Intel Core 2 Duo E4300/E4400 Overclocking Results

http://img182.imageshack.us/img182/5458/e43008mb.jpg
4300 SL9TB MALAY
1.80GHz/2M/800/06
Q636A***
Pack Date 27/12/06


2700MHz (9x300)

http://img183.imageshack.us/img183/7...allffts9rs.jpg
e4300 2700MHz (9x300) - 1.325vCore - 2+ Hours Orthos Small FFTs - 16°C Idle/36°C Load


http://img255.imageshack.us/img255/8...rgeffts2cd.jpg
e4300 2700MHz (9x300) - 1.325vCore - 1+ Hour Orthos Large FFTs - 14°C Idle/36°C Load


http://img256.imageshack.us/img256/2...superpiam9.jpg
e4300 2700MHz (9x300) - 1.325vCore - Super-PI 1Mill/8Mill

These results will only be of interest to anyone with a LGA775 board that tops out at the 300MHz-FSB mark. The e4300 chip running at 2.7GHz is officially faster than a full blown 'stock' e6600 . . . Next stop 3000MHz, stand clear doors closing! :D

Note: Just for anyone thats interested I have been using an ASUS P5B-Deluxe Wifi/AP with 2GB Crucial 10th Anniversary and a ANTEC TRIO 550 PSU.

3006MHz (9x334)

http://img265.imageshack.us/img265/1...lffts018pe.jpg
e4300 3006MHz (9x334) - 1.325vCore - 1+ Hour Orthos Small FFTs - 13°C Idle/37°C Load

http://img265.imageshack.us/img265/8...effts014dw.jpg
e4300 3006MHz (9x334) - 1.325vCore - 1+ Hour Orthos Large FFTs - 14°C Idle/37°C Load

http://img265.imageshack.us/img265/8...superpi0ep.jpg
e4300 3006MHz (9x334) - 1.325vCore - Super-PI 1Mill/8Mill

3GHz at Stock vCore thats not bad, machine is nippy as anything! However from here on in gets a bit more tricky . . . Next stop hopefully 3.3GHz, but its gonna need more volts!

Note: vCore that I have been quoting is what I am setting in BIOS.

3303MHz (9x367)

1.325vCore - Machine wouldn't POST. ASUS feature saves the day, power off, flick power switch at the back to off, wait a second to the mobo light goes off . . . flick power switch back on, power up machine and straight into BIOS, like it! :cool:

1.35vCore - Computer POSTs but wont load Windows XP.

1.375vCore - Loads Windows but fails Orthos Small FFTs in 5 mins!

1.40vCore - Fails Orthos Small FFTs after 23mins 48 secs :slapass:

http://img252.imageshack.us/img252/7...tserror9qu.jpg

Ah my bane is here to slay me, it seems the Dread Core 1 has got it in for me. I have read about this situation before where one of the cores is weaker than another, still I'm not done just yet ;)

3303MHz (9x367)

http://img251.imageshack.us/img251/5...lffts011tf.jpg
e4300 3303MHz (9x367) - 1.425vCore - 1.45vNB - 2+ Hours Orthos Small FFTs - 13°C Idle/47°C Load

http://img291.imageshack.us/img291/1...effts018xh.jpg
e4300 3303MHz (9x367) - 1.425vCore - 1.45vNB - 2+ Hours Orthos Large FFTs - 14°C Idle/47°C Load

http://img291.imageshack.us/img291/1...superpi4ox.jpg
e4300 3303MHz (9x367) - 1.425vCore - 1.45vNB - Super-PI 1Mill/8Mill

Gonna let it have a good run in at this point, see if it will produce any errors over a longer period . . .

3303MHz (9x367)

12+ Hours Orthos 'Blend' Test :toast:
http://img254.imageshack.us/img254/4...12hours7ay.jpg
e4300 3303MHz (9x367) - 1.425vCore - 1.45vNB- 17°C Idle/45°C Load

Looking forward to seeing everyones results, especially those people with sophisticated cooling systems. I noticed my load temps dropped very slightly and I'm not sure if its because I was running the blend test, or perhaps the arctic silver 5 I slapped on the e4300 is settling in a bit?

