Oh i see, heh weird your name is the same as my PC's XDQuote:
Originally Posted by Koen
Printable View
Oh i see, heh weird your name is the same as my PC's XDQuote:
Originally Posted by Koen
Interesting pump wished everyone had the same opportunity :rolleyes:
It's only one minus of this pump... It's 230V input ;/
And lower flow than DDC
But it's quiet, u know becouse u had one ^^
But not ideal quiet:P
hmm, so tell me what pump is ideal quiet for u mate :)
ALL when are turned OFF :D
Right, just looked at your system and thought of some ideas...Quote:
Originally Posted by l33t p1mp
You can use a 1 inch hole saw to make the following openings and then put a gromet into the hole so that it doesnt cut you open whilst your fiddlin around.
1st Hole: cpu power cable and fan cable (rotate 1/4 turn clockwise so that fan cable is closer to the opening)
2nd hole: Psu and IDE cable (it will go through with some Persuasion!!)
3rd hole: GPU, pump and sata cable
4th Hole: USB connectors and jump leads
Once all the leads are at the back of the MB tray, tye them together so that it sits behind the 5.25 cage
This should hide most of the cables for you. Hope this helps!! :)
thought Id share some daylight pics of de girl!!
Sweet, thanks. Ill try that when I get back from vacation, but I wanted some advice before I got home lol.Quote:
Originally Posted by ka lok
Enjoy your hols mate :cool:Quote:
Originally Posted by l33t p1mp
Nice ka lok! Are those bay covers from Lian-LI? Do they fit snug?Quote:
Originally Posted by ka lok
Yep they are lian li and they fit as snug as a bug in a rug! :DQuote:
Originally Posted by twwen2
I like the loop in that TJ.
One question real quick
Im planning on using 8 fans for a Feser rad 480 once it comes out
However, rad only comes with 16 screws for 4 fans and I would need 16 more screws to mount 4 more fans on the other side of the rad
Which size should I buy out of all of this? (Preferibly, same size as the ones that come with the rad)
http://www.sidewindercomputers.com/spsc.html
Thanks!
I want those fans where did you get em? or better yet what are they called?Quote:
Originally Posted by WarFront2142
They look like Nanoxia fans.Quote:
Originally Posted by silverphoenix
You can buy it hereQuote:
Originally Posted by silverphoenix
http://www.aquatuning.de/index.php/c...8_Nanoxia.html
@ slim142
looks like m4 x30mm should work with 25mm fans.
But what about that ? => http://nanoxia.de/Quote:
Originally Posted by WarFront2142
So this one should work with no problem (Yate Loons 120x120x25)Quote:
Originally Posted by sargatanas
http://www.sidewindercomputers.com/ststma15in4t.html
could be a bit too long, looks like m4x40. but they could be ok if u need to mount the rad on ur tower with theses ones.
Im think Ill just get the rad and bring the screws to a store to match them. Dont want to have any kind of problems just for been lazy :yepp:Quote:
Originally Posted by sargatanas
2 screws in each fan on diagonals, not gonna go anywhere, and free! ;)Quote:
Originally Posted by slim142
CD...
What's that ugly piece of crap case to the left?
(joke, I wish I had one)
Anyways, this is one of my favorite cosmos builds.
what headphones are you sporting there cyber?
AKG K701 I love em.
Yeah now that Soldam is out of business my XR-1 is a collector's item.
FlyingA2 will finally be taking that beast home...it's been running up my AC bill...
In working order! Check it!
cyber whats your electric bill like with all those computers lol
Vortex very nice!!!
That tube on your gpu block was cut crooked NOOOOOOOOOOOOOOOOOOOOOO lol or not pushed all the way down
I know, I know.....sticks out like a sore thumb.....At the time I didnt have any extra tubing, when I got more, I forgot about it, then filled the loop....Doh!
Hi guys!
