XtwinZ TeamHungary takes E8400 WR again @ 5412Mhz w/ 610FSB (update)

I got my new cpus (2pcs E8400) last week, and we (Achill3uS, jugeen, over@locker886(me)) decided do DI bench at weekend.

System:

-MB’s model name: Foxconn Mars P35
-BIOS version: 11/14/2007
-CPU type and model: Intel Woldale E8400ES@ 1,75v
-Cooling: Dry ICE + LittleDevil LN2/DICE pot Rev:3.0 :)
-Memory model name, quantity: 2*1GB Crucial Ballastix 8500 @2,56v
-VGA card’s model name and driver version: ATI Radeon 7000 PCI
-Power Supply mode name: PC Power & Cooling 750W
-HDD drives: 15GB Quantum Fireball
-Optical drives: IDE interface Plextor PX-716A
- Operating system and service pack level: Windows 2003 tweaked

New E8400 WR - valid
http://valid.x86-secret.com/cache/274018.png


New FSB WR with 45nm cpu - valid

http://valid.x86-secret.com/cache/273130.png

Superpi 1M

http://img530.imageshack.us/img530/9371/1m3webun6.jpg

Superpi 32M

http://img339.imageshack.us/img339/2794/32m4webqq9.jpg


Regards,

XtwinZ TeamHungary

Pics from system:

http://img508.imageshack.us/img508/7051/kep1cx8.jpg

http://img251.imageshack.us/img251/2825/kep2fk9.jpg

http://img520.imageshack.us/img520/9886/kep3wd3.jpg

http://img444.imageshack.us/img444/6066/kep4sg2.jpg

http://img520.imageshack.us/img520/4862/kep6fz6.jpg

i hope we will do higher scores soon. it was good fun :)

Great work guys :D

Are you sure nobody did more that 590 fsb with a yorksfiled?
Think I saw 615 or more at some point in time

Very good performance ratio on SuperPI - 9.032 * 5104.7 = 46099! Congratulations!

what kind of volts did you use? and not just vcore

This CPUs are sweet, what did it do on air?

Quote:

---

Originally Posted by Nosfer@tu

Great work guys :D

Are you sure nobody did more that 590 fsb with a yorksfiled?
Think I saw 615 or more at some point in time

---

Thanks! I didn't see more..If you can show ,please share ,when off course no WR..:)

Quote:

---

Originally Posted by tiborrr

Very good performance ratio on SuperPI - 9.032 * 5104.7 = 46099! Congratulations!

---

Thank you very much!!:)

Quote:

---

Originally Posted by metro.cl

what kind of volts did you use? and not just vcore

This CPUs are sweet, what did it do on air?

---

what you interest? :)

Nb voltage 1,89v
cpu vtt: 1,575v
sb&pll: 1,92v

I don't know exactly yet ^^

Quote:

---

Originally Posted by Nosfer@tu

Great work guys :D

Are you sure nobody did more that 590 fsb with a yorksfiled?
Think I saw 615 or more at some point in time

---

but this is wolfdale mate :)

it was a great fun guys :toast:, here are my results:

CPU: Intel Woldale E8400 C0 ES
Mobo: Asus Blitz Formula (1205)
Memory: 2GB Crucial Lanfest 800
VGA: ATI 7000 PCI
Cooling: DI + my pot rev1.1
PSU: PcPower&Cooling Silencer 750W
OS: Win XP Pro tweaked
Voltages: vcore: 1.70v | vnb: 1.70v | vdimm: 2.56v | vtt: 1.60v | vpll: 2.0v | vsb: 1.20v

validation 5047MHz

pics

http://img514.imageshack.us/img514/388/foto2rg6.jpg

1M

http://img526.imageshack.us/img526/7633/06ar8.jpg

The Asus mobos as i heard has got an fsb problem with wolf's around 550-580fsb, and i think i hit that too... but one more time i will try in the week on DI this newbie :D
regards

Great !!! This will be my next CPU

Do you know how much Vcore it needs for 4 Ghz on Air ?

nice chip my friend and keep pushing-->8.XXXsecs :)

Really impressive chips there guys.

Have you tried to disable 1 core?.

Keep pushing it.

wicked fsb on the wolfie mate :up:.. congrats on the WR :toast:

Great run guys :up:

We thanks all congratulation guys! :toast:

Quote:

---

Originally Posted by Den Leiw

Great !!! This will be my next CPU

Do you know how much Vcore it needs for 4 Ghz on Air ?

