Big Mama LN2 Dewar arrival party E6850 + Gigabyte X38 + Corsair PC10K = 5.35Ghz 2D/3D

hi guys

TEAM.AU Strikes again!

i bought a s/h dewar and thought i'd give it a crack yesterday. The plan was to bench XFX 780i with tripple 8800GTX in tri-sli with QX9650 but things went bad after changing from water to LN2. After struggling with the setup for half hour on LN2 it stopped working.......after some hair dryer action etc all parts tested ok but it was time for Josh (moloko) to go and so did all the nice goodies

well that wasn't going to stop me having some fun with some of my gear :D :up: so i chucked together my favourite setup and went for it quickly :)

Can't help myself and i have to say this would be a fitting soundtrack if i had time for the youtube video edit FINAL COUNTDOWN hahaha <<loves that song and solo>>

Test Configuration:
Gigabyte X38-DQ6 DDR2 Motherboard (F3 bios)
Intel Core 2 Duo E6850 720Axxx
2GB DDR2 Corsair Dominators PC10000
Single 8800GT PCIe 2.0 512MB Graphics Card (Stock cooler)
Corsair HX620 Power Supply
Kingpin Dragon Evo 2.4 Superpot :D ... soon to meet younger bro F1 Extreme that santa is delivering :D :D
Big Mama 35L MVE LN2 Dewar
80GB Samsung SATA Hard Drive
Windows XP Pro 32bit

I was limited to 1.79v idle and 1.76-1.77v under load in vcore due to OVP on the mobo....gotta remove that lol but i maxed out the FSB on the chip anyways

i benched the GFX at only 700MHz core and 922-999 on RAM


BIG MAMA in the house
http://img180.imageshack.us/img180/5386/img1654gc2.jpghttp://img179.imageshack.us/img179/7578/img1686pi3.jpg
http://img179.imageshack.us/img179/8343/img1639fu1.jpg


Did a quick 8M SuperPi (don't mind the time)
http://img183.imageshack.us/img183/3...superpilm5.jpg



3DMARK03 run at 5.3GHz on YOUTUBE
this was the first run no tweaks and bad strap on RAM plus really loose subtimings
also auto gfx settings so result is not what i was going for
plan was to see if i can make it run 3D that high in such a short period

http://img183.imageshack.us/img183/5...345268ppg3.jpg


3DMARK05 = 27,090 points (had to submit direct but Futuremark is down atm)


AQUAMARK 3
http://img340.imageshack.us/img340/8...265527puk7.png

3DMARK01 (87K pretty decent considering the GPU clocks)
http://img338.imageshack.us/img338/8...6996p88zd8.png

1M SuperPi 9.531s @5345MHz
http://img166.imageshack.us/img166/2...rpi9531kk0.png

32M SuperPi 9m 33.061s @5350MHz
http://img177.imageshack.us/img177/3...i32m9m3uk1.png
http://img186.imageshack.us/img186/2...i32m9m3vo1.png


GIGABYTE BOARD SWIMMING IN WATER AND PERFORMING LIKE A TRUE CHAMP
http://img509.imageshack.us/img509/5123/img1716rl3.jpg
http://img174.imageshack.us/img174/8516/img1712lz7.jpg
http://img165.imageshack.us/img165/5703/img1711zc3.jpg


dinos22 :up:

first i ran down Pro's E6850 32M time on dry ice and now you go and post this. do you think the the cross-hairs are not going to find you? i'm coming for ya Dinos...me and my dry ice are coming :D

awesome work and a very nice looking dewar. not in appearance of course but in capacity ;). those waterworks shots of the board are priceless, your going to have to start benching in a tub to keep the mess to a minimum...keep up the good work man :up:

hahahah i bought an Asus X38 P5E3 DLX from OBP so now i'll start to tweak some monster runs too :D

there'll be plenty of backups :D

Quote:

