Printable View
Will get to testing later.....these are retail from newegg so nothing special about them.....
http://chew.ln2cooling.com/gskill%20...g/IMG_1528.JPG
http://chew.ln2cooling.com/gskill%20...g/IMG_1529.JPG
http://chew.ln2cooling.com/gskill%20...g/IMG_1532.JPG
http://chew.ln2cooling.com/gskill%20...g/IMG_1534.JPG
Using stock cooling.
I have my reasons.
http://chew.ln2cooling.com/gskill%20...g/IMG_1536.JPG
So anyway, hate to dissapoint you guys but I already knew these would not fare well on AMD thus why I have never reccomended them. I didn't purchase them for this system though, just figured i'd test them and break the myth/bad advice that all ram will run rated specs on all platforms.
Hitting the reboot loop point on the giga....that tells me that I need to break out phase to push further with these. Preety sure they will crack 1800 as they did so testing single sticks but not at the most optimal timings. I can tighten some of the timings more but not the 3 primaries nor does there seem to be gains doing so performance wise.......90 ns btw.....
http://chew.ln2cooling.com/qdig-file...0cpu%2032m.JPG
http://chew.ln2cooling.com/qdig-file...0cpu%2032m.JPG
Ripjaw testing cancelled.....1 stick failing test 2 in memtest underclocked........other stick is fine but can not run rated of 7-7-7 ( reboot loop with any attempt to set cas 7 )
Nice, glad to see some testing on this RAM. My Ripjaws will not do the advertised timings, but can do 8-7-6-15 just fine. Can't wait to see what a more experienced enthusiast can do with 'em.
just got my ripjaws today! along with a ud5p.. now i am just waiting on the 965be from the "simon says contest" to test em out on AMD!! cannot wait to see your results so i can compare.. :up:
this is a stupid question but
can u run ddr3-2000 on AMD platform at ddr3-2000 speeds or is ddr3-1800 highest u can go???
amd can't run ddr3-2000 due to imc limitations, so NO - they won't be able to run stock with amd
Yeah... it would be virtually impossible to get 2 GHz RAM running stable on AMD... no matter how loose the timings...
:up: like to see how they go on AMD platform :D
in last 3 years i never used AMD but maybe one day i'll back in black
cool thanks.
Ouch... that's harsh on the Ripjaws. I do not think they are very good RAM sticks...
Nah its not that they just aren't meant for AMD. Tridents advertise right on box for Intel i7 cpu's ( which is what we got the set for )Quote:
Originally Posted by Baulten
Ripjaws advertise for intel p55 chipset etc i5 cpu's.
I will try the Tridents tommorow in my asus....that tends to like 4 gig dimms + elpida based Ic's a tad better.
Okay, I'll rephrase... they aren't very good RAM sticks for AMD boards ;) It's unfortunate no one I know has a P55 board... I'd like to see if mine will do the specified settings on the right board.
Just so happens I have a p55 and i5 860 on the way and my own stash of binned powerchips ;) FYI those do run 7-7-7 1600 on AMD.Quote:
Originally Posted by Baulten
Chew* how well do these sticks fare with tweaking? I know there is no way they can run stock on AMD at this time, but do you think these will do well with tight timings, or are there cheaper/better options for AMD?
Cheaper and better options are most of the time two different things! ;)Quote:
Originally Posted by Smartidiot89
Thanks for the tests chew*! Just to get that right, Tridents are BBSE, Ripjaws are PSC, correct?
G.Skill has some serious problems with quality control on their Ripjaw kits it seems, I have read about so many DOA kits here and in some German forums...
Those are tweaked settings on the Tridents albeit not 100%. I need to toss phase on to final tune them as I can not max them out on air. Board limitation.Quote:
Originally Posted by Smartidiot89
I will give the asus a whirl.....I know that board likes elpida better and also does not hit a wall on air.
The giga tends to run a very tight ship with ram, usually don't acchieve as high an OC.
DonDan Afaik since i'm not pulling spreaders for RMA reasons ripjaws c7 1600 is PSC. Tridents from all the pics I have seen are BBSE.
sweet looking forward to your results... i recently received my trident and ripjaws for x58 and p55 as well :DQuote:
Originally Posted by chew*
Fine:p:Quote:
Originally Posted by Don_Dan
Let me rephrase, what would Chew* recommend as benching sticks I can buy? The tricky part is I know all good ICs etc. but I really have no good computerstore near me where I can handpick a few good modules... So basically I am forced to buy expensive RAM with heatspreaders :rofl: I suppose my budget is around $100-ish ofcourse cheaper is always better if possible, and I'd prefer ordering inside of EU or this shop: http://www.memoryc.com/
If you want cheap benching sticks look for these......bet money they are d9 gts....your not going to find 2x2g 1800 6-6-6 in your budget though.Quote:
Originally Posted by Smartidiot89
http://www.newegg.com/Product/Produc...82E16820148223
Little update......
