DFI lanparty ut P35-T2R/ E8500/ 2 stage cascade

got frustrated with my abit ix38 quad gt board and poped my e8500 to my other board.. seems like i was held back by the abit board :D :D

my gear:

dfi lanparty p35 ut t2r
c2d E8500 batch:Q741A403
silverstone zeus 850w psu
wd raptor 74gb
ati radeon x1650 pro
WD raptor 150gb

some super pi scores:

http://i163.photobucket.com/albums/t...otos/9235s.jpg

http://i163.photobucket.com/albums/t...otos/9078s.jpg

http://i163.photobucket.com/albums/t...hotos/8906.jpg

http://i163.photobucket.com/albums/t...hotos/8765.jpg

and finally i broke 5.5 ghz witch is my new personal record ;) ;)

http://i163.photobucket.com/albums/t...otos/8593s.jpg

Wow! :eek: Completely awsome Mikko!! :clap:

Keep pushing it bud, your doing a great job!!

Next time we want to see sub 7's :D

How many voltage for 5 ghz?

I have just done this with my brand new e8500. Under phase -50 celsius.

http://www.pctunerup.com/up/results/...11_5030Spi.jpg

Anyway good results.

Quote:

---

Originally Posted by [XC] Hicks121

Wow! :eek: Completely awsome Mikko!! :clap:

Keep pushing it bud, your doing a great job!!

Next time we want to see sub 7's :D

---

thanks chuck..under 7 secs with my ddr2 sticks is gonna be really hard :D

Quote:

---

Originally Posted by .p4nzer

How many voltage for 5 ghz?

I have just done this with my brand new e8500. Under phase -50 celsius.

http://www.pctunerup.com/up/results/...11_5030Spi.jpg

Anyway good results.

---

hmmm i dont really know, since i booted into windows with 5.130mhz at the first time i fired up the system :D :D

Nice chip E8500, 1.96 Vcore super.:up:

very nice results man! get some DDR3 and blow that spi score away :)

You were using only 1 stick of RAM right?

İmpressive job bro ;)

5.5 its not easy..

Quote:

---

Originally Posted by EXPANDER

Nice chip E8500, 1.96 Vcore super.:up:

---

its not that extra special.. :yepp:

Quote:

---

Originally Posted by TheKarmakazi

very nice results man! get some DDR3 and blow that spi score away :)

You were using only 1 stick of RAM right?

---

i used 2 sticks of ram

Quote:

---

Originally Posted by RockfordFosgate

İmpressive job bro ;)

5.5 its not easy..

---

thanks :up:

very nice result bro... :)
with 5.5ghz you should be able to do 8.3x with some tweaks...
maybe some photos of setup? or the cascade maybe?

Quote:

---

Originally Posted by andre X_X

very nice result bro... :)
with 5.5ghz you should be able to do 8.3x with some tweaks...
maybe some photos of setup? or the cascade maybe?

---

if i bench again tomorrow i'll try to snap so pics... if i can remember :D

Nice clock and rock Vcore on 1.968V!, Congrats :up:

Great 5.5Ghz Solarfall:clap:
I love the v-core too:D

Quote:

---

Originally Posted by ZoLKoRn

Nice clock and rock Vcore on 1.968V!, Congrats :up:

---

Quote:

---

Originally Posted by nachthymnen

Great 5.5Ghz Solarfall:clap:
I love the v-core too:D

---

thanks guys... i havent given 2.0v a try yet :D :D

Mikko- You have to use LN2 if you really are going to test ~2V ;)
I suggest not to use voltages over 1.95V. You will not have that chip for a long time if those voltages are applied.

You should test that chip with LN2. -150c wouldn't hurt i quess :D

Quote:

---

Originally Posted by SF3D

Mikko- You have to use LN2 if you really are going to test ~2V ;)
I suggest not to use voltages over 1.95V. You will not have that chip for a long time if those voltages are applied.

You should test that chip with LN2. -150c wouldn't hurt i quess :D

---

yeah i know :D :D and nope i guess -150c would not hurt... but why in odens balls name does LN2 have to be so expensive over here ??
i mean 9€ per liter is a bit too much :( :( :( :(

and petri where do you even get your ln2 ???

