hello i have a corsair 750tx power supply and was wondering if it would be powerful to power one 5970
Printable View
hello i have a corsair 750tx power supply and was wondering if it would be powerful to power one 5970
As long as not too many peripherals connected, then you'll be ok
Exp: 1 HDD, 1 DVD and a case fan
That may be a problem for me because i have one dvd 6 fans, 2 hdd's 1 ssd, and my cpu is a Phemon ii 940 Black edition and i dont want to get rid of any of them
Sure . . . it can handle easily one 5970, even 2 of them
Sorry but I totally disagree with that.Quote:
Originally Posted by Edward88
One yes, two definately no..
Yes, any GOOD 750w power supply will be able to take care of a 940BE & HD5970
the Corsair you have will run that system just fine... but two HD5970's - UH... NO!
right now I'm running 2x Xeon 5420's in a Skulltrail setup w/ 2x HD4870's in crossfire, plus 4 hard drives with a Zippy 700w and it's not even breaking a sweat... but I did just get my Zippy 1200w in the mail last week, so that's going in my build pretty soon :up:
i think that it could do 2 each card is about 215W so if u arnt ocign to heavily u would have 430W of gpu 150W of cpu so thats 580W or so so that leaves a good 150W for peripherals, it would not be ideal thoughQuote:
Originally Posted by Movieman
Pcpower&cooling Silencer 750w over here with:Quote:
Originally Posted by Dumo
Core i7 920 @ 3.8ghz @ 1.25v
6gb ram OCZ Platinum @ 1800mhz @ 1.64v
5 HDD, 500 - 250 - 160 + 80 gb x 2.
5 Coolermaster R4
1 Thermaltake 14cm
And HD 5970 @ stock.
No problem on games and bench's.
i also just remembered that i was thinking about installing a liquid cooling system too or would that use up to much power?
a water cooling pump on average, only draws 10-18 watts... 25 watts maximum for typical 12v DC pumps - you wouldn't have any problems with drawing too much power in addition to your system
I ran my 4870x2 at stock with my x48 / q6600 system ( which was at 3.6Ghz ) on my Enermax. That said a 750 should be fine assuming proper amperage. However if you plan to highly clock the system AND the 5970 you *might* be asking for trouble. There have been a fair share of reviews / users who mention that they had power issues when overclocking even small amounts. Now if you plan on going water ( and can afford it ) you should be able to afford a beefier PSU (given a nice PSU only costs a few bucks more than a 5970 waterblock ) but thats just my 10 cents :)
I can't argue your math but I've always worked from the perspective of overkill is just enough..Quote:
Originally Posted by zanzabar
For me with two of those especially if OC'ing them I'd want a minimum of a 100w and probably 1200w
When I set up the 2-5970's on my SR2 rig I had a PCP+C1200w feeding everything but the cards.
Had a separate 1200w Antec on those..
Quote:
Originally Posted by Movieman
Without oc, one corsair 750 can handle two 5970 and one 940, as you said, its not the best idea, but it can.
Overkill is allways better :D
People just over-do everything, you are more than fine with a 750W PSU for that card. You will never use 1200W, not even on triple SLI/CrossX
not a problem
Quote:
Sorry but I totally disagree with that.
One yes, two definately no..
Really necessary?Quote:
I can't argue your math but I've always worked from the perspective of overkill is just enough..
For me with two of those especially if OC'ing them I'd want a minimum of a 100w and probably 1200w
When I set up the 2-5970's on my SR2 rig I had a PCP+C1200w feeding everything but the cards.
Had a separate 1200w Antec on those..
Couldn't have said it better myself!Quote:
People just over-do everything, you are more than fine with a 750W PSU for that card. You will never use 1200W, not even on triple SLI/CrossX
It kinda pisses me off how rediculous people get with PSU's, have you actually measured the draw of your system? no-one needs more than 1000w's and remember these are rated CONTINUOS power not even peak! Yes a 750watt will be fine, anyhow its the current draw on the rails that is the real issue. MAYBE 2 may be a bit of a strain, but I doubt it, if your worried, maybe stagger the spin-up time of the HD's as they spike a bit on spin-up but not hugely.
Yes, really necessary. You don't run PSU's are their rated max or even close to it unless you want to kill them.Quote:
Originally Posted by mcmeat51
I've got a kill-a-watt on this system and with with one GTX260 card thats turned down and idling I'm pulling a solid 650+W at 100% load on the cpu's.(2-X5680's at 4152 on air, 8-113cfm 120x25 Delta's and 3 HD)
Now imagine a couple 5770's( essentially 4 cards as they are double GPU's) OC'd and you think one 1200w PSU would hold up?
I don't and when you have that kind of money involved overkill is just right.
PSU is the backbone of a system. If peep can buy $1000 worth of GPUs and $400 for memory might as well buy a quality high Wattage PSU.Quote:
Originally Posted by mcmeat51
If the psu went south then most of the time it will took other hardwares with it:)
I learned the lesson when my always reliable Antec 500 watts took my Gforce and AMD FX with it
Now I run a Zippy-Emacs 850Watter with a 5970, (1) HDD...Thats it, don't dare and no need to add more peripherals
Me, mdzcpa and a bunch of other members found it the hardway.....http://www.xtremesystems.org/forums/...ighlight=mdzpa
At that time 600Watter considered top of the line
Just my 2cents:D
A little more;
When I was building this SR2 rig I got some advice from Peter Tan on what to use for a PSU.
I followed that advice as it agreed with my own and Peter I trust totally.
Then I learned that if I was going to toss on two 5970's I'd better get another and I really was surprised at that until I got educated by people I trust.. Fugger,chew,etc.. all said 'get a second PSU and a GOOD one"
Now I know, yea, even old dogs learn new tricks.
