Printable View
http://img125.imageshack.us/img125/6...0140mg4lf2.jpg
http://img125.imageshack.us/img125/7...l8smallee9.jpg
http://img125.imageshack.us/img125/5...o5smallqj8.jpg
The hole in the front is sized ofr a 16x2 lcd screen
They can be made on aluminum or steel.
This cases are made in Germany so it will be easy to get on EU or USA than South America.
wow nice.. how much would steel versus aluminium weigh in at ?
+1Quote:
Originally Posted by eva2000
and how much thick this alu?
I use these cases myself, awesome quality :)
who is selling those in eu?
regards
Tim
ME :)Quote:
Originally Posted by tim-
any sales related questions guys please keep to pms, those that have asked prices etc please edit your post or they will be deleted
ALso please read this sticky
http://www.xtremesystems.org/forums/...d.php?t=141754
kayl
These made by the German Shark ?
I was going to get one off him but i got half responses then nowt. Sad really as i had money rady to go!
by PM onlyQuote:
Originally Posted by noobzed
SS: grtz for such lovely cases :toast:
Is the black case on the extreme right hand side prepared for 3 x 120 rad?
if yes is the prep for thermochill pa 120.3
very nice single stage case's Ss, but where are thos cascade case's :D ?
nice work :clap:
Can we see how you attached the LCD's to the case?
you making them or outsourcing?
if you are, do have a a punch press or drilling those hole manually? all i gotta say is that they are sexy looking!
They are profesional made
The steel and alu cases are made of 1.5mm thick sheet metal.
They are powder coated in black (RAL 9005 matt-fnished or satin-finished), or RAL 9006 and a special color that looks like silver.
The cascade is made of 1,5mm steel and the bottom is 2,0mm.
Any question regarding sales, by pm guys, please.
They look awesome Ssilencer!! Well done :clap:
What are the dimensions? Im playing with the idea of phase again but I want to find a large enough case to hold all my goodies and line up with a phase system perfectly.
awesome cases. any rear pics & inside?
Very nice case :yepp:
The powder coating and build is very professional :up:
490x210x230mmQuote:
Originally Posted by Circaflex
600x210x230mm
Yers, it is for the thermochill pa 120.3Quote:
Originally Posted by blindfitter
Very nice:DQuote:
Originally Posted by Ssilencer
Thanks :DQuote:
Originally Posted by gosmeyer
Nice indeed
I found a couple of other pics:Quote:
Originally Posted by Athens[2004]
http://www.directupload.net/images/u...8/Dl2WX8z6.jpg
http://img518.imageshack.us/img518/7198/wakcase1vg7.jpg
is it frame on those cases?
regards
Tim
Yes sure
what is the size of the opening on the case on the right? It looks larger.
Nice cases.
how can i get one mate? please pm me if you can help :D
Ssliencer has said if you bothered to read any replys was to PM him and if you read the forum rules you'll see price are only allowed via PM
The cases are made by LeChuck from Germany, right?
Great Cases!
i didnt ask for a price , anyways thanks for the reply :D
Right who has these instock and ready to go? I want a raw finish for an SS.
No paint anything but it's not a problem if panted!
Need 2 of them!
PM me who has it ready to go as i been told 1 month which is not good and no use to man or beast!
Someone sort it out like
This thread was made before the change of rules, and I think what you are asking is against the rules, if not, my mistake, sorry.
You asked for custom jobs in msn, nobody have your "perfect case" already done in the size , style and with the holes you want, there are cases already made, in 490 and 600mm long in aluminum.
Regards
PM sent.
Topic was to find out who has got them ready to go as only you i can get a response out, Patrick doesn't speak!
Quote:
Originally Posted by ea6gka
Yes - Cases are made by LeChuckQuote:
Originally Posted by bl1zZ
You can contact him by PM or email. No discussion of sales here.
They are nice cases :up:
From argentina... to the hole world.. by SS :)
Very very nice case :) hey SS can use that case to mount my WC sistema, rad, bomb, resv???
You've to honor the work from LeChuck.. it wasn't SSilencer's design...
He only added a custom LCD hole.
THE CASES ARE MADE BY LECHUCK, NO QUESTION ABOUT IT AND I NEVER TOLD THAT I DID THEM.Quote:
Originally Posted by Entsafter
WE JUST MADE AN AGREEMENT AS I THOUGHT HE HAD AN EXCELLENT PRODUCT BUT ALMOST NONE KNEW IT.
THE PRICE OF THE CASE IS THE SAME FROM LECHUCK OR FROM ME.
RUNMC IF YOU HAVE ANY PROB WITH ME, SEND ME A PM OR CONTACT ME ON MSN, I'M NOT OVER THE RULES NEITHER I DID SOMETHING WRONG.