3600MHz (9x400)

http://img253.imageshack.us/img253/9...36ghz1mxd6.jpg

http://img145.imageshack.us/img145/7...36ghz8m7ry.jpg

Not Dual-Prime/Orthos stable yet! :D

http://img249.imageshack.us/img249/1392/kraken9pr.jpg
YS-Tech 120mm 'Kraken'


http://img370.imageshack.us/img370/6...ch120mm5kv.jpg
Thermalright Ultra-120 and YS-Tech 120mm 'Kraken'


http://img249.imageshack.us/img249/9...tocktat1jk.jpg
Baseline Reference Temps - e4300 Stock (1.325vCore) - Idle/Load TAT


http://img370.imageshack.us/img370/9...monotat1ww.jpg
e4300 @ 3.6GHz (1.5-1.6vCore) - Core [0] Only Load TAT

I have never seen a temp gauge fly up so quickly, goes from 30°C to 70°C in about 1/2 a second!

Also the temp monitoring software isn't working properly with the e4300 (MBM, Core Temp Beta 0.94) but TAT still seems ok (they all worked fine with the e6300 and all gave the same result). Based on my recent experience with a e6300 it may be that this new chip runs a bit hotter?, can't be sure though because I used some Arctic Silver 5 (thin spread) for the first time, also the fact that the monitoring software isn't working properly makes me wonder if these chips have different sensors to the regular 6xxx series?

nice to see it will do 3.6GHz, but did you really need to show 30 different pictures?

thx big guy

the guy did nice giving us more detail, i liked it, the processor can be overclocked 100%, so far i only managed to get my e6600 to 3.6 stable, the bad axe is a good mobo, but asus is better, damn i should have gotten it....crap

thanks for sharing.. ^_^

:woot:

Quote:

---

Originally Posted by fullmetal

thx big guy

---

Quote:

---

Originally Posted by erwinz

thanks for sharing.. ^_^

:woot:

---

Thanks for reading :toast:

Your chip pretty much does the same as mine with similar voltages. All in all nice easy oc!

Nice Results.

thanks for the info.

have you compared the E6300 and E4300 when both are overclocked to the same speed yet?

Nice, i actually planned to get me one of these but the shop didn't have one so i took an E6600 over it, glad i did.

As far as bang for buck goes this CPU will be very hard to beat.

Do you think there's more than 3.3GHz orthos stable in it?

Hey Wayne I was wondering if that ultra 120 is clip mounted? If so does anyone know of any good heatsinks for 775s that use screws instead of the clips?

nice setup btw++

Good results there Wayne, I have an identical stepping e4300 (from Scan) but it acts really wierd; temps are all over the place, both cores show different temps and all monitoring software is at odds with each other.

A question:- Your temps are way low, what was the ambient temp?

Quote:

---

Originally Posted by Miwo

Your chip pretty much does the same as mine with similar voltages. All in all nice easy oc!

---

Yup very friendly chip and should be fun for someone who is new to O/C. Come March/April the price on this should make it high in the list for 'bang for buck' cpus

Quote:

---

Originally Posted by Scyth3

Nice Results.

---

There not to shabby, I suspect people were wanting 3.6GHz stable but not sure if that will be possible, lets see some more results and also if a new stepping is released. 3GHz on stock 1.325v and 3.3Ghz on 1.425vCore

Quote:

---

Originally Posted by aiya

thanks for the info.

have you compared the E6300 and E4300 when both are overclocked to the same speed yet?

---

No, I only built my CD2 system 3 weeks ago using an e6300 but I still didn't work out thats chip maximum clock yet as I was concentrating on working out the other components limits (FSB, Mem etc) I will stick the e6300 back in in a few days and see how they compare.

Quote:

---

Originally Posted by Zeus

As far as bang for buck goes this CPU will be very hard to beat.

Do you think there's more than 3.3GHz orthos stable in it?

