Printable View
Just received these units from little devil to test for him
As you can see there is one gpu(not a LD) and 3x CPU (all LD)
One is just a standard LD pot no centre pole all aluminium
Second aluminium one has a centre poll
Third copper base no centre pole
below is the copper base unit on a QX6700@4.55ghz
http://www.net7.info/1/ln2pots/IMG_0170.jpg
http://www.net7.info/1/ln2pots/littledevil/DSC00521.jpg
First up some 3D06 CPU tests with the copper pot
QX6700@4550mhz, 1.75v, 2:3 4.4.4.12 /2.55v
test run at -118/-125 on Asus Commando vmod/vdrop
http://www.net7.info/1/ln2pots/littledevil/06cpu2.jpg
http://www.net7.info/1/ln2pots/littledevil/06.gif
so far only the copper pot has been mounted and in this case -120
tomorrow i will run some 06 with the gpu pot mounted on a 8800gtx
then i wil try each pot with X6800
i ran some single card 3D06 tonight and it went very well
the CPU pot(copper) held very well @4547mhz
i managed to take some lil movies with my camara but it was a bit tricky the camera only takes 15sec clipsQuote:
5. 3Dmark 2006 - 17124 marks - bazx (OC Forums) - [#5 in 3Dmark 2006 with a single graphic card] - (Geforce 8800 GTX @ 841/1207mhz
you can get them here
http://www.net7.info/1/ln2pots/littledevil/movies/
http://service.futuremark.com/compare?3dm06=1606107
setup
http://www.net7.info/1/ln2pots/littledevil/DSC00534.jpg
Nice work baz... sounds quite loud though... is the cascade running too?
Quote:
Originally Posted by Brettbeck
no cascade his time:D
it was real strange benching without the noise from the cascade
Nice! But watch out with the frost!
Quote:
Originally Posted by bazx
Hehe :D. On the videos it just sounds like something is runnning. It's a loud humming sound. You should publish your CPU score on the ORB baz... then there will be someone from the UK up there :).
@ Noob-ftw - Don't forget that with LN2 the PCB will be so cold that any water vapour making contact will freeze instantly, so I think the only problem would be if he left switched the rig off and just left the pot mounted.
Can you say that safely? I wouldn't risk it and put some armaflex and tissue papers over there :)
nice setup and scores m8. looks like your having fun :)
Nice work! :toast:
looks good
interested how it all pans out
Nice testing m8 :toast: im quite curious how my Gpu pot will perform.
hehe and some more tonight i changed cpu to a X6800 to run some 3D Still on copper base -120
ALL Single Card 8800GTX 851/1223
http://service.futuremark.com/compare?3dm05=2878124
http://www.net7.info/1/ln2pots/littledevil/05.gif
260154 - X6800 @ 5063MHz, 8800 GTX 851/1223 (single gtx)
http://www.net7.info/1/ln2pots/littledevil/am3/260.jpg
and some 3D01
87778 - intel X6800 @ 5063mhz 8800gtx @ 851/1223 (single gtx)
http://service.futuremark.com/compare?2k1=9178258
Wow some nice results there Baz, way to go mate will watch this with intrest.
i am have way to much fun with this pot i dont want to change it for another:DQuote:
Originally Posted by sacha35
but i must get on and do some testing
All the best of luck mate, fingers crossed for you, looking for some WR with the setup or very near.Quote:
Originally Posted by bazx
If Baz says he doesn't want to change a pot and is saying ''im having way too much fun'' then that sells it to me and im sure the grin on his face has nothing to do with a female insight or the net for that matter
Plus anyhting i have seen from LD is pure sex it's a multi 100% both ways
Ah good point. Just seeing frost on electronics scares me though. :stick:Quote:
Originally Posted by Brettbeck
Beautiful container with beautiful results. :up: Congrats baz and keep going. :D
I don't really think it's the frost that causes problems. It's when the frost is able to warm up just enough for it to start melting, then you'd have problems :p:. As long as it's kept cold with the LN2 though it shouldn't melt.Quote:
Originally Posted by Noob-ftw
Thanks bazx for really nice review :toast:
regards
nice work bazx...:toast:
Push 8800 gtx little harder im sure on ln2 card good for
atleast 900mhz
maybe you are right :DQuote:
Originally Posted by Dynasty
i am running the gpu at -70 right now but next time -90
@little devil it has been a pleasure to work with your pots
and will soon try the others
temps compare? heatload...