Tossed the tridents in my ASUS boots 1 stick.....refuse to boot with 2.....post code d5......played with timings....etc etc no luck. Will swap out with the rest of my asus boards to see if I can get one to boot.....
Might add all my asus boards are currently pending RMA.....etc they all have issues to start with.
+1Quote:
Originally Posted by eva2000
Lets see which set is better! :D
Thanks:up: Are those guaranteed D9GTS? As said before there is no way I can go and handpick sticks:shrug:Quote:
Originally Posted by chew*
At 1.9 specced voltage they can't be much else than GTS.Quote:
Originally Posted by Smartidiot89
FYI the 2000 kits were specced 9-9-9 2000 1.9v.....
nice tests chew and great results, these are very informative to amd users
Not over yet just becasue they can't run optimal timings for AMD doesn't mean they can't be enticing ;)
OK so they don't run at the best timings for AMD but I thought i'd set the record straight that these tridents have quite a bit of potential.....
Rated 1.65, set 1.70 to offset droop, measured real 1.68....90ns still
I think there is still more in them but i'm rather tired.
Tommorows another day....
http://chew.ln2cooling.com/qdig-file...1824%2032m.JPG
very nice Chew still on the gb MB:up:
The more the merrier right?
http://chew.ln2cooling.com/gskill%20...g/IMG_1611.JPG
http://chew.ln2cooling.com/gskill%20...g/IMG_1610.JPG
True 120 clearance
http://chew.ln2cooling.com/gskill%20...g/IMG_1605.JPG
http://chew.ln2cooling.com/gskill%20...g/IMG_1607.JPG
http://chew.ln2cooling.com/gskill%20...g/IMG_1606.JPG
Xigamatek 1284 Clearance
http://chew.ln2cooling.com/gskill%20...g/IMG_1613.JPG
I did not abuse these namely due to the fact they are going into a 24/7 rig however I can honestly say this particular set will acchieve rated specs and be hassle free and set and forget on AMD providing the IMC on your cpu is up to par.
Tossed some prime at it quick at tighter than specs ( TRFC @ 90ns and 1T CR )
http://chew.ln2cooling.com/gskill%20...ting/Prime.JPG
Threw some PI at it.
http://chew.ln2cooling.com/gskill%20...esting/32m.JPG
Then I cranked the NB and core to stress the ram more....
http://chew.ln2cooling.com/gskill%20...gh%20clock.bmp
Easy Mode Bios settings.....Etc I did preety much no tuning.....voltage was set to spec 1.65v
http://chew.ln2cooling.com/gskill%20...g/IMG_1602.JPG
http://chew.ln2cooling.com/gskill%20...g/IMG_1603.JPG
This is a nice kit, G.Skill seems to have a winner here!
Is this kit specially tuned for AMDs? I assume it is... Should be the best kit for 24/7 users!
Do you know which chips are used?
Price and availability?
Seems it says designed for intel LGA1156 core i5 and i7 cpu's.Quote:
Originally Posted by Don_Dan
It however has no problem pulling rated on amd as you can see.
Looks like $89 usd and newegg has em.
http://www.newegg.com/Product/Produc...82E16820231278
Chip's not off hand did not pull spreaders. Didn't feel like chancing it. I only void warranty on hardware I intend to abuse. :p:
Interesting find, those are not available in Germany. Thanks for the post!
I should note I did not purchase these.Quote:
Originally Posted by Don_Dan
They were actually sent from gskill for winning first place in the gigabyte CPU OC % contest.
Thus the not so detailed review.
A buddy of mine is going to use them so I didn't want to beat them up on him ;)
well i am JUST getting used to AMD again. 2nd day back on it.. but this is what i have so far on water with the ripjaws(2000mhz)+amd
dice and ln2 soon... :yepp::up::D
hmm i wonder if all ripjaws are terrible i had planned on purchasing them for an upcoming review but will get the tridents if the ripjaws are bunk.
2000er RipJaws on Asus M4A79T-Deluxe
http://www.abload.de/img/2000erripjaws11g2.jpg
not yet the maximum
edit:
880 CL7 1,74v
http://www.abload.de/thumb/screen013c0ui.jpg http://www.abload.de/thumb/screen014l3dv.jpg
Nice results for Ripjaws, which CPU do you run?
Phenom II X2 550, it's stated in CPU-Tweaker. ;)
Oooops, I missed that... :rolleyes: Thanks George! :)