---

I don't know exactly what can run these chip on air.
I'm very busy, but I'll check at weekend!;)

Quote:

---

Originally Posted by PcCI2iminal

nice chip my friend and keep pushing-->8.XXXsecs :)

---

Thanks, I'll :)

Quote:

---

Originally Posted by Oliver

Really impressive chips there guys.

Have you tried to disable 1 core?.

Keep pushing it.

---

Achill3uS-mate tested yesterday, and he got +25Mhz gain! (5125Mhz 1M)
Coming soon he will upload!

Quote:

---

Originally Posted by Solarfall

wicked fsb on the wolfie mate :up:.. congrats on the WR :toast:

---

Quote:

---

Originally Posted by Misko

Great run guys :up:

---

Thanks my friends! ;)

Nice clocks there, wish I had an E8400 or E8500 to play with like you guys :up: Why the insane vdimm though? Running 4-4-4-12 I assume?

Great work. Will be interested to see how people get on with LN2 and these chips

Congratulation.
Im very impressed. Really nice cpu-s insane cloks.
Good team.
Well done friends:clap: :up: :)

Quote:

---

Originally Posted by over@locker886

Achill3uS-mate tested yesterday, and he got +25Mhz gain! (5125Mhz 1M)
Coming soon he will upload!

---

you told my secret bro :D:p:

so here are the results with one core, gained around 100mhz to my first run, maybe because of luck, but sure one core disabled helps much...
btw, interesting that over's run was faster than mine, dont think he used some tweaks what im not, and his server cant be faster so much than my XP,
so maybe the Mars is faster than the Blitz :shrug:

CPU: Intel Woldale E8400 C0 ES
Mobo: Asus Blitz Formula (1205)
Memory: 2GB Crucial Lanfest 800
VGA: ATI 7000 PCI
Cooling: DI + my pot rev1.1
PSU: PcPower&Cooling Silencer 750W
OS: Win XP Pro tweaked
Voltages: vcore: 1.75v | vnb: 1.75v | vdimm: 2.56v | vtt: 1.68v | vpll: 2.0v | vsb: 1.20v
timings: 4-4-4-4-4-25-4-4-4, boost 1, perf level 8

Validation 5126MHz
Max fsb 6x multi on Asus Blitz

1M

http://img512.imageshack.us/img512/4...61machipf5.jpg

Pifast

http://img214.imageshack.us/img214/2...astachihe4.jpg

around the weekend or next week ln2 :up:

Quote:

---

Originally Posted by Achill3uS

you told my secret bro :D:p:

around the weekend or next week ln2 :up:

---

hehe, I think next weekend!;)

OMG OMG 5.1GHz, 1.75v on DICE, now I want one even more as these are gonna be really cheap too. :D

Looks like it's good for 4.3GHz+ with 1.5v or less on air I'd guess.

Quote:

---

Originally Posted by over@locker886

Thanks! I didn't see more..If you can show ,please share ,when off course no WR..:)

---

Sry :( I dident mean to take away your pride :shakes: :eleph:
I just assumed that you ment 45 nm in genneral WR and Yorkie is 45 Nm also.
But a Wolfdale WR it is for sure guys ;)

Asus Blitz + Wolfdale E8400 Watercooled results

Mobo: Asus Blitz Formula (1205)
CPU: Wolfdale E8400 ES
RAM: 2GB OCZ Reaper PC2 9200
VGA: ATI 7000 PCI
Cooling: Custom Watercooling
PSU: PcPower&Cooling Silencer 750W

4696MHz Validation 1.65v

1M

http://img443.imageshack.us/img443/8805/sub101mmc4.png

system

http://img156.imageshack.us/img156/3150/oczrz9.jpg

regards

oh damn that chip of yours is awesome, 4647mhz with watercooling .. jeez man :eek: :toast:
what were the temps when you ran ur chip at those speeds Achill3uS ??

Great CPU power for a 172 EUR part, can't wait to pick up one. :yepp: :toast:

With Penryn clocking this nicely, it would suck to be a diehard AMD fanboy right now.

Nice CPU, already asked you for selling it to me, but nevermind :) .

Keep up the good work ;) .

Quote:

---

Originally Posted by Solarfall

oh damn that chip of yours is awesome, 4647mhz with watercooling .. jeez man :eek: :toast:
what were the temps when you ran ur chip at those speeds Achill3uS ??