---

Originally Posted by dinos22

hahahah i bought an Asus X38 P5E3 DLX from OBP so now i'll start to tweak some monster runs too :D

there'll be plenty of backups :D

---

hehe, i see your P5E3-Dlx and raise you an Asus Maximus Extreme and a kit of TWIN3X2048-1800C7DFIN, and lets not forget about the Ballistix which have already proven their worth on P35. looks like we have the makings for one heavyweight 32M bout...ding ding :D

http://www.xtremesystems.org/forums/...&postcount=182

Awesome stuff Dinos, just the thread to kick me in the backside to get moving with my monster benching marathon ;) Might try a E6850 in my Gigabyte X38-DQ6 to see if it can boot up properly - hope my X38-DQ6 isn't down for the count still heh

What's the full batch details on E6850 again L720A??? ? :)

what did the wife think of the dewar purchase ? :)

Shame about triple-SLI issues :(

This Dewar not for long storage of liquid nitrogen. This Dewar need for transportation of sperm of animals! :yepp: Therefore at it such thick aperture and capacity for immersing in nitrogen :D

Very nice results dude! :)

Good start, looking forward to see the rest :D

Quote:

---

Originally Posted by Nordling

This Dewar not for long storage of liquid nitrogen. This Dewar need for transportation of sperm of animals! :yepp: Therefore at it such thick aperture and capacity for immersing in nitrogen :D

---

LOL :D :D

Quote:

---

Originally Posted by eva2000

What's the full batch details on E6850 again L720A??? ? :)

---

im sure its his new 745 ;)

...

nice results dinos, cant wait too see the chip maxed out :up:

damn thats alot of wateeeer ;)

hahah thanks guys

nordling i bought it from a veterinary hospital (sperm dewar) w00t :D

i have the board coated in LET (Liquid Electrical Tape) two coats and in Sydney it gets toasty being summer and all lol but i've never killed a board (fingers crossed)

eva it's 745

oh btw this chip WAS maxed out

i also benched with 6 multi and no gain in FSB at all...same as 9x so more vcore would not gain me anything :(

i do have another chip coming in january which should easily bench way past 600 on LN2
that should be very interesting

already the effect of australian internet censor is having its effect :rofl:

nice run there dinos!

you lost me on the internet sensor comment
thanks for compliments :D

this dewar is amazing

i left it alone for 24 hours to see what the evaporation rate is
maaaaaaaaaaaaaaaan...i don't think anything left the tank at all :eek: :thumb:
me=happy :D

Looks really good and cool video while running + some cool pics.

Like Marc says, there is alot of water there, but good you use LET.

Keep pushing it, looking forward to your 600fsb gem.

i just realised i had maxmem for all the 3d runs
no good....that will also give a boost in numbers
but no point benching on stock air

i think i might buy some ATI cards as they seem fun to bench with and you can use the heatsink and stick a watercooler on it which is swell

was 594.5fsb is the max fsb?

Love the video's, keep em coming

Nice benchin bro,cant weait to see your results with those 2 high fsb cpus you got from opb....

Your dewar looks like the one Ive been using, its not mine though I jsut borrow it from the ln2 supplier.... I can sure use those wheels as it gets pretty heavy when full.....
http://ocidb.com/albums/userpics/100...670_-_Copy.JPG

thanks guys

Quote:

---

Originally Posted by coolice

was 594.5fsb is the max fsb?

---

i jumped to 600 and it was an instant freeze with highest and lowest multi so yeah

Holy crap, you werent lying, it acctually is for animal sperm, rofl

even I like your pics very much I would prefer some thumbs as reading while scrolling sidewards sucks :p:
Nice run but looks like you need my magic E6850 for more action :D :D :D

Quote:

---

Originally Posted by SoF

even I like your pics very much I would prefer some thumbs as reading while scrolling sidewards sucks :p:
Nice run but looks like you need my magic E6850 for more action :D :D :D

---

I have no problems reading the thread in a small window. you just need to get a bigger monitor.

Quote:

---

Originally Posted by safan80

I have no problems reading the thread in a small window. you just need to get a bigger monitor.

