R600 cooling

Printable View

08-20-2007, 11:53 AM
Circaflex

R600 cooling

Im ditching my water setup and going back to air, looking for something to cool down the 2900. So far the best thing ive found is the HR-03 / R600 but no where to be bought? Is it not out yet? Is there something else?

**NOTE** I dont want to have to mod any cpu coolers or anythin gof that nature, just straight install.
08-20-2007, 12:53 PM
Cooper

Quote:

Originally Posted by Circaflex

**NOTE** I dont want to have to mod any cpu coolers or anythin gof that nature, just straight install.

Then I think you'll have to start looking for HR-03 :D
08-20-2007, 04:52 PM
ChaosMinionX

The R600 HR-03 isnt even out yet :(
08-21-2007, 06:51 PM
cyberspyder

Quote:

Originally Posted by ChaosMinionX

The R600 HR-03 isnt even out yet :(

Yep....
08-22-2007, 12:14 AM
zanzabar

i thought that his's fully coper 2900 hs was one starting to get to be one of the best cooling layouts without liquid

what about shoving a high output fan over the stock one to suppercharge it untill some giant 3pci slot cooler comes out
08-22-2007, 05:52 AM
jabtech

Quote:

Originally Posted by ChaosMinionX

The R600 HR-03 isnt even out yet :(

Its starting to ship this week.
08-22-2007, 10:41 AM
ChaosMinionX

Quote:

Originally Posted by jabtech

Its starting to ship this week.

Oh nice, any dates on when it will arrive?
08-22-2007, 10:49 AM
SaII

why not just take off the red plastic cover and just strap on a panaflo?
08-22-2007, 12:50 PM
jabtech

Quote:

Originally Posted by ChaosMinionX

Oh nice, any dates on when it will arrive?

I believe they arrive tomorrow... Some places may get them earlier though.
08-22-2007, 01:33 PM
zanzabar

will the hr-03 realy cool better it looks like its a similar design design and the same amount of material but in an aluminum, or nickel coating
08-22-2007, 05:36 PM
ChaosMinionX

Quote:

Originally Posted by zanzabar

will the hr-03 realy cool better it looks like its a similar design design and the same amount of material but in an aluminum, or nickel coating

In this world, anything is better than stock. Dont you forget that :up:
08-23-2007, 01:45 AM
Olivier

Standard ATI

Quote:

Originally Posted by zanzabar

i thought that his's fully coper 2900 hs was one starting to get to be one of the best cooling layouts without liquid

what about shoving a high output fan over the stock one to suppercharge it untill some giant 3pci slot cooler comes out

:welcome: to ati standard cooler.......unless I missed something on HIS's WWW
08-23-2007, 01:51 AM
Olivier

Keep the stock cooler

Keep the stock and run higher fan speeds with ATI tool........at 100% you should be down 10°C from stock

The problem with HR-03 etc is cooling of the Rams.........small heatsinks stuck to them just don't cut it (remember your thermodynamic classes)

Other than that its back to Liquid and danger den..........
08-23-2007, 10:13 AM
ChaosMinionX

Quote:

Originally Posted by Olivier

Keep the stock and run higher fan speeds with ATI tool........at 100% you should be down 10°C from stock

The problem with HR-03 etc is cooling of the Rams.........small heatsinks stuck to them just don't cut it (remember your thermodynamic classes)

Other than that its back to Liquid and danger den..........

If you put good heatsinks on them, its fine. Dont use the crappy sinks that coem with the HR03 and its ok :up:
08-23-2007, 10:32 AM
G H Z

Keep the stock cooler, hot exaust air leaves the case and thats a good thing.
08-23-2007, 01:38 PM
Jodiuh

Quote:

Originally Posted by ChaosMinionX

If you put good heatsinks on them, its fine. Dont use the crappy sinks that coem with the HR03 and its ok :up:

I'm not sure of the R600 edition, but there's 3 chips on the 8800 GTX that have less than a 1/4 in room before the heatpipes start smacking into them. Too bad those pipes don't go up @ an angle.
08-24-2007, 01:01 AM
FrozenTundra

Quote:

Originally Posted by G H Z

Keep the stock cooler, hot exaust air leaves the case and thats a good thing.