---

Thanks mate :)
The tepms was around 40C under 1M running (@1.65v), but the coretemp could monitor only the first core, the second is allways at 33C lol :D
But there is one thing i didnt realize... another guys who are running E8400 around 4.6G on air, is theirs chip stable 4G around ~1.3v, but mine is p95 stable w/ only 1.416v :rolleyes:

Thank you all guys your kind words :toast:

Really nice results guys. :up:

Regards

Quote:

---

Originally Posted by LittleDevil

Really nice results guys. :up:

Regards

---

Thank you very much! :toast:

guys :eek:
awesome bench table, where you find it :D:D :p:

results are great to btw :up:

damn my pocket cant keep up with intel!

wow 5ghz id be happy with 4, nice and wtf to that nb cooler that things huge.
any way wicked stuff, ur the man

i need to get one of these and a new mobo, fsb hole on my board from 425->infinity is killing me lol

Quote:

---

Originally Posted by dduckquack

damn my pocket cant keep up with intel!

---

Totally understand wat you mean!! :p:
But guys nice DI benching and very nice chip :up:

4Ghz for 24/7 on air video

Easy to claim a WR when noone else has the cpu lol :)
nevertheless sick results looks promising :D

excellent work guys :)

I'm buying this chip too when it's avaible in Europe :D
How does this chip perform on a p35 chipset?

Quote:

---

Originally Posted by dinos22

excellent work guys :)

---

Thank you dinos22! Next week we will push harder:D ;)

Quote:

---

Originally Posted by MorGo7h

I'm buying this chip too when it's avaible in Europe :D
How does this chip perform on a p35 chipset?

---

All results was born with p35...

push push push :D

shame there are not many of these CPUs around

this is the only one i've seen bench past 560 too

with 1.7 volts i would hope it went that high lol

Quote:

---

Originally Posted by over@locker886

All results was born with p35...

---

My bad :p
I didn't see you were using a P35 board :shakes:
Tought it was x38 :p

Can you use half multipliers with E8400? I tried one on my Gigabyte Board and can only use the full ones.

Have you tried giving more than 1.75V to the cpu?

Nice mate , gratulalok :) . I did not read all the replays , i look only at numbers :D Foxconn it's stock or moded ?

i told myself to get the new quad but this is very tempting

Quote:

---

Originally Posted by bonzo_catalin

Nice mate , gratulalok :) . I did not read all the replays , i look only at numbers :D Foxconn it's stock or moded ?

---

it is stock :up:

Quote:

---

Originally Posted by RPGWiZaRD

Great CPU power for a 172 EUR part, can't wait to pick up one. :yepp: :toast:

With Penryn clocking this nicely, it would suck to be a diehard AMD fanboy right now.

---

I love AMD and I love ATI, I just :banana::banana::banana::banana: Intel ;)

Quote:

---

Originally Posted by olDirdey

Can you use half multipliers with E8400? I tried one on my Gigabyte Board and can only use the full ones.

---

We not tried yet. But Half multipliers working in Asus;)

Quote:

---

Originally Posted by rick_fx

Have you tried giving more than 1.75V to the cpu?

---

Not yet. We didn't want push more with DI! Next time LN2!:)

Man, I really wanted to buy this chip once it comes out, but I was hoping at least 4.5Ghz on air! With my E6750 i can run almost 4Ghz prime stable using U-120 Extreme.
Kind a turn off :(

Nonetheless, Great job with that chip! ;)

Very nice work. :toast:

I'm waiting to see some in case results from someone who has these chips after you finish your LN2 record attempting runs because 24/7 like people run is not open bench at all and add 15-20C to the CPU temps you see there and you won't be getting even 4GHz stable and cool enough to run by that standard. Plus NB/MOS/DIMM will also run a lot hotter inside a case with GPU/HDD and so on and you don't eactly run noisy delta fans inside a 24/7 case either. Better cooling and open top we know Wolf will do many MHz by now judging from just Yorky alone.
So it looks like 2-350MHz more 24/7 than C2D with the same cooling is on the cards.

Quote:

---

Originally Posted by KTE

Very nice work. :toast:

I'm waiting to see some in case results from someone who has these chips after you finish your LN2 record attempting runs because 24/7 like people run is not open bench at all and add 15-20C to the CPU temps you see there and you won't be getting even 4GHz stable and cool enough to run by that standard. Plus NB/MOS/DIMM will also run a lot hotter inside a case with GPU/HDD and so on and you don't eactly run noisy delta fans inside a 24/7 case either. Better cooling and open top we know Wolf will do many MHz by now judging from just Yorky alone.
So it looks like 2-350MHz more 24/7 than C2D with the same cooling is on the cards.

