Xtreme Twinmos Memory!

Printable View

Show 100 post(s) from this thread on one page

03-18-2005, 11:03 AM
Negative Design

Quote:

Originally Posted by qk4722

Not bad. 05094 this week can run 260 2-2-2-5 1T at 3.3v.
PCB is KO-6633

Ok its official then,I need a new mobo!
I have SAME stick as you lol. KO-6633 05094 50D too both my sticks are...but second sticks sucks badly.
03-18-2005, 11:12 AM
enok

his sticks are actually 44B. the usual UTT (CH-5) are D. (as far as i remember)
nice results btw. :)
03-18-2005, 11:14 AM
Negative Design

Quote:

Originally Posted by enok

his sticks are actually 44B. the usual UTT (CH-5) are D. (as far as i remember)
nice results btw. :)

Thanks :) gonna get rid of em...
I should of gotten TMSP instead lol
03-18-2005, 11:32 AM
TEDY

first try them out.
03-18-2005, 11:32 AM
qk4722

2 Attachment(s)

Updata !

3.6v DDR540 2-2-2-5 1T pi1m pass &
3.8v DDR560 2-2-2-5 1T Memory Bandwidth Benchmark.
03-18-2005, 11:35 AM
TEDY

qk4722 are you comftorable running 3.6-3.8v on DFI NF4 ???
how're you colling ram??
and most of all please run #5 memtest also :)
03-18-2005, 11:48 AM
Tibu

I'm reading the 90+ pages of posts on this topic but thought I might ask and be sure;

Basically all of the Speed Premiums are UTT correct? The same UTT OCZ uses and so on?

I ask cuz my kid brother wants to get into Overclocking his unlocked Barton and I'm thinking about buying him some semi good overclocking ram and this might be it, so I wanna be sure.

EDIT

Woops, seems only the AA4T is UTT.
03-18-2005, 12:48 PM
enok

Quote:

Originally Posted by Negative Design

Thanks :) gonna get rid of em...
I should of gotten TMSP instead lol

likeTEDY said, try them! :P it might do a good oc aswell.
03-18-2005, 01:13 PM
nebuchanezzar

Quote:

Originally Posted by Tibu

I'm reading the 90+ pages of posts on this topic but thought I might ask and be sure;

Basically all of the Speed Premiums are UTT correct? The same UTT OCZ uses and so on?

I ask cuz my kid brother wants to get into Overclocking his unlocked Barton and I'm thinking about buying him some semi good overclocking ram and this might be it, so I wanna be sure.

EDIT

Woops, seems only the AA4T is UTT.

The OCZ is all UTT but so far only ATACOM seems to stock them...
03-18-2005, 01:16 PM
situman

isn't the new Bh5's coming out? why spend money on "CH5?" I guess people have too much money these days :)
03-18-2005, 01:18 PM
Negative Design

Quote:

Originally Posted by enok

likeTEDY said, try them! :P it might do a good oc aswell.

I will...right after I sell the TmIIs lol Hopefully it will be in stock when I get my $$

Whens this new BH5 coming out??!?? :confused: :confused: got links?
03-18-2005, 05:41 PM
Valhalla

Just got my two 1 gig kits of TmIIs from NewEgg today. They are UTT sticks with AA4T code, week 9 of '05 (05094). Can't wait 'til my other parts come in for the new rig to test them! Couldn't go wrong at $105.50 per gig for UTT :) and I bought two gigs hoping to get at least two "better than average" sticks out of the four.

Question to all: In looking at Spare-Flair's pictures of TMSP on page 96 of this thread, I noticed and was wondering about two things...

1) My TMII's and his TMSP's have the exact same model number of M2G9J16A-TT. Why would that be? Also, interestingly, the part number varies by only one digit (in the middle of the P/N, his(all?) TMSP reads ...TTFF... and my TMII's read ...TT9F...)

2) On the farthest upper right corner of the PCB, the TMSP's have what look to be 8 contacts, but no chip. Just below this is where a small 8-leg chip is soldered (right side of stick in middle). My TMII's have a larger chip placed in the farthest upper right position where the TMSP is vacant, and no chip in the right middle position where the TMSP does have one. Would anyone know why there is this difference between the two? By the way, the PCB numbers (KO-6633) are the same for both the TMSP and the TMII.
03-18-2005, 05:51 PM
Tibu

So basically it's a dice throw when ordering from newegg whether you'll get UTT or or not?

Cuz the pic they have for the 512mb modules of SP have code AADT, which from my understanding is not even Winbond chips; but the 256mb modules in the pic they have AA4T and the two dots.
03-18-2005, 05:58 PM
esdee

Quote:

Originally Posted by qk4722

TwinMOS BH-5 PC3600...

do they act like BH5 ? the only difference between BH5 and UTT is that BH5 can do trc=7 ,TRFC=12 in much higher MHz

can you test at 265with 2-2-5-2-7-12-2-2-1-1 ?
03-18-2005, 09:06 PM
uwackme

hmmm

We'll know in a few days, NewEgg got my RMA and shipped out replacements for the bad TMII set. Hope they are UTT.
03-18-2005, 09:16 PM
qk4722

1 Attachment(s)

Quote:

Originally Posted by esdee

do they act like BH5 ? the only difference between BH5 and UTT is that BH5 can do trc=7 ,TRFC=12 in much higher MHz

can you test at 265with 2-2-5-2-7-12-2-2-1-1 ?

Here we go! ;)
03-19-2005, 02:53 AM
esdee

Quote:

Originally Posted by qk4722

Here we go! ;)

thanks :toast:
nice ram there
03-19-2005, 11:52 AM
Gorod

http://www.newegg.com/app/ViewProduc...218-062&depa=0

Testing this ram right now , 241MHz @ 2.0-2-2-5-1T @ 3.7V so far . Good ram for 100 $ . ;)

http://img7.exs.cx/img7/1787/twinmos0021kd.th.gif
03-19-2005, 02:16 PM
enok

that's extremely high voltage for such a poor oc... :stick: most UTT should do that at 3.1v. (atleast i do)
03-19-2005, 02:22 PM
Raybo

Just recieved the same sticks as Gorod, one errored out at default settings so they are going back.

They use the "Windbond" modules so hopefully I will get the same chips on my RMA. :toast:
03-19-2005, 03:47 PM
Gorod

:confused: I am sorry guys , but the memory won't pass Super PI 32M at 2.0-2-2-5 . Rock stable only 2.0-3-2-5 @ up to 245MHz , so its not Winbond UTT ??? 245MHz @ 2.0-3-2-5-1T @ 3.3V what kind of chips are those ? I will try lowering voltage later :mad:
03-19-2005, 03:49 PM
Negative Design

try raising voltage...
if it sez AA4T its UTT according to earler pages,are you on 1T or 2? NF2 or A64?
03-19-2005, 04:48 PM
JDizzle

So the new Twinmos Speed Premium is BH-5 or CH-5?
03-19-2005, 05:26 PM
Gorod

nForce3 Ultra @ 1T . I tryed to raise up voltage (up to 4.0V !!!) , still crashing with 2.0-2-2-5-1T @ any speed , but it works fine with 245MHz @ 2.0-3-2-5-1T @ 3.3V
03-19-2005, 06:17 PM
situman

actively cool it. gets mighty hot

Show 100 post(s) from this thread on one page