---

Yes I think so, maybe not much in my chip but I will be slowly pushing it up to find the 'cut-off' point, I think 3.4GHz should be ok but don't really wanna raise vCore much more as the temps go mental. It needed somewhere between 1.5-16vCore to bench at 3.6GHz but dual-prime/Orthos would bomb in seconds!

Quote:

---

Originally Posted by Halvie

Hey Wayne I was wondering if that ultra 120 is clip mounted?
nice setup btw++

---

Yes the Ultra-120 comes with its own backplate and spring loaded screws, its very easy to install. You just need a long phillips screwdriver and its a walk in the park. The Tuniq looks good also but just a little bit to big for me. Btw the Thermalright Ultra-90 and HR-01-775 all come with the black peg mounting system but you can buy the 'proper' mounting kit for those also (its the same thing that comes as standard with the Ultra-120)

Quote:

---

Originally Posted by HermS

Good results there Wayne, I have an identical stepping e4300 (from Scan) but it acts really wierd; temps are all over the place, both cores show different temps and all monitoring software is at odds with each other.

A question:- Your temps are way low, what was the ambient temp?

---

My chip was from Scan also! :)

Only INTEL TAT and the BIOS seem to get the right readings for the CPU temps, all my other apps that worked fine with a e6300 just don't work with the e4300, strange?

The temps I published are accurate, I'm using decent air-cooling kit and as luck would have it Tuesday night was freezing, in fact it started snowing!. I wrapped up warm in about four jackets, opened the balcony door and let the freezing air take over my home, all in the name of overclocking, my poor cat wondered what the **** was going on and hid under the duvet on the couch :D

http://img244.imageshack.us/img244/5...testing2vw.jpg

Yes I stayed up all night and freezed my backside off, obviously as I worked through the night the temps were dropping so thats how come my idles are lower (even at higher overclocks), it just got colder and colder . . .

If you look closely at the screens I published, in the system tray (bottom right) you can see my GPU temps from ATT (ATI-TrayTools) and also the time the screens were taken.

http://img178.imageshack.us/img178/7...andtime5pk.jpg

P.S:Anyone please feel welcome to post your e4300 results here! 750 pixels width works well for screenies :toast:

25F = ambient temp......heheh

my ambient temp ATM at 1am is 25C LOL but i can still prime at 3.8Ghz with the E6600 :p: 1.47v heheh on air of course

i reckon 4GHz easy prime with those ambients :banana: i'm jealous :D

I'm using 3.48GHz for 24/7 use at 1.49v, Orthos Small FFT priority 9 for over 12 hours stable. My benches at 3.6GHz+ are in my hwbot link if you are interested
XBX2 powa :)

Nice one Big.Wayne :toast:


You can check out my testing/bench of my E4300 Allendale here
Seems like both chips are practically identical though mines a week 40

Ambient temps were mid 30's (thats Celsius :eek: ) so you can imagine what happened when loaded pumping 1.60Vcore into the poor little chip :explode2: :shock2: :D

I too had varying readings that initially were all over the place and when I pointed this out i was told by a number of ppl that I have NFI :rolleyes: .....................yer right :p: :slap: :D

Quote:

---

Originally Posted by Miwo

I'm using 3.48GHz for 24/7 use at 1.49v, Orthos Small FFT priority 9 for over 12 hours stable. :)

---

Very good! If you get time please post up some result screenies here. Also I noticed you are using the Silverstone LC20S case, I just built two HTPC's using that chassis, very nice! :)

Quote:

---

Originally Posted by alpha0ne

Nice one Big.Wayne :toast:

---

Nice one to you too alpha0ne, sorry about posting a similar thread, I did have a quick look but for some reason I didn't see yours?. I have since read it through and find your results interesting.

Keep up the gOOd work, laters! :toast:

Quote:

---

Originally Posted by Big.Wayne

Nice one to you too alpha0ne, sorry about posting a similar thread, I did have a quick look but for some reason I didn't see yours?. I have since read it through and find your results interesting.