---

You are absolutely right on that one. I've been thinking about the same thing. I really wanted a Wolfie, and since its 45nm I thought it would OC much higher. But let's see the upcoming tests and reviews. I hope this was only the initial test silicone.

and on a foxconn mars. nice :D

Quote:

---

Originally Posted by milan03

Man, I really wanted to buy this chip once it comes out, but I was hoping at least 4.5Ghz on air! With my E6750 i can run almost 4Ghz prime stable using U-120 Extreme.
Kind a turn off :(

Nonetheless, Great job with that chip! ;)

---

Quote:

---

Originally Posted by KTE

Very nice work. :toast:

I'm waiting to see some in case results from someone who has these chips after you finish your LN2 record attempting runs because 24/7 like people run is not open bench at all and add 15-20C to the CPU temps you see there and you won't be getting even 4GHz stable and cool enough to run by that standard. Plus NB/MOS/DIMM will also run a lot hotter inside a case with GPU/HDD and so on and you don't eactly run noisy delta fans inside a 24/7 case either. Better cooling and open top we know Wolf will do many MHz by now judging from just Yorky alone.
So it looks like 2-350MHz more 24/7 than C2D with the same cooling is on the cards.

---

Quote:

---

Originally Posted by knob

and on a foxconn mars. nice :D

---

Thank you very much guys!:)

update

Friday, we (Achill3us and me)tried push harder "little" wolfdale, but I have some problems with P5K under LN2..(coldboot,coldbug, vcore and pll bug)..So, I tried again with DI, and on Saturday at 3.00 am we have wonder, how can run this cpu +vcore..:eek: Check this..:)


MB: Asus P5K (vdrop, vcore, vdimm, vmch, vpll mod)
CPU: Intel E8400 6MB L2
CPU Cooling: Artic Ceramique +DRY ICE
RAM: 2x1GB Crucial Ballastix 8500
VGA: ATI Radeon 7000 PCI
PSU: PC Power and Cooling 610W
OS: Windows 2003

vcpu: 1,86v/1,81v , vdimm: 2,5v, vmch: 1,75v, vpll:2,1v

New E8400WR and Max freq WR with Wolfdale!

http://valid.x86-secret.com/cache/285292.png

link

ripping.org:
http://img182.imageshack.us/img182/5708/maxiz9.jpg


New FSB record on 45nm -> 610FSB

http://valid.x86-secret.com/cache/285296.png

link

First Sub 9s in Hungary: 8.969s

http://img20.imageshack.us/img20/6808/9sub2mx1.jpg

and more....8.843s
http://img441.imageshack.us/img441/568/8843s2ec3.jpg

I have happy Christmas..:)

Merry Christmas to Everybody, who read this topic!

Best Regards,

XtwinZ TeamHungary

nice ones - finally some good fsb on 45nm :toast:

I want this FSB on my E8500 ^)

Quote:

---

Originally Posted by White Cat

nice ones - finally some good fsb on 45nm :toast:

---

Thank you very much!

Quote:

---

Originally Posted by DeDaL

I want this FSB on my E8500 ^)

---

hehe, I want too..:D

very impressive clocking there Hungary boys :D

Really impressive update :).

Keep pushing it.

Fantastic :up:
E8500 will be an insane piece of hardware, but even E8400 isn't maxed out. :yepp:

Quote:

---

HDD drives: 15GB Quantum Fireball

---

OMG!

When LN2 time go?

Very nice..... What was maxfsb on air?

I really cant wait for this cpu, I got a QX but as soon as this is available the QX is gone.... Im not liking this low fsb/high multi stuff, I want 620/9.5 :D

Foxconn MARS
N/B Heatsink look like sky train !!! :ROTF: :rofl:

Ez az skacok! :)

Nice job! :)

OMG ! Amazing clocks and only on dry ice ... :clap: You should definitely try this little monster on LN2 ;) ... Hope we hear more from you ! :) Again, great job ! :up:

Thank you always Solarfall, Oliver!!;)

Quote:

---

Originally Posted by Hyperhorn

Fantastic :up:
E8500 will be an insane piece of hardware, but even E8400 isn't maxed out. :yepp:

---

Thanks, yes not the max yet!:D

Quote:

---

Originally Posted by Nordling

OMG!

When LN2 time go?