@Solarfall motherboard 600+ fsb good it can do :up:

E8400 1.64 Vcore 5244 MHZ FSB: 582 / DFI P35 UT T2R / SINGLE STAGE TEST

Validate: http://valid.x86-secret.com/show_oc.php?id=346970

http://img73.imageshack.us/img73/3153/5244nk5.jpg
[B]

hey EXPANDER pretty impressive clocks /fsb.. hmm i havent even tested how high fsb i can pull off with my cpu and board.. maybe i'll do that next :D

oh my....awesome mikko, you really push your "toys" to the limits, great!
(again)
:toast:

I need to get that dfi dk and torture my quad a bit :hehe:
Haven't had time for almost anything lately..

good job,yes and congratulations to your personally oc record:) !Yes i know,it feels good with 2stage cascade,isn`t it?!:D

Quote:

---

Originally Posted by Ajn

oh my....awesome mikko, you really push your "toys" to the limits, great!
(again)
:toast:

I need to get that dfi dk and torture my quad a bit :hehe:
Haven't had time for almost anything lately..

---

heheh its not fun if you dont torture your toys :D :D

Quote:

---

Originally Posted by oktay76

good job,yes and congratulations to your personally oc record:) !Yes i know,it feels good with 2stage cascade,isn`t it?!:D

---

hmmmm let me think .....................YES IT FEELS FREAKING AWESOME hehehe :D :D

mmh,i don`t know about abit,for longer times ago abit had dissapointed me,but this was 3 years ago,what do u think about abit (specially intel boards)this day and age?:rolleyes:

Quote:

---

Originally Posted by oktay76

mmh,i don`t know about abit,for longer times ago abit had dissapointed me,but this was 3 years ago,what do u think about abit (specially intel boards)this day and age?:rolleyes:

---

well for starters i cant speak for all abit boards since i've owned only 1 so far heh. the bios support could be alot better with abit boards, they dont seem to update it too often witch sucks big time.. what comes to ocing potential seems like finding the sweet spot with my ix38 quad gt board was fairly easy. the different options in bios are pretty good but the dfi boards are in there own gategory :up: i would say that when considering that my ix38 can hit 565fsb quite easilly and it don't cost too much. its a great ocing board in its price/chipset gategory ;)

thx solarfall,i `ve understand,in the time when i bought my abit, i `ve in memory too the bios was so easy to handle,yes it was easy built BIOS.....but in the main i expect dfi is just better board,yes dfi is a board for enthusiasts with some experience in the BIOS adjusting...,:)

UPDATE TIME.... i knew there just had to be few more mhz left in this chip :D:D:D:D:D:D:D

http://i163.photobucket.com/albums/t...otos/8218s.jpg

Quote:

---

Originally Posted by Solarfall

UPDATE TIME.... i knew there just had to be few more mhz left in this chip :D:D:D:D:D:D:D

http://i163.photobucket.com/albums/t...otos/8218s.jpg

---

Goooood my friend:clap:
Amazing v-core:D

wow man very nice. push it some more:up:

Quote:

---

Originally Posted by nachthymnen

Goooood my friend:clap:
Amazing v-core:D

---

lol this time around i was actually a bit worried about the vcore.. hehe i mean thats a lot for a cascade to handle and for the chip too :D .. the temps taken from the evaporator were constantly above -100c

Quote:

---

Originally Posted by natedog420

wow man very nice. push it some more:up:

---

i'll try ;)

oh yeah got some pics from my run too..sorry about the overall darkness in the pics

http://i163.photobucket.com/albums/t...s/DSCN1103.jpg

http://i163.photobucket.com/albums/t...s/DSCN1105.jpg

Damn.. and I did sold that chip away without testing :shakes:

Well, when you break 5.8GHz with it, I will be mad :D

When you will do some 3D tests?

Quote:

---

Originally Posted by SF3D

Damn.. and I did sold that chip away without testing :shakes:

Well, when you break 5.8GHz with it, I will be mad :D

When you will do some 3D tests?

---

im thinking of watercooling the nb and maybe the sb too, and use chilled water of course. so 5.7gigs here i come (hopefully) :D
about the 3d tests i will run some when i have the time.. maybe later on next week.. dunno.. i have couple of 2900xt cards waiting :D

What memory did you use and on what for settings i am looking for mem like that i am stuck on 540mhz and that aint good enough :mad:

Nice...

So i guess you like that board a lot right?