---

maybe he's using a 15" LCD EEK heh

left the dewar for 8-9 days and after checking the level i only saw about 1-1.5cm LN2 drop

that's pretty good
really happy with that actually :D

That's awesome. I've never even tried leaving it for that long but I've always meant to. Well over a week of nearly perfect hold time sounds great.

yeah i'm thinking of always having it filled up with LN2 so that i never have to run out if the urge is there :rofl:

but yeah i'll keep an eye out some more

my ln2 delivery guy told me it's also better to have these filled with LN2 even if not much is in there because if they get emptied and warm up and then you keep cooling them down the top neck area on the inside starts to crack from stress :shrug:

Quote:

---

Originally Posted by dinos22

yeah i'm thinking of always having it filled up with LN2 so that i never have to run out if the urge is there :rofl:

but yeah i'll keep an eye out some more

my ln2 delivery guy told me it's also better to have these filled with LN2 even if not much is in there because if they get emptied and warm up and then you keep cooling them down the top neck area on the inside starts to crack from stress :shrug:

---

Well I know I would listen to the guy :up: makes sense anyway.

Plus that way you know its nice and cold for next time you want to go, and like you say, it may be worth keeping it full.

Hey man if you dont mind me asking whats it worth for dewar and to fill it?

Quote:

---

Originally Posted by The0men

Hey man if you dont mind me asking whats it worth for dewar and to fill it?

---

if you live in Sydney i'll hook you up with a guy that charges me $62 delivered for 34L EEK :D

O thats not as expensive as I thought. Not planning on really using any, was just curious how much it cost's. I'm from melb, but I see a little l2n VAN mostly on the way home from work. I guess if I ever got some pots, and got keen I'd just give that guy a bell. I was just curious as to what it's worth.

Quote:

---

Originally Posted by The0men

O thats not as expensive as I thought. Not planning on really using any, was just curious how much it cost's. I'm from melb, but I see a little l2n VAN mostly on the way home from work. I guess if I ever got some pots, and got keen I'd just give that guy a bell. I was just curious as to what it's worth.

---

can you please give that guy a bell so we have a melbourne contact in case any of the Xtreme guys need a good supplier

or just get the details and we'll call him :) :up:

Yer no probs, next time I see the little van I'll take the number and give him a bell.

i've got a chip capable of 650MHz FSB just trying to get a voltmod for vcore and OVP now for P5E3 DLX and figure out how the :banana::banana::banana::banana: i downgrade the bios to 0504 so that i can run slightly better RAM speeds and 1T on DDR3

it should be good on LN2

i REALLY want to do some SuperPi damage here
http://www.hwbot.org/quickSearch.do?...%29+%284139%29

:D

Quote:

---

Originally Posted by dinos22

i've got a chip capable of 650MHz FSB just trying to get a voltmod for vcore and OVP now for P5E3 DLX and figure out how the :banana::banana::banana::banana: i downgrade the bios to 0504 so that i can run slightly better RAM speeds and 1T on DDR3

it should be good on LN2

i REALLY want to do some SuperPi damage here
http://www.hwbot.org/quickSearch.do?...%29+%284139%29

:D

---

Sounds good about your dewar.

Lookin forward to some SPI damage ;).

Keep pushing it.

tested 575MHz superpi stable MHz on the chip on water so looking good for about 625MHz cold benches and another 10-15Mhz for screens it seems

we'll see :D

Quote:

---

Originally Posted by dinos22

can you please give that guy a bell so we have a melbourne contact in case any of the Xtreme guys need a good supplier

or just get the details and we'll call him :) :up:

---

If u dont mind passing that number on, it will be helpfull :up:

Quote:

---

Originally Posted by n3wbi3

If u dont mind passing that number on, it will be helpfull :up:

---

hehe at least one Melbournian ready to pounce :up:
you get your new KP pot?
he's making a new batch of F1s soon

lol

Nah not yet buddy, i seen his extreme version which i might say :eek:
just playing the waitng game for the high end cards to come out so then i can start some benching, plus new yrs and christmas just passed which put a huge hole in my pocket lol

hehehe i can understand that

Vince is sending over the new F1 EE my way for some LN2 pwnage :D

Quote:

---

Originally Posted by n3wbi3

lol

Nah not yet buddy, i seen his extreme version which i might say :eek:
just playing the waitng game for the high end cards to come out so then i can start some benching, plus new yrs and christmas just passed which put a huge hole in my pocket lol

---

Where abouts in melb are you n3wbi3 (sorry dinos for attempted hijacking thread lol)

Man I just got my new watercooling gear. I decided I might get some cable management and tidy it up aswell.. Plus getting this tripple rad to fit in the front of my armor might be a bit tricky.

Anyway, I better gat back to it, got a fair job on my hands.

Quote:

---

Originally Posted by dinos22

left the dewar for 8-9 days and after checking the level i only saw about 1-1.5cm LN2 drop

that's pretty good
really happy with that actually :D

---

thats not bad, here at work we have large 200L dewars of LN2, and also the smaller ones like yours. The smaller ones (if the stopper is good) will hold for ~2 weeks with ~1cm drop. Yours is not bad though.

And yes its better to not let it be fully emptied and warm up - even just a cm or 2 in the bottom - heating/cooling stress isnt good for the inner lining.

Quote:

---

Originally Posted by Timbosan

thats not bad, here at work we have large 200L dewars of LN2, and also the smaller ones like yours. The smaller ones (if the stopper is good) will hold for ~2 weeks with ~1cm drop. Yours is not bad though.

---

ZOMG
where do you work
can i work there too :D
they wouldn't mind if i bring in some gear for testing at lunchtime would they :ROTF:

Quote:

---

Originally Posted by dinos22

hehehe i can understand that

Vince is sending over the new F1 EE my way for some LN2 pwnage :D

---

so so so tempted to send him a quick email to order 1 as well mmmmmmmm thinking .....

cant wait to see some pics mate :up:

Quote:

---

Originally Posted by The0men

Where abouts in melb are you n3wbi3 (sorry dinos for attempted hijacking thread lol)

---

port melb buddy, next to the city, ur self?

Quote:

---

Originally Posted by n3wbi3

so so so tempted to send him a quick email to order 1 as well mmmmmmmm thinking .....

cant wait to see some pics mate :up:

Quote:

---

Originally Posted by The0men

Where abouts in melb are you n3wbi3 (sorry dinos for attempted hijacking thread lol)

---

port melb buddy, bext to the city, ur self?

---

Down on the mornington peninsula lol. Somers. Kinda rural town. Take it easy.

Quote:

---

Originally Posted by dinos22

ZOMG
where do you work
can i work there too :D
they wouldn't mind if i bring in some gear for testing at lunchtime would they :ROTF:

---

Uni - Chemistry department :)

got so much LN2 and DICE i really should do some sub zero benching. i have a pot....its crap though & i know nothing about insulating things. id kill everything lol. It sucks when none of your mates are into overclocking.

Quote:

---

Originally Posted by Timbosan

Uni - Chemistry department :)

got so much LN2 and DICE i really should do some sub zero benching. i have a pot....its crap though & i know nothing about insulating things. id kill everything lol. It sucks when none of your mates are into overclocking.

---

errrrr please tell me you're from sydney :shocked: :D

even better please say ur from melb.....
DINOOOOO hands off his mine lol :p:

Quote:

---

Originally Posted by dinos22

errrrr please tell me you're from sydney :shocked: :D

---

only about one hour south-er (depending on who's driving lol). Im from Wollongong. Where are you at?