---

I think first or second week in January! We wait new pots and dewar!:)

Quote:

---

Originally Posted by luihed

Very nice..... What was maxfsb on air?

I really cant wait for this cpu, I got a QX but as soon as this is available the QX is gone.... Im not liking this low fsb/high multi stuff, I want 620/9.5 :D

---

Max fsb can 560-565Mhz on air.(other only can 520)
Hehe, me too, I think not impossible 6ghz with E8500..

Quote:

---

Originally Posted by laragirl83

Ez az skacok! :)

Nice job! :)

---

Thanks mate!;)

Quote:

---

Originally Posted by George_o/c

OMG ! Amazing clocks and only on dry ice ... :clap: You should definitely try this little monster on LN2 ;) ... Hope we hear more from you ! :) Again, great job ! :up:

---

Thank you very much! You will hear from us! I promise!:D ;)

damn amazing cpu on dry ice :eek:

Quote:

---

Originally Posted by PPInDaHouse

damn amazing cpu on dry ice :eek:

---

Thanks:D Next time LN2..;)

Little stressed under 3dmark..:)

3d01: 91801
http://img175.imageshack.us/img175/3237/91800wf8.jpg


3d05:29241
http://img177.imageshack.us/img177/7519/29241yh1.jpg

Great E8400 and impressive score

great scores! is that aircooled? :eek:

Quote:

---

Originally Posted by PPInDaHouse

great scores! is that aircooled? :eek:

---

no, chilled water ;)

thanks guys, in name of over too :up: :D

we hope will test soon both (if the new pot's will be finished) on ln2 single and sli too on p5nt deluxe, but for the sli run we need a yorkfield, because the mobo could only around 400fsb... will be seen...

Window with FPS on 2001 ? Or link to ORB perhaps ? :)

Quote:

---

Originally Posted by bonzo_catalin

Window with FPS on 2001 ? Or link to ORB perhaps ? :)

---

http://service.futuremark.com/compare?2k1=9317232 ;)

Impressive N . 4,8 LOD ?

Quote:

---

Originally Posted by bonzo_catalin

Impressive N . 4,8 LOD ?

---

Sent PM;)

someone give the frame time for 1 smp client at these speeds !!! i betcha their doing the same as 3.6 quads !

Quote:

---

Originally Posted by over@locker886

Max fsb can 560-565Mhz on air.(other only can 520)
Hehe, me too, I think not impossible 6ghz with E8500..

---

mmmmmmmmmmmmmmmmm i think you mean E8400
maybe it can be done ;) i have a chip coming in soon that will get VERY close

Quote:

---

Originally Posted by Iketh

someone give the frame time for 1 smp client at these speeds !!! i betcha their doing the same as 3.6 quads !

---

I will try test, but coming soon I will sale these chips, I want E8500:D

Quote:

---

Originally Posted by dinos22

mmmmmmmmmmmmmmmmm i think you mean E8400
maybe it can be done ;) i have a chip coming in soon that will get VERY close

---

yes, I meant:) I'm very curious your new chip:D:up:

nothing's gonna happen with new chips
they can't do even remotely close to i was told by the seller :(

Quote:

---

Originally Posted by dinos22

nothing's gonna happen with new chips
they can't do even remotely close to i was told by the seller :(

---

So your seller was guessing before testing 'em? :confused:
What's the max FSB you got out of them on air, 500?

We've test on the weekend again, but said news, now it's sure that our wr chip has coldbug on LN2, over done again 5.3+ on Foxconn MARS with DI, nothing more :(
but we've a good time :) and test some other stuffs (jugeen his QX9650, and try to bench with Tri-SLI, but Striker 2 died, P5N-T Deluxe don't boot on subzero heh)...

some of my results with the 8400, DDR3 and (stock cooled/vmodded) GTS 512
(max fsb was only around 580 on DI, maybe the mobo has fsb wall :()

http://img253.imageshack.us/img253/8...dsc0058tr3.jpg

32M
http://img256.imageshack.us/img256/9...olat32mtu7.jpg

AM3
http://img329.imageshack.us/img329/9657/288xxr9.jpg

01
http://img236.imageshack.us/img236/842/89kxna6.jpg

05 (over can't believe that DDR3 is so strong that gain more than 100mhz gpu clock :D)
http://img175.imageshack.us/img175/7042/2908905xpo5.jpg

Cheers;)

I am also thinking about to get an E8400, what I can see from all these benches, it has a really good chance that they can around 4GHz with normal air cooling! :)