grtz
Quote:
Originally Posted by Jort
lol jort i have been a bit lazy but i will do compare soon
here is a 1m done on the copper base pot/2003 /1:1 4.4.4.12 /-155@1.75v
http://www.net7.info/1/6800/cold/1mm.jpg
try it with 1.85V and -130C it should be better which board?
commando
and you never no i need to get the temp prob closer to the base but will need ld to let me drill a small hole in his pot
Really nice results bazx :toast:
Regards
Nice work baz! Your x6800 is retail isn't it?
yes it is brett and it belongs to thickbrit he has alowed me to use it for a whileQuote:
Originally Posted by Brettbeck
been having some fun this morning with 1m on the copper base pot
http://www.net7.info/1/6800/cold/1m/bb.gif
He he - Nice clock speed :D
Good work Baz!
Tom
clock speed is fine for sure now i need some help to get that time down
hehe i have the fastest 1m in the UK
Nice one Baz :D! Windows 2003 for faster time :p:.
Still on commando? Can u share vcore and temp?Quote:
Originally Posted by bazx
Watching your picture I will do these:Quote:
Originally Posted by bazx
hide clock, kill lan, hide quick launch and lock taskbar, these is just what I saw is wrong from picture ;)
bazx you should have gone for 3-4-3-x timings instead.......it would have been quicker than 3-3-3-x
:)
Misko i am still on commando 6800@1.8v m/b is vdrop/vmod 1:1 /12x:)
unsure of core temp but pot is -150 12mm from the base
brett this windows 2003:p:
dino i think you are right and will be trying that set along with 1:1/11x next:)
you guys are very lucky with chips that can handle -150C pot temp :eek: :toast:
Quote:
Originally Posted by dinos22
it is properly lower at the base but still very amazing.
My Freinds X3060 cooldbugs at -118
-118C base temp or core tempQuote:
Originally Posted by Nosfer@tu
does speedfan report temps properly below -70C as i know it works fine with DRYICE
Really impressive results my friend, you have really nice chip there :toast:
Did you already make holle for k-type in the bottom?
Best Regards
Very impressive baz, has got to be a UK record for sure, well done mate on a good job.
1.8v maybe u find it to low, try with 1.9v, u have beautiful CPU out there :toast:Quote:
Originally Posted by bazx
Flat nine is everything expect easy ;)Quote:
Originally Posted by |JACK-
this chip belongs to a friend and i must be take care of itQuote:
Originally Posted by Misko
so i will have to leave 1.9v for him to try:)
Yes that's why I said 1.9V ;) , I have tried 1.95V, next time I will try 2.0V :) of course there is no rule that higher voltage is better then lower but still I'm gonna try :)Quote:
Originally Posted by bazx
base temp, Drilled 2½ mm in to the base core from the side, mounted and glued with Asetek thermal nasty studd thingy :)Quote:
Originally Posted by dinos22
Dont accualy remember the difference from base temp top bios temp.
So it is propperlu at -105 C for the cpu.
Cant we just do a Tcore mod ?
took all the advice given here and here is the results:D
still at same vcore 1.8v
link to full size image
http://www.net7.info/1/6800/cold/1m/1mfullsize.gif
http://www.net7.info/1/6800/cold/1m/ggg.gif
after i did this run the os got a bit flakey i think i turned of to many sevicesQuote:
Originally Posted by bazx
Didn't I tell you not to touch the services? :p:
Great CPU u have there :toast:
Really nice results my friend :toast:
regards
Quote:
Originally Posted by LittleDevil
its a very good pot:D
i have been trying some 32m runs and the copper base pot holds the load very well
when running 32m you need to stick pins in ya arm to wake up its so boring
waiting for it to finish:D
sweet results there,
keep it up !
very nice work there bazx :toast:
thanks guys i have had alot of fun with this cpu and potQuote:
Originally Posted by kayl
good resultQuote:
Originally Posted by bazx
now use maxmem 128MB and also try 500MB and see how you go.....that should speed up 1M more
since you are on P965 you should push the RAM with high 4-4-4-x clocks :)
we want to see 8.9xx runs :D