Awesome speeds man :up: I have just about the same setup and I'm at 570fsb.
Can you share your

Voltage settings - ;)

CPU VID - OBVIOUS -
CPU VID SPECIAL ADD -
DRAM VOLTAGE -
SB 1.05V VOLTAGE -
SB CORE/CPU PLL VOLTAGE -
NB CORE VOLTAGE -
CPU VTT VOLTAGE -
VCORE DROOP CONTROL -
CLOCKGEN VOLTAGE CONTROL -
GTL+ BUFFER STRENGTH -
HOST SLEW RATE -
GTL REF VOLTAGE CONTROL -
CPU GTL 1/3 REF VOLT -
CPU GTL 0/2 REF VOLT -
NORTH BRIDGE GTL REF VOLT -

haha looks like you won't sleep while you are testing :D pretty nice E8500 kickin' here :clap:

Nice scores Solarfall :up: , the board u are using is not good for E8500, so u have potential for 615 or even 620mhz for fsb on 965 board. Did u try with only one core?

Quote:

---

Originally Posted by AmdForLife

What memory did you use and on what for settings i am looking for mem like that i am stuck on 540mhz and that aint good enough :mad:

---

i have cellshock ddr2 pc8000 2 gb.. these stick work strangely with this board, they seem to need a lot of juice to clock well with this board

Quote:

---

Originally Posted by drizzt5

Nice...

So i guess you like that board a lot right?

---

hmmm yes you could say that :D :D :D :D

Quote:

---

Originally Posted by runmc

Awesome speeds man :up: I have just about the same setup and I'm at 570fsb.
Can you share your

Voltage settings - ;)

CPU VID - OBVIOUS -
CPU VID SPECIAL ADD -
DRAM VOLTAGE -
SB 1.05V VOLTAGE -
SB CORE/CPU PLL VOLTAGE -
NB CORE VOLTAGE -
CPU VTT VOLTAGE -
VCORE DROOP CONTROL -
CLOCKGEN VOLTAGE CONTROL -
GTL+ BUFFER STRENGTH -
HOST SLEW RATE -
GTL REF VOLTAGE CONTROL -
CPU GTL 1/3 REF VOLT -
CPU GTL 0/2 REF VOLT -
NORTH BRIDGE GTL REF VOLT -

---

sure i'll post them later on today, (its 5.25am and im just about to leave to work)

Quote:

---

Originally Posted by SoF

haha looks like you won't sleep while you are testing :D pretty nice E8500 kickin' here :clap:

---

hehe yep sleeping is overrated :D

Quote:

---

Originally Posted by Misko

Nice scores Solarfall :up: , the board u are using is not good for E8500, so u have potential for 615 or even 620mhz for fsb on 965 board. Did u try with only one core?

---

im aware of this little fact, maybe i'll hunt down a 965 board.. the commando seems to be pretty good :D

btw i ran some prime too lol i forgot to post it lastnight..

http://i163.photobucket.com/albums/t...rime14422s.jpg

[QUOTE=Solarfall]
i used 2 sticks of ram
[QUOTE]

You may squeeze out some extra time in SPi1M if you only use 1 stick of RAM

Good clock. pls 3dmark2001 test :up:

[QUOTE=TheKarmakazi;2934926][QUOTE=Solarfall]
i used 2 sticks of ram

Quote:

---

You may squeeze out some extra time in SPi1M if you only use 1 stick of RAM

---

havent heard of that one before.. hmm maybe its worth a try.. thanks for the tip :up:

Quote:

---

Originally Posted by EXPANDER

Good clock. pls 3dmark2001 test :up:

---

sure thing

Quote:

---

Originally Posted by runmc

Awesome speeds man :up: I have just about the same setup and I'm at 570fsb.
Can you share your

Voltage settings - ;)

CPU VID - OBVIOUS -
CPU VID SPECIAL ADD -
DRAM VOLTAGE -
SB 1.05V VOLTAGE -
SB CORE/CPU PLL VOLTAGE -
NB CORE VOLTAGE -
CPU VTT VOLTAGE -
VCORE DROOP CONTROL -
CLOCKGEN VOLTAGE CONTROL -
GTL+ BUFFER STRENGTH -
HOST SLEW RATE -
GTL REF VOLTAGE CONTROL -
CPU GTL 1/3 REF VOLT -
CPU GTL 0/2 REF VOLT -
NORTH BRIDGE GTL REF VOLT -

---

here you go :up:

http://i163.photobucket.com/albums/t...s/DSCN1113.jpg

:D thanks :up: I will see if that helps me.

did some quick 3dmark benching today.. sorry i had time for only 01, maybe later on i will post other 3dmark scores too..

http://i163.photobucket.com/albums/t...22803dmark.jpg