---

I will be doing a few runs using the x8 multi tomorrow if I dont melt in the forecast 41C :eek:

I will be posting my results @ i4memory if you are interested, there are a couple more e4300 chips being tortured there too :banana:

Ohhhh just noticed 999 posts :D

We need more people posting with various results from E4300/E4400's. I was going to hold off for one of these and said forget it and got my 6400. Crazy that this cpu I have is 100% stable with 1.26V at load @ 3.3ghz. Coming from an X2 4400+ that took 1.6V for 2750mhz.

I ended up getting my rig figured out. I don't know why but I think there was something in the case shorting it out. I took it apart and put it back together and since I did that it has been running fine. Can run pretty much like Waynes in his last pick. Right now its at 356 x 9,
2.00 on the memory divider,
memory settings are 4-4-4-12.
1.42vcore..testing at 1.38 seems stable so far about half hour of memtest and 32 super pi. Gonna go play some CS and see if it holds up
+.04 on the ram

played CS for like two hours on it and did the 32m super pi several times. Feels really solid. I had it running at 3.4 but with 1.50 which I didn't think was worth the extra stress on the chip.

Could post picks but just look at the last ones wayne posted lol.

btw thanks for the info on the hs Wayne.

I ran a few tests using the x8 multi this morning and found that I could run @ 3.20GHz torture stable using .0125 less Vcore than when using the x9 multi ?????? :confused: :confused:


Anyone tried this yet ??

Sorry to revive an old thread, but I've got the same stepping on my E4300...SL9TB...and this was a nice read and hopefully mine will perform similarly.

People if you read the tempo with various programe you can see they have all diferente reading.

The better i have find was Riva Tuner win C2D temp plugins :D

about to order one of these, think its worth the extra $25 for the e4400 for the chance of getting an earlier steping? (I dont think they sell as well as thr e4300s)

Heres my E4300. (watercooled) :cool:

http://www.hwbot.org/result.do?resultId=594523

http://www.imagewoof.com/view_thumb/...pnuclearus.jpg

http://www.imagewoof.com/view_thumb/...mhzOC88gtx.jpg

Nice stuff everyone.

So far, my E4300 with stock cooling on the ICFX3200 is 2.9GHz Orthos stable. I dunno if maybe my temps are way out of what, but I'm at 1.325v and 2.9GHz loads @ ~ 70C, loading at 73C now at 3GHz.

Oh well, gonna see what I can do with stock cooling before getting an Ultra Extreme.

wow nice stuff guys!

i am amazed by that sort of ambient temps! wow 19 on a cpu! cant ever get them here in Singapore. ambients here about 32 degrees celcius.

thinking of getting a low cost cpu for fun. seems like 4300 sounds like a winner!

My E4300 is Orthos stable @ 3.2Ghz (400*8) with 1.375Vcore. And does 3.9Ghz max suicide screen with 1.7Vcore. All with boxed cooler. Although it's now watercooled and with no IHS :)

im getting 3.6ghz with 1.55v but not stable. :confused: Too much vcore for this clock.

http://valid.x86-secret.com/show_oc.php?id=199459

Well, hopefully I've still got some room left with this thing.

Still using the stock cooler and stock thermal paste and I can do Orthos Small FFT's for over 8 hours at 3.1GHz with only 1.325v. This is with 18C room temps, and I also figured out that my load temps aren't as bad as I thought, I was using version 0.95 of Core Temp, which some people have had issues with, I'm actually at about 59C on load. Runnin' Small FFT's at the moment at 3.2GHz stock voltage, hope all goes well.

I can't wait to get a Thermalright Ultra 120 Extreme and install it on this chip once I've taken off the IHS. :cool:

Well, I've done 9+ hours @ 3.2GHz 1.350v now...still going.

Quote:

---

Originally Posted by Cornelious0_0

Well, I've done 9+ hours @ 3.2GHz 1.350v now...still going.

---

What´s the batch of your E4300 ?
I would like to know to check for some here:shrug:

Just received an e4400 from newegg (ordered on the 22nd)
Q640a534A534 Malay with a pack date of 3/27/07
will post results once I throw together a test rig

Quote:

---

Originally Posted by Counter CS

What´s the batch of your E4300 ?
I would like to know to check for some here:shrug:

---

Stepping: SL9TB
Batch: Q702A472
Pack Date: 04/12/07

Interesting that I have not seen many E4300's in circulation among the overclocking community as new as mine. I live in Canada and got mine from NCIX...awesome CPU.

