS Crosshair IV Formula allows to lock turbo multipliers on all cores so you can choose up to 16 :yepp:
06-03-2010, 02:16 PM
DR G frag

I have a Crosshair IV formula too (with bios 801) and I can't arrive to have multiplier 15 or 16 (in the bios I can choose it but on cpu-Z (windows7-64bits) I only see multiplier 14.
What is the procedure to have multiplier 15 or 16 with the 1055T? it's in the bios? in TurboV evo? with other application?
To don't disturb the aim of this tread you can answer me in Private message.
Thanks
06-03-2010, 03:03 PM
BeepBeep2

I honestly do not know...I do not own this board.
06-03-2010, 03:30 PM
Barr3l Rid3r

Is it possible to unlock the 16x multiplier on 790fxt-ud5p?
06-03-2010, 11:23 PM
lopri

Amazing results, OCM XPC! Disregard distractions, keep them coming!
06-03-2010, 11:53 PM
LittleKnown

Amazing, simply amazing.
When will these rams be available in market?
06-09-2010, 11:07 PM
OCman XPC

I really like AMD Phenom II X6 CPU with 890FX MB , because there is high C/P value and running over DDR3-2000 MHz (4x2GB) .
I think the new value is useful for Graphic users of Photoshop and PRO-E tools .

I tried that the Verification of AMD Phenom II x6 with 790FX MB can not run DDR3-2000 MHz .
This time , to try the combination of Phenom II X4 C3 version with 890FX MB running barely DDR3-1980 MHz ( 2x2GB ) .

Task Manager >> CPU usage 100% , Physical memory usage 3.88GB/4GB
MemTest 100% Pass
http://www.coolaler.com.tw/ocman/D3198/1004.png

MemTest 500% Pass
http://www.coolaler.com.tw/ocman/D3198/1006.png

MemTest 1000% Pass , burning 2hr.
http://www.coolaler.com.tw/ocman/D3198/1008.png

Hyper PI 32M/4 Cores testing
LOOP 20
http://www.coolaler.com.tw/ocman/D3198/1010.png

PI Finished
http://www.coolaler.com.tw/ocman/D3198/1011.png
06-21-2010, 07:55 PM
OCman XPC

Quote:

Originally Posted by crazydiamond

cool :) know when these rams will be available to purchase? or prices?

Quote:

Originally Posted by Littleknown

Amazing, simply amazing.
When will these rams be available in market?

Go to NewEgg.

G.SKILL Flare 4GB (2 x 2GB) DDR3 2000 CL7 Model F3-16000CL7D-4GBFLS for AMD Phenom II X6 CPU
http://www.newegg.com/Product/Produc...82E16820231370

G.SKILL Flare 4GB (2 x 2GB) DDR3 2000 CL9 Model F3-16000CL9D-4GBFLS for AMD Phenom II X6 CPU
http://www.newegg.com/Product/Produc...82E16820231371

G.SKILL Flare 4GB (2 x 2GB) DDR3 1800 CL7 Model F3-14400CL7D-4GBFLS
http://www.newegg.com/Product/Produc...82E16820231367

G.SKILL Flare 4GB (2 x 2GB) DDR3 1800 CL9 Model F3-14400CL9D-4GBFLS
http://www.newegg.com/Product/Produc...82E16820231369

Flare series is designed for AMD.:up::up:
06-21-2010, 10:30 PM
Zeus

Does anyone have the slightest idea what chips are on these sticks? Powerchips maybe? :shrug:
06-21-2010, 10:51 PM
Dumo

Quote:

Originally Posted by Zeus

Does anyone have the slightest idea what chips are on these sticks? Powerchips maybe? :shrug:

I think it is
07-22-2010, 04:58 AM
OCman XPC

Quote:

Originally Posted by Zeus

Does anyone have the slightest idea what chips are on these sticks? Powerchips maybe? :shrug:

Hello Guy ,
I got message that the RAM chip is from Powerchips FAB.:up::up:
07-22-2010, 11:24 AM
FlanK3r

i forgot it, how much voltage using for RAMs?
07-22-2010, 12:17 PM
BeepBeep2

Quote:

Originally Posted by OCman XPC

Hello Guy ,
I got message that the RAM chip is from Powerchips FAB.:up::up:

That has been known for ages, GSkill's whole lineup basically consists of PSC Powerchip.
07-26-2010, 02:22 AM
OCman XPC

Quote:

Originally Posted by FlanK3r

i forgot it, how much voltage using for RAMs?

Hello , Flank3r
The RAM's vlotage is 1.65V @ DDR3-2000MHz .
07-26-2010, 02:55 AM
mecho_gruh

Hi, I'm wondering which set to buy, Flare 1800 CL7 or 2000 CL7. I'm using Asrock 890gx extreme3 and phenom 1055T, is the motherboard going to be a problem for the memory OC. The second one costs extra 50 Euro, and I'm not sure what kind of improvement it's going to make when itinsn't used in a benchmark.
07-26-2010, 04:00 AM
BeepBeep2

That depends, how good is your current ram?
07-26-2010, 04:11 AM
mecho_gruh

How exactly depends of my current ram, I'm going to replace it with the GSkill i mentioned. I'm just wondering if my motherboard is going to be a problem.
07-26-2010, 08:29 PM
OCman XPC

Quote:

Originally Posted by mecho_gruh

How exactly depends of my current ram, I'm going to replace it with the GSkill i mentioned. I'm just wondering if my motherboard is going to be a problem.

Hello ,
ASrock 890GX Extreme supports Dual Channel DDR3 1800(OC) ,
GSkill Flare series is designed for AMD Platform ,
DDR3-2000MHz @AMD Platform is exciting . :up::up:

You can check G.Skill Flare series supporting QVL of AMD-MB .
So far , I found only ASUS AMD-890FX MB supporting DDR3-2000MHz.
07-26-2010, 09:34 PM
Leeghoofd

Quote:

Originally Posted by mecho_gruh

How exactly depends of my current ram, I'm going to replace it with the GSkill i mentioned. I'm just wondering if my motherboard is going to be a problem.

Till now the Gskill Flares 2000C7 are only working properly on the listed Asus boards... 2000Mhz C7 on another board is a no go here... even 1800C6 doesn't work 100% stable... C7 however is...
07-26-2010, 09:59 PM
CoNtAcT

nice ram speed and timings.