No point in exhausting the air out if it's not cooling the GPU well...:shrug:
08-24-2007, 08:28 AM
ChaosMinionX

Quote:

Originally Posted by Jodiuh

I'm not sure of the R600 edition, but there's 3 chips on the 8800 GTX that have less than a 1/4 in room before the heatpipes start smacking into them. Too bad those pipes don't go up @ an angle.

Bend them to fit :)
08-24-2007, 10:46 AM
Jodiuh

Haha, I saw that done, but I am not that brave. :D
08-28-2007, 10:22 AM
ChaosMinionX

Where is the HR-03 R600? I found it on one African retailer of all places lol
08-28-2007, 10:58 AM
Tommy_Hewitt

In germany the HR-03/R600 is in stock :D

http://www.pc-cooling.de/VGA-Chipset...ml?language=de
08-28-2007, 06:06 PM
jabtech

Quote:

Originally Posted by ChaosMinionX

Where is the HR-03 R600? I found it on one African retailer of all places lol

They delayed it a week.. Should show this week for sure.
08-30-2007, 07:22 AM
cyberspyder

Do what I did, and make a 120mm duct ducted to the PCI slots.
08-30-2007, 09:22 AM
I34z1k

Quote:

Originally Posted by ChaosMinionX

Where is the HR-03 R600? I found it on one African retailer of all places lol

Where?!!? Lol that will help me :D
08-30-2007, 10:10 AM
ChaosMinionX

Quote:

Originally Posted by I34z1k

Where?!!? Lol that will help me :D

http://www.sybaritic.co.za/store/pro...ducts_id=13443

Enjoy :)
08-30-2007, 11:37 AM
I34z1k

CRAZY I know that shop :D Thanks
08-30-2007, 04:37 PM
Ar3s

its listed on jab-tech but no stock yet
http://www.jab-tech.com/Thermalright...0-pr-3877.html
08-31-2007, 04:30 PM
ChaosMinionX

IN STOCK and ordered from JabTech :)
08-31-2007, 06:53 PM
jabtech

Quote:

Originally Posted by ChaosMinionX

IN STOCK and ordered from JabTech :)

Now I know who you are and where you live... Let the stalking begin !:D
08-31-2007, 07:17 PM
Spawne32

Quote:

Originally Posted by jabtech

Now I know who you are and where you live... Let the stalking begin !:D

ill expect a PM with his address and phone # also :up:
08-31-2007, 09:32 PM
ChaosMinionX

Quote:

Originally Posted by jabtech

Now I know who you are and where you live... Let the stalking begin !:D

Haha, was I your first order?

And I would have spent another bit of money, but you didnt have an Enzotech ramsinks in stock :(

But Gary @ Sidewinder did :)

Also added Jab to my bookmark toolbar, nice little site I hadnt known about :)

EDIT: I had that particular item on alert me status :)
09-01-2007, 05:06 AM
MichelinGuy

Intresting... does the Thermalright come with ram cooling?
09-01-2007, 07:49 AM
Ar3s

yes it does... you can view the installation guide on their site. the press release is out too.

@ChaosMinionX looking forward to your views on its cooling of the r600. what fan you pairing it with ?
09-01-2007, 11:42 AM
ChaosMinionX

Quote:

Originally Posted by Ar3s

yes it does... you can view the installation guide on their site. the press release is out too.

@ChaosMinionX looking forward to your views on its cooling of the r600. what fan you pairing it with ?

I have a 92mm http://www.sidewindercomputers.com/depf92drhisp.html - not actually gonna use that for 24/7, but I will however be using..... Thermaltake A2017 http://www.sidewindercomputers.com/th92blledsmf.html

And I am not using the stock RAMsinks from the HR03-R600...I have Enzotech BMR-C1's http://www.enzotechnology.com/graphic_card.htm

Also will be mounting the cooler with Liquid Metal Pad :)
09-01-2007, 12:30 PM
ColonelCain

Quote:

Originally Posted by ChaosMinionX

I have a 92mm http://www.sidewindercomputers.com/depf92drhisp.html - not actually gonna use that for 24/7, but I will however be using..... Thermaltake A2017 http://www.sidewindercomputers.com/th92blledsmf.html

And I am not using the stock RAMsinks from the HR03-R600...I have Enzotech BMR-C1's http://www.enzotechnology.com/graphic_card.htm

Also will be mounting the cooler with Liquid Metal Pad :)

This outta be interesting... looking forward to your results. As for me, once I get an X2900XT, I'll be watercooling it.:D
09-03-2007, 05:47 PM
ChaosMinionX

HR-03 R600 -- Tomorrow :D

_Insane shipping on that Jabtech :up:

2days on USPS Priority, you guys must be real close to me :)
09-04-2007, 05:15 AM
Jodiuh

They're a solid company. I'm all the way in AZ and they managed to 2 day it for a reasonable price before.

