Printable View
http://img251.imageshack.us/img251/6...rtalentzx9.jpg
Still testing, will have much more results later. This is much more than I was expecting from a $124 2x1gb DDR667 value kit. It beats out my Gskill DDR800 that max's at 860. Please keep in mind I got them in today and am just starting to really mess with them.
DDR900 2.1V 5-5-5-15
DDR800 2.1V 4-4-4-12
Please don't bash me as this is a value kit not a comparison to Micron D9.
This was from the online deals and sale section.
Don't worry about that. Not everyone has a big pocketbook. I am glad your ram is working out.
If you don't have a fan on the ram I would suggest putting one on them. I would also suggest running prime on blend for stability of it.
Get more volts in them and see what they can really do :D Looking great at 2.1v though!
THX for the advise. Although the ram is not even warm if I keep my hand on it. I think that it is gettingenough airflow since I modded the case with two 120mm fans in the front. As far as prime goes, I am still going to work on it. I was playing supreme commander.
Is two late yoons on the fron good enough to keep me from having to put a fan on the ram. One is about 8 inches before it blowing air from the front from under the cd-dvd burner. The other is at the bottom.
EDITED: Found a camera lying around. This alright for airflow to RAM?
http://img296.imageshack.us/img296/921/img2413lz7.jpg
part number fo the ram ?
Part number is T6UX2GC5 from ewiz.com, they just went OOS this last hour. They had been up in the hot deals section for at least a week.
Mfr Part Number: T6UX2GC5
Type: DDR2
Capacity: 2 GB (2x 1GB)
Speed: PC5400 667MHz
Size & Bit: 64M x 8
Pins: 240pin
ECC: No
Registered: No
Chips: 16
CL5
Super RIGID, w/ Heat Spreader
Sorry Guys, but DDR900 is the max is it going to hit on 5-5-5-15. I really don't want to go looser on the timings and it will not boot windows at 2.2V. I am thinking it is probablty best for me to leave it at 4-4-4-12. Besides that, my PSU is making a whine with the extra voltage, and that can't be a good thing..... it's an Enhace 500W, the same one as the silverstone 500W 35A 3 V35 5V The rails are 18A 18A.
This is good news. I just got a set today - I'll try them tonight;)
whats the default volt on this man? i newb btw. i put +0.3V and it wouldnt post when i try to lower the timing to 4-4-4-12. running 375fsb on 5-5-5-15 righ tnow
Hate to burst your bubble but I just got some $100 value kingston ram pc2-5300 today. Its running 450mhz 4-4-4-12 at 2.1v :D:D:D
$100 for 2gb? Post a link for what you bought!:cool:Quote:
Originally Posted by ineedaname
sry its was only a single stick of 1gb
PQI Turbo 667 4-4-4-12... nearly a year old, has been abused....
455mhz 4-5-3-5 @ 1.9v
460mhz 5-5-5-15 @ 1.9v
More voltage = lower clocks lol...
Quote:
Originally Posted by ineedaname
It's Ok , you can have your DDR900 :). Hehe, have some new firestixs that rock. I put the Super Talent in a customers build as it was originally intended. I am limited by my E6400 that max's out at 3.2GHZ tops :( . Oh well, change it to Firestixs for the win.
http://img99.imageshack.us/img99/268...124hourmv3.jpg
BOOOO firestix :P ok u got me there. I'm currently only getting 980mhz at 4-4-4-12 2.3v. Doesn't seem to want to push up to 1000. Give me a little time and lets see who's still king :D:D
damn nice results to the both of you guys.
96redformula7...which kit is that, the 6400?
Nope, the DDR-1000 Kit. It is doing that at 2.1V. Actually so far it is up to 1 hour prime stable at 4-4-4-8 2.1V and the same speed as the picture above.
so exactly which firestix are these? like wuts the part number?
Quote:
Originally Posted by ineedaname
answered before
Quote:
Originally Posted by 96redformula7
He asked about Firestix, not SuperTalent.
The ones from the Online Deals and Sales section.
Buffalo 2x1 GB PC2-8000 Firestix, CL5
MICRON D9GKX
nice, i ordered a set also but its on backorder. hopefully it stays D9GKX cause thats a heck of a deal if it is.Quote:
Originally Posted by 96redformula7
Snap, firestix may be nice but at just $235 + shipping for 4 gigs I think this just solidified my decision to snag this super talent and build a nice budget vista e4300 rig.
yup, that price for 4gb's is just insane.
Quote:
Originally Posted by 96redformula7
Boooo d9gkx must cost 400+. my value stick only cost 100 canadian after taxes :p:
As far as I remember the Firestix were at 203$ due to a pricing mistake but people still got it. I believe the price went up a bit though later.
I am able run one of the sticks @ 525MHz 5-5-5-15 2.3v on intel XBX2. The other on can run @510MHz with the saming settings. pretty good for the price. :) I think they may reach higher frequency at 680i or 965 boards.
Check this 667mhz Corsair Value Ram @ 2.2v
http://img92.imageshack.us/img92/1714/3olugarvq3.jpg
nice hum?
Price? 1 gb not 2gb?Quote:
Originally Posted by NtFs
lol you can't call firestix 8000 value ram anymore
D9GKX is a different league xD
This thread has turned astray ^^, from budget minded to badass
what is the stock timings for the supertalent
would u say u just got lucky on the clocks, or what voltage would u suggest if u got lucky... i want to get those things
My OCZ Value Pro PC5400 can do DDR900 with 2.2v, nothing super special but good for the money.
SuperTalent DDR2 667 is @ 852mhz 5,5,5,15 @2.1vcore -- not bad for the price!
what is stock on these (voltage?)
I've got u an even better deal. I've got 2x1gb SuperTalent DDR2 533 on my 2nd rig and they can do 900mhz 4-4-4-12 on a P5NE-SLI with 2.25v memtest stable.Quote:
Originally Posted by spinejam
haha screw the ram in that pic, I want that E6300. mine won't hit 3.4 without 1.5v or moreQuote:
Originally Posted by NtFs
Looking good. I'm getting a pair withing the next few days! No one has MAD anymore! I'll try on am2.Quote:
Originally Posted by superray
like tccd or uccc?Quote:
Originally Posted by Hutch
i've got a set of the OPs memory... looks promising
.. i'll post results when i get my rig fired back up