Dates on the PDF file Leechuck has for these are way before Mariano ''added his mod''!Quote:
Originally Posted by Entsafter
No problems here :)Quote:
Originally Posted by Ssilencer
Some pictures of a waterchiller (created by someone else :)):
http://lechuck.golanpower.de/projekt...3red%20017.jpg http://lechuck.golanpower.de/projekt...3red%20018.jpg
http://lechuck.golanpower.de/projekt...3red%20019.jpg http://lechuck.golanpower.de/projekt...3red%20023.jpg
Some pictures of a cascade (created by someone else too.... :)):
http://lechuck.golanpower.de/projekt...ascade_001.jpg http://lechuck.golanpower.de/projekt...ascade_002.jpg http://lechuck.golanpower.de/projekt...ascade_003.jpg
http://lechuck.golanpower.de/projekt...ascade_004.jpg http://lechuck.golanpower.de/projekt...ascade_005.jpg http://lechuck.golanpower.de/projekt...ascade_006.jpg
that green grass seems like the backyard from the phase chnge builder from austria.. cant recall his name :P
Have ordered my SS case now! Lots of mod to be done as i aint waiting 1 month for a custom one to be made!!!
Cascade is a Cold_Ice job i think
Blatantly a cold_ice job :P too neat to be anyone elses (other then Bazx that is :P)
Three months ago I bought more Items from Mariano "Ssilencer" and he promised me that the execution of the request would take only one month! But until this moment I did not receive anything and did not return my money = 785US. Recently is ignored my letters .... In fact I do not know what is the real reason for this!!
X3 controller + aluminum black case + @itor evaporator with fixing screws without enclosures
:( :( :(
HI!
Case is ready.
http://www.bilder-hochladen.net/file...bs/2jh3-2s.jpg
Still waiting for the controller to get dimensions for the front panel.
I received money from Ssilencer for that case, he don't have outstanding debts with me.
Only hope that i receive the controller to fabricate the front panel as fast as possible so i can send you the case.
Greetings LeChuck
Hi "LeChuck"
I know it is not you of any guilt in what happened but I don't know how can I reach to "Mariano"
If you could know any way to contact with him and know the reason of ignoring my messages to him.
I was hesitant to write in this subject in order to not give a bad idea about you but I was very compelled to do so because until now I didn't receive my items or my money back.
I'm waiting for your reply or PM
Thank you,
Did the Controller yet reach you LeChuck?
It was not Ssilencerīs fault it took the controller so long to you. He sent it to me along with 2 other controllers I ordered to save shipping costs and there was some fuzz about the address. Finally I could ship it end of last week. I hope it reached you today.
Regards,
Philipp
The controller is here.
Still have to make the front panell.
Hope will be ready in the next days.
Greetings LeChuck
Hi "LeChuck"
If you not received the control to now I wish send me the case without (X3 control) hole.
I waited more than 4 months to now and I not receive any anything from "Mariano". I hope that does not happen to others, as happened with me!:(
Quote:
Originally Posted by DXB750
DX750 -
LeChuck said in his post that he has received the controler. LeChuck needs to update his progress on how he is doing with the face plate for your case. I'm sure he has been delayed by the holidays. I remember when you ordered the case. You have had to wait way too long for it. :shakes:
Hi Ron,
I didn't understand "LeChuck" last reply ,and I think that "Mariano " didn't send the control to "LeChuck" .I am sorry for this misunderstand .
Thank you Ron
Hi DXB570,
I bought something from both of them, Mariano and LeChuck.
The Controllers from Mariano took quite a while until they arrived, but everything was as promised, good packed, etc. So just be a little patient, I think its worth it.
The cases from LeChuck are world-class. He provides almost the whole German scene with cases via a German forum. He makes them in his spare time (as I understood) and is very reasonable with pricing. It takes a little time for the cases to arrive as he does not make one case at a time but waits until he can make a run of some dozens.
Please be also a little patient until your case arrives, I watch the German forum regularely and have so far not seen one single unsatisfied customer.
Regards,
Philipp
Only one question.
I have only the case and the controller, do you just have the singke stage unit and how was/is it shipped?
Hi Philipp
Thank you for your replay .
Before this Time I have made an order with Mariano and I received the whole order as we deal and without any problem,but this time I don't know the real reason for this delay also he was un honest with me about the date of the shipping "every time he delayor postponed the order". I care to Mariano ,I don't want to lose his good and distinguished work . I hope that he can be more serious about the customer.
-----------------------------------------------------------------------
I will try to PM him again about the @itor Evaporator and I wish that I will received a reply from him .