Ah...Newalla OK 74857, that's why, hehe.
09-04-2007, 10:45 AM
ChaosMinionX

Okies, no wonder...but damn 2days is fast.
09-04-2007, 11:33 AM
Start

Quote:

Originally Posted by ChaosMinionX

Okies, no wonder...but damn 2days is fast.

http://www.jab-tech.com/help.php?sec...#timeintransit :D
09-04-2007, 11:49 AM
Jodiuh

That's a cool map! All sites should have one of those. :up:
09-04-2007, 05:11 PM
ChaosMinionX

Opening results :)

pics to follow as well.....Idles at 35C :)

And ATI Control center clocked it to 890 / 1175 without it breaking 60C....more testing coming :)

-----Game testing to follow, and FUR rendering stuffs. I am waiting on my 92mm fan before I do anything big.

http://i11.photobucket.com/albums/a1...Untitled-7.jpg

Rig in my sig, idles at 36C across the board :)

HD2900XT 1GB with HR03 R600 - Seated with Liquid Metal Pro

So far this thing frikkin rocks.

Will be testing Bioshock at max and testing heatout put.

EDIT: Some pics of it installed.

http://i11.photobucket.com/albums/a1...X/IMGP0480.jpg
http://i11.photobucket.com/albums/a1...X/IMGP0478.jpg
http://i11.photobucket.com/albums/a1...X/IMGP0482.jpg
http://i11.photobucket.com/albums/a1...X/IMGP0484.jpg
http://i11.photobucket.com/albums/a1...X/IMGP0481.jpg
09-04-2007, 05:57 PM
Start

Chaos try using this app to stress your card. Should heat it up to the max.
09-04-2007, 06:01 PM
ChaosMinionX

Quote:

Originally Posted by SP33DFR34K

Chaos try using this app to stress your card. Should heat it up to the max.

Downloaded...testing !

Thanks SP33D
09-04-2007, 06:43 PM
ChaosMinionX

Any specific settings besdies setting AA to max and fullscreen mode to load the card?
09-04-2007, 09:27 PM
Spawne32

Man i cant wait till you get your new setup and you send me all your parts for free ;)
09-05-2007, 04:59 AM
reddevil0728

Quote:

Originally Posted by ChaosMinionX

Opening results :)

pics to follow as well.....Idles at 35C :)

And ATI Control center clocked it to 890 / 1175 without it breaking 60C....more testing coming :)

-----Game testing to follow, and FUR rendering stuffs. I am waiting on my 92mm fan before I do anything big.

http://i11.photobucket.com/albums/a1...Untitled-7.jpg

Rig in my sig, idles at 36C across the board :)

HD2900XT 1GB with HR03 R600 - Seated with Liquid Metal Pro

So far this thing frikkin rocks.

Will be testing Bioshock at max and testing heatout put.

EDIT: Some pics of it installed.

http://i11.photobucket.com/albums/a1...X/IMGP0480.jpg
http://i11.photobucket.com/albums/a1...X/IMGP0478.jpg
http://i11.photobucket.com/albums/a1...X/IMGP0482.jpg
http://i11.photobucket.com/albums/a1...X/IMGP0484.jpg
http://i11.photobucket.com/albums/a1...X/IMGP0481.jpg

any idea how high does the heat pipes protrudes? for both scenario - aka heatsink at the back, and heat sink in front
09-05-2007, 08:14 AM
ChaosMinionX

Well... if you were to judge solely from the picture....that fan is 25mm thick... so around 35-50mm give or take?
09-06-2007, 08:39 PM
Overgloc

Great Result Chaos!! Gonna pick one up and see if i get higher!!

All times are GMT -8. The time now is 05:22 PM.

XtremeSystems