I will try the boxed cooler in a minute. Have to remove motherboard out of case. Will take pics of my naked cpu :)

Finally got the boxed cooler on my naked cpu :D Temps are a little better compared to watercooling en boxed cooling with IHS. Here are the screens:

First my setup with watercooling:
http://img510.imageshack.us/img510/4...2993yq3.th.jpg

Cpu with copper plate that I had to use or else the waterblock wouldn't make contact:
http://img530.imageshack.us/img530/9...2996vj5.th.jpg

The E4300 with shim:
http://img502.imageshack.us/img502/7...2997js2.th.jpg

The IHS:
http://img169.imageshack.us/img169/3...3004ss1.th.jpg

CPU again:
http://img521.imageshack.us/img521/4...3005lr0.th.jpg

Had to get MOBO out of case before I could mount boxed cooler:
http://img527.imageshack.us/img527/3...3008jl8.th.jpg

Cooler hits core (Atleast that's what I thought ;))
http://img508.imageshack.us/img508/3...3016in0.th.jpg

Everything oke:
http://img508.imageshack.us/img508/9...3020cx0.th.jpg

Booted for 1 second. So I reset bios. Still no boot. Tested with another CPU and it worked. So I check contact again. Boxed cooler has weak contact because of mechanism. So I tryed something else:
http://img516.imageshack.us/img516/9...3022oz1.th.jpg
It's a copper plate.

But didn't work to good. So tryed yet something else:
http://img522.imageshack.us/img522/9...3023jy2.th.jpg
Removed the mechanism and build something of my own:

http://img184.imageshack.us/img184/9...3026aj3.th.jpg

So now the temps:

With IHS boxed cooling 1.375Vcore
http://img527.imageshack.us/img527/8...sseddk6.th.jpg

Without IHS watercooling 1.365 Vcore
http://img243.imageshack.us/img243/3...1365rp9.th.jpg

Without IHS boxed cooling 1.375 Vcore:
http://img185.imageshack.us/img185/8...gnewzh8.th.jpg

And this is with 1.45Vcore and boxed cooling:
http://img185.imageshack.us/img185/3...coreia2.th.jpg

Little bit better temps as you can see. Now I only need a good waterblock or aircooler.

I recently got an e4400 with the $20off Paypal deal at Newegg. Was hoping for an M0 but I got an L2 CPU with an older pack date, I guess the M0 e4400 won't be through the channel for a while. Anyway I'm wondering if it's worth keeping? I have not opened it (I know - each CPU is different and needs to be tested) but is this batch known to be especially good or bad for e4400?

SLA3F
Q702A917
pack date 5/22/07

I'm looking to do 3-3.2GHz on quiet air with moderate voltage and temps, it's for a secondary build. Is this one a keeper or should I return and just get an M0 e4xxx or e2xxx later?

Isn´t "SLA3F" a G0 ? :confused:

Quote:

---

Originally Posted by MadMan007

I recently got an e4400 with the $20off Paypal deal at Newegg. Was hoping for an M0 but I got an L2 CPU with an older pack date, I guess the M0 e4400 won't be through the channel for a while. Anyway I'm wondering if it's worth keeping? I have not opened it (I know - each CPU is different and needs to be tested) but is this batch known to be especially good or bad for e4400?

SLA3F
Q702A917
pack date 5/22/07

I'm looking to do 3-3.2GHz on quiet air with moderate voltage and temps, it's for a secondary build. Is this one a keeper or should I return and just get an M0 e4xxx or e2xxx later?

---

SLA3F 2 GHz E4400 06 800 MHz 65 nm L2 2 MB LGA775

I've found a few Q702* results that look decent enough although the e4xxx chips seem pretty hit and miss, none with the specific batch code though. Any other input?

Got my e4400 SLA3F (Q705A394) a week ago. Running @ 3.15GHz for now but have done some benching at 3.25. 3.3 seems difficult with my chip, hit very high temps also at that freq (using tuniq tower).