Quote:

---

Originally Posted by n3wbi3

even better please say ur from melb.....
DINOOOOO hands off his mine lol :p:

---

lol i wish i lived near people who do this stuff. im probably like the only person in wollongong who owns a conroe system lol

lol sydney (hurstville)

yeah 1hr to wollongong sounds reasonable hahahah

Quote:

---

Originally Posted by dinos22

lol sydney (hurstville)

yeah 1hr to wollongong sounds reasonable hahahah

---

mad your so close. Next time somethings going on we should meet up or something, or we should just hang out & have beers & OC :) thats if you would permit a n00b like myself anywhere near you of course lol.

Bugger still looks like ill br driving to my local B.O.C shop.

Dino free ln2 and dice and all u have to do is teach him how to insulate and bench, sounds like fair deal to me :up:

Timbosan: u could always move to melb :eek:

Quote:

---

Originally Posted by n3wbi3

Timbosan: u could always move to melb :eek:

---

you never know. im waiting on funding confirmation to start my PhD at wollongong university, but if that falls through i could be doing anything - i'll need full time work so i'll take whatever suits me best wherever that may be :)

good luck with ur schooling :up:

Am looking for a dewar any chance ur schools department have a got something they r about to throw out?
Finding it hard to find 1 :(

Quote:

---

Originally Posted by Timbosan

mad your so close. Next time somethings going on we should meet up or something, or we should just hang out & have beers & OC :) thats if you would permit a n00b like myself anywhere near you of course lol.

---

yeah no worries
we had an OC bash on saturday
i'll let you know if something comes on :up:

Quote:

---

Originally Posted by n3wbi3

good luck with ur schooling :up:

Am looking for a dewar any chance ur schools department have a got something they r about to throw out?
Finding it hard to find 1 :(

---

Thanks mate. Dewar - dont think so but i'll ask around and if so i'll let you know for sure :up:

Quote:

---

Originally Posted by dinos22

yeah no worries
we had an OC bash on saturday
i'll let you know if something comes on :up:

---

That would be awesome, cheers :)

Quote:

---

Originally Posted by n3wbi3

good luck with ur schooling :up:

Am looking for a dewar any chance ur schools department have a got something they r about to throw out?
Finding it hard to find 1 :(

---

ring up VET hospitals dude ;) and ask around
:up:

Awesome, but remember common sense when buying a used one:

1. Best to pressure test it first to check for air leaks (otherwise, if it leaks, you could die.............generally thought of as a bad thing). You losing that little probably means you're fine.

2. Best to use it in a well ventilated area (ie. tunnel of air in and out)

3. Be extremely careful handling the ln2. Burns = teh bad. Protection over exposed skin and eyes recommended.

4. Use it enough to smash every record you can ;)

I highly doubt dinos22 needs to be reminded of this, but it's good info for anyone looking to get into this.

Quote:

---

Originally Posted by THE JEW (RaVeN)

Awesome, but remember common sense when buying a used one:

1. Best to pressure test it first to check for air leaks (otherwise, if it leaks, you could die.............generally thought of as a bad thing). You losing that little probably means you're fine.

2. Best to use it in a well ventilated area (ie. tunnel of air in and out)

3. Be extremely careful handling the ln2. Burns = teh bad. Protection over exposed skin and eyes recommended.

4. Use it enough to smash every record you can ;)

I highly doubt dinos22 needs to be reminded of this, but it's good info for anyone looking to get into this.

---

yeah i was aware but you are right it's good to always remind people

also if you are benching on tiles wear some SHOES hahahah :D (no joke) heh

i have a dungeon i bench in and leave the front door open and have a pedestal fan behind me hammering the room to get some air circulating and pushing out of the room

i did have some reservations but i think it should be fine

burns under the toes are not nice :(

[QUOTE=Timbosan;2686267]Thanks mate. Dewar - dont think so but i'll ask around and if so i'll let you know for sure :up:QUOTE]
cheers :up:

Quote:

---

Originally Posted by dinos22

ring up VET hospitals dude ;) and ask around
:up:

---

will do buddy :up:

Quote:

---

Originally Posted by T_M

burns under the toes are not nice :(

---

i read about that, how the hell did u have a pool of ln2 lying around lol