Thank you
I did not understand your question well !! Please explain to me the most . :)Quote:
Originally Posted by LeChuck
LeChuck - DXB750 does not speak English hardly at all. He has to use a translator to read each post. Can you explain better what is going on?Quote:
Originally Posted by LeChuck
Am I correct in saying the only thing you were going to do was make a case for DXB750? Am I correct in saying you were waiting on the controller to cut the hole for the face plate. Please explain. Were you suppose to do anything else for DXB750.
It seems that DXB750 is still waiting on an evaporator from Ssilencer (Mariano) Is this correct?
My english is bad too :)
But is exactly like you say in your last post.
I make only the case and i was waiting for the controller to get the right dimensions for the front panel.
So DXB750 will get only the case and the controller, nothing else.
Thank you for your answer to me.
You have the case built and you have the controller.
1. How soon will you be able to ship the finished case and controller to DXB750?
2. Will you be shipping the case and controller directly to DXB750?
3. Have you been paid in full?
I'm sorry to be getting involved, but I think this will help because of the language barriers. ;)
thank you for your cooperations. :)
Thank you for your involved .
1- I was paid all the cost for Mariano before "Full paid" ... shipping cost to my country + PayPal fees .
2- about the @itor Evaporator Mariano had to send it to me from Argentina to my country because i paid for it "the cost + shipping also" .
Regards,
1) I think will be ready in ~2-3 Weeks.Quote:
Originally Posted by runmc
2) Yes.
3) Yes.
Your evap was sent and I got it back here a pair of days ago, as "wrong address" give me another address, you told me that you have another address in the states (USA) give me that address and I will ship it as soon as possible.Quote:
Originally Posted by DXB750
December is not the best month with the holidays in between...
Lechuck was full paid months ago, for the case, extra panels and shipping to your country.
The shipping address is the same address that you used it before in the first order, and their wasn't any problem with it. If you face that problem it would been better that you sent me the tracking number as the first time when I made order, this will helping me to contact with the post office in U.A.E.Quote:
Originally Posted by Ssilencer
Any way.. I will send you my address in U.S.A. and I will wait for you to give me the tracking number.
Regards,
Case is ready next week.Quote:
Originally Posted by LeChuck
Until now I did not receive any items from "Ssilencer" and "LeChuck" !
HI!Quote:
Originally Posted by DXB750
Can you give me your adress please, also telefone number etc per PN?
Sorry for this very late answer.
I had some private problems and couldn't do anything on your case until today.
Today i made the drawings for the front plate and i will give it in production tommorow. I hope it will be ready in the end of next week, so i can send you the case on friday.
You will get the ident code of the parcel service, so you can track your case.
But i don't know how long will shipping take from germany to the arab emirates.
Sorry again for this extreme delay ... thats the reason why i usually don't make any special client cases, because i don't have really time doing it.
I hope you can forgive me ....
Greetings from Germany
LeChuck
Unfortunately another delay, but today i was able to ship the case.
I was one week in bed with a nice flu.
Here some pictures:
http://www.bilder-hochladen.net/file...bs/2jh3-30.jpg http://www.bilder-hochladen.net/file...bs/2jh3-31.jpg http://www.bilder-hochladen.net/file...bs/2jh3-32.jpg
http://www.bilder-hochladen.net/file...bs/2jh3-33.jpg http://www.bilder-hochladen.net/file...bs/2jh3-34.jpg
I couldn`t find out the right direction of the display, so i made two different front plates and mounts (1/2 left and 1/2 right).
And you ordered 2 frontplates, the second one with another cut for a different display. I don't know the measures of this display. So i made two frontplates without any cut, maybe you can find someone that can make a lasercut for you.
I will send you the Tracking Number later by PN.
Greetings LeChuck
For the front plate there is no problem! Thank you very much "LeChuck"
Today I received the case with controller of "LeChuck", And the work was at the top of perfection ... :)
Thank you "LeChuck"
------------------------------------------------------------------
About the @itor evaporator it unfortunately I did not receive from Mariano! and does not respond to my letters .
Regards,
I hope you will receive the rest of your parts as soon as possible.
And then we all hope you will post some pictures :)
He lives in Germany (haha, what a nice thing!) so I guess.... with shipping, exchange rate and coustoms i think it would kill you :D .
really pissed off I am..
XS phase change had been very changer nowadays.. sad and shame
Can you please explain what your saying? :confused:Quote:
Originally Posted by Renemity73
+1Quote:
Originally Posted by runmc
No clue what your saying...
Let me give a translation a shot..
I am really pissed offQuote:
really pissed off I am..
XS phase change had been very changer nowadays.. sad and shame
XS Phase Change has been very different these days.. [I am] sad and ashamed.
My translationQuote:
Originally Posted by Renemity73
Wise you are, speak like yoda I do, sad and ashamed I feel for xs phase change.
This = win.Quote:
Originally Posted by Ozzfest05