Nice result, btw! :)

Quote:

---

Originally Posted by laragirl83

I am also thinking about to get an E8400, what I can see from all these benches, it has a really good chance that they can around 4GHz with normal air cooling! :)

Nice result, btw! :)

---

actually, yes... they are able to run up to 4G on aircooling, and retail's would be better oc's, so the HUNT begins :D

thanks mate ;)

My 540fsb (Stock Air) chip will go under LN2 shortly to see what kind of gains i can make.
I hate walls... give me QX anyday :)

Quote:

---

Originally Posted by T_M

My 540fsb (Stock Air) chip will go under LN2 shortly to see what kind of gains i can make.
I hate walls... give me QX anyday :)

---

We will got some retail chip's in this week i hope, so i'm curious about the wall problems...
yep, but with QX is soo easy :D multi up, fsb down...
imagine a 32M time with a golden e8500 at 9,5*600+ on ln2 (with ddr3 of course) :slobber:

last night i squeezed out a 557fsb suicide on stock air on Blitz Forumla

Quote:

---

Originally Posted by T_M

last night i squeezed out a 557fsb suicide on stock air on Blitz Forumla

---

Not bad Tim! ;) Keep pushing it!

coming soon..I/we will back with retail results..:D

Sounds good Tim and sad about the striker ll...

Keep pushing it guys.

http://img341.imageshack.us/img341/4696/53gr0.jpg

single stage, 1.7v

cpu and max fsb wasn't maxed, i got some hardware problems :(

I'm really liking wolfdale

sub 10m on water!

http://img.photobucket.com/albums/v3.../95987532M.jpg

nice! what batch is it?

My 8400 should be here tomorrow morning, happy time.:D

Q746A476 with xxxxx15

I've got 2pcs of E8400 yesterday, same fpo's (Q744A761), and project "suxx" begins :rolleyes: tested in 3 mobo's, Asus P5K3 Deluxe (bios 0810), Asus Blitz Extreme (bios 1005), Asus Blitz Formula (bios 1402)
i don't feel like upload the valid's, it's just my small report, beleive or not... i'm a bit upset with the results...
btw, cpu's was cooled with my custom D-TEK watercooling

http://img135.imageshack.us/img135/497/8400blitzaw2.jpg

max fsb results with 6x and 7x multi, 333strap (1.65v pll, 1.75v nb, 1.40-1.50v fsb, 1.35v core):
P5K3 Deluxe CPU#1: 536fsb
P5K3 Deluxe CPU#2: 541fsb
boot problems above 470fsb
CPU#1 couldn't boot at 6x 7x 500fsb only 8x 9x multi
CPU#2 couldn't boot at 6x 7x 8x 500fsb only 9x multi

Asus Blitz Extreme CPU#1: 549fsb
Asus Blitz Extreme CPU#2: 554fsb
cpu#2 was able to save bios and begin boot at 550fsb

Asus Blitz Formula CPU#1: 556fsb
Asus Blitz Formula CPU2#: 542fsb
everything is fine, no bugs find

stability tests on 9x445fsb:

P5K3 Deluxe CPU#1: 1.400v 15min prime pass
P5K3 Deluxe CPU#2: 1.360v 15min prime pass
droop: 0.004v measured to the bios set (no droop mod!)

Asus Blitz Extreme CPU#1: 1.370v 32M pass
Asus Blitz Extreme CPU#2: 1.350v no windows boot or freeze
droop: 0.03v measured to the bios set

max frequancy at 1.60v core:

P5K3 Deluxe CPU#2 4696MHz validation

Asus Blitz Extreme CPU#2 4639mhz validation

i'm testing the all day, but this results are very weird...
if i can figure out wich chip is the better one, i will test some max frequency, 1M, 32M and 3Dmarks... subzero benches at next week...


btw, very nice results Tim and MaSell, congrats ;)
i can smell, if somebody will find an E8400 wich have no coldbug on Ln2 (and fsb wall of course), will beat our 5.4G soon :D

nice info achill3us as always, not triesd in the maximus extreme yet

Quote:

---

Originally Posted by GLENBOY

nice info achill3us as always, not triesd in the maximus extreme yet

---

thank you mate, i've just updated a bit... my weekend was gone to this tests...
yep, i think i will try maximus extreme soon, so much people said it's one of the best mobo's now for ddr3, and the 1000mhz club list verify me at this :D

You haven't tested yet with blitz formula on 9x445?