I run a 750w Pc Power on:
2 x 4870X2s OCed
240 gt for physx
ATI tv wonder card
I7 920 at 4.36 @ 1.325v
5 HDD, 1 SATA Bluray-rom
2 x 25cm case fans and 4 x 120mm noctuas
and a partridge in a pear tree...
The 5970 is a Hauss don't get me wrong, but it's also a newer more efficient card. It puts out better performance and less power draw than my 4870X2s...
Do me and yourself a favor, spend $20.00 at newegg and buy a kill-a-watt and tell us what that draws at full load.Quote:
Originally Posted by texasreefer
Yes, so what's your point.;)Quote:
Originally Posted by MrDiaz
Point is save for another upgrade you might need :cool:Quote:
Originally Posted by the finisher
1200w psu for peripherals and cpu + 1200w psu for graphics cards???? Are you MADD? Why should I go and buy a voltmeter to satisfy your argument? I don't have any issues with stability, heat, or power. The original question was "can i run a 5970 with a 750w corsair psu?" , and the answer is YES.
Well this issue brings up a very interesting but also common point that we've always been talking about: Do we have enough power? So far I've heard a mix up opinions so might as well joining this thread and see what do you guys think. First of all I would say that if you plan to run 2x5970 then you definitely need at least a 1000W PSU, this is tested by a member of in another forum. He tried to run 2 5970 with a Corsair HX850W and he couldn't even get 3DMark Vantage run properly and we all know how powerful the HX850W is. Secondly, I would say it depends on what kind of PSU since the total number of wattage doesn't really matter but it's more like on the single 12V rail, for me personally I would take the one with higher amps on a single 12V rail any day. I have a GTX 295 that can run just fine with my Corsair HX650W but the dude who sold me the card said he had problem running it with his 750W-800W, maybe he got a crappy PSU but I don't know. Anyway, back to my GTX 295, I have no problem running it daily but I notice that when I play some games at certain point the games started to crash, I don't think it's the driver issue since I'm pretty careful in term of this kind of thing, always use Driver Sweeper before install another driver. This plus I've heard that for some reason, even if you can assume your PSU can keep up with your video card and the rest of your system just fine assuming you just run it on a daily basis but in the long term you might run into problem and eventually the PSU can no longer provide enough juice and will die slowly, I really want an opinion on this. For me I did notice a bit sluggish in my computer overall performance down the road when I had the GTX 295 but I just did a quick test by swapping it with a 4870X2 and I can feel my computer is much more responsive. I don't have a voltmeter so I don't know how much my 2nd rig draw in total but I think down the road my system become unstable, that's probably a sign of a PSU losing its power.
Yes I agree, just being a smart ass. ;) Still you can't really have enough clean power. [w/in reason] My smallest psu for enthusiast builds is 700w.Quote:
Originally Posted by MrDiaz
The supply line from the PSU all the way back to the Main breaker box is just as important. Weaknesses add up. Advertisement says 850-900W for CF with 5970. @ max power draw that's about half of a good 15A circuit (new breaker) with nothing else on it.
You dont have to scream:)Quote:
Originally Posted by texasreefer
Its your rig and if its run fine then good for you. For me, I just learned from past experience same as Movieman too
I'm in the process of running new power to my lab, not enough amps for multiple high power rigs. 40 amps, dedicated should do it. ;)Quote:
Originally Posted by PaganII
Quote:
Originally Posted by texasreefer
No, I'm far from mad but I also make damned sure I ask the right questions of the right ( read that as knowledgeable) people before I go risking $7500.00 in parts.
As to why you should go and buy a kill a watt it's not to satisfy me but to give yourself facts not what you think.
I feel that strongly enough that PM me your paypal addy and I'll send you the $25.00 to buy it from newegg.
Hey, I don't have 1 either! :)
Using an 80A 240V breaker box to supply 120v 20A circuits with 10Ga wire. I kinda miss the lights dimming when turning on the receiver though. :)
Edit: 80A box was left over from replacing electric water heater with gas.
Yeah, don't underestimate the importance of a good PSU. I can't tell you how much you need without hooking the system up to a kill-a-watt. I can tell you with great certainty that if you're going near or above 85% rated capacity, then your ripple isn't going to be as clean as it can be. DC ripple can be the difference between a system OCing well or not also.
Yeah, sorry...my bad. I agree...the right psu for the right system is essential. I have the '750 Silencer', I like it because it has a large single rail. Had it for about 2yrs, I like the 240 gt in my system because it powers from the board, although , I don't know exactly that watage that adds to the formula. Guess I need Kill-a-Wat
I ran my dual X5680's at stock 3458 in my SM X8DA3 boardwith a GTX260 for 8 months on the same 750 Silencer you have..No issues at all, pulling app 340w..Quote:
Originally Posted by texasreefer
Same cpu's, same vid in the EVGA board at 4152 is over 650w.
A few more fans but they only account for 20w..
It really is eye opening and worth the $$ to know for sure where you stand.
True... next purchase I guess...after the laser-thermometer, those things rock
I have a Corsair 850watt powering my Wced x58 MB, 940 cpu, 6gb mem, and GTX 285 with everything OCED, stable etc.. I had a 1000 watt psu before my corsair that failed and couldnt stay stable, best way i look at it is, never go cheap, go big or go home, and get it done the right way the first time , even if that means to wait a few weeks and save up.. I am redoing my WC setup and will be running a 1000 or 1200 PSU and picking up a nice HD5850 or maybe 2 of them to run my new setup, ive spent thousands already, and its worth it to be safe then sorry :) IMO
I know a guy who runs his own PC shop, he sells all manner of components and PSU wise he sells thermaltake, hiper and some generic ones.... the MOST reliable PSU's he sells....
wait for it...
colorsIT... the cheap ones!!!!!!!