Check out my first ever build:
Tygon R3603 - HighFlow - 1/2 ID - 3/4 OD - Clear
2x Thermochill PA120.2 Dual
Feser One Cooling Fluid - UV BLUE
Laing D5-MCP655 12V
13MM (1/2) EK High Flow Fitting - G3/8
Thermochill FG120.2 Dual Grill
DangerDen Silver Fillport
13MM (1/2) Feser fitting
Revoltec Ultra Bright Cold UV Light
EK-Supreme Plexi
EK-NB S-MAX - Plexi
EK-SB 780I
TFC Herbie Clip
Plexi G1/4 lightmodule
Anti Knikveer 19.1MM (1/2)
120MM Fan Grill Chrome x 2
EK-Mosfet 780i - Plexi
4 x Yate Loon 120MM
Thermosensor G1/4 with Display
Zwikkie AC Ryan acryl uv plexi
EK-Multioption Reservoir rev.2
Intel Core 2 Quad Q9450 (@3,6)
EVGA 780I
4x Crucial BallistiX Tracer 1 GB DDR2-1066 CL5
Asus GeForce 280 GTX
2x Western Digital Raptor 74 GB (vista)
Samsung F1 (Data)
Creative Sound Blaster X-Fi XtremeMusic
Cooler Master Cosmos 1000
Samsung SyncMaster 205BW
Zalman ZM850-HP
4x Sharkoon Silent Eagle 1000 120 mm
zalman zm-mfc2 fancontroller
Begin:
http://www.mijnalbum.nl/Foto-PVV7FKDC.jpg
cosmos demolition:
http://www.mijnalbum.nl/Foto-HIMEUG4Z.jpg
Almost there:
http://www.mijnalbum.nl/Foto-3Q43ABVB.jpg
front:
http://www.mijnalbum.nl/Foto-OJUEBSUD.jpg
And yes, I know my res is a little off. Still waiting on the EK 280 GTX block so I can finish the cooling part. Next step is cable sleeving en fix a couple of uv lights.
Greetings from Holland
Cptn Vortex great build ! What tube is it ?
Cptn Vortex, Nice case....who makes it and where'd you get it?
@Matic
Nice build! havent seen a nice fan controller like that one.
And this and my LC. Last revision in this casing:)
http://images31.fotosik.pl/312/fb91c9a2de2c51b6m.jpg
http://images32.fotosik.pl/313/595a681ca51c85d7m.jpg
http://images26.fotosik.pl/244/17b59c7a65c24d5bm.jpg
http://images30.fotosik.pl/245/37eeb00359c668e6m.jpg
http://images24.fotosik.pl/245/6a0837acaef78bcam.jpg
http://images28.fotosik.pl/245/f9076f63d6da4cc6m.jpg
http://images24.fotosik.pl/245/5d460f89f3c1e8efm.jpg
http://images26.fotosik.pl/245/515170ca40103127m.jpg
http://images33.fotosik.pl/316/ce4fd6098bee8eb5m.jpg
http://images33.fotosik.pl/313/f92d279a45b42b86m.jpg
http://img211.imageshack.us/img211/4...5474dw4.th.jpg
http://img177.imageshack.us/img177/8...5470rk5.th.jpg
http://img166.imageshack.us/img166/7...5468yu2.th.jpg
http://img177.imageshack.us/img177/7...5479zn6.th.jpg
http://img211.imageshack.us/img211/3...5467fq7.th.jpg
It was done bt the help of this magnificent forum...
hope u like it..
And i am all ears for any suggestions on this build.
http://img166.imageshack.us/img166/8...5480sr0.th.jpg
Coldy,
Im planning on getting that fan controller, could you tell me, are the lights really bright when in full speed or are the people reviewing the product exagerating?
Also, how was your experience with that controller? Any problem?
Finally, where did you buy it? Did you get the second revision? (with foam underneath the chip)
@ rafwlkp : Its Feser 1/2"ID 3/4"OD Acid Green UV tube. I love it. Just wait till I get some UV cathodes in there....it will glow like Chernobyl.
@ Waterlogged : It WAS some form of old Chenbro case...Check my basic work log. http://www.xtremesystems.org/forums/...d.php?t=193989
Very nice plumbing, can I ask what type of barbs your using and is that hose 3/8 or 1/2?Quote:
Originally Posted by seba84_2005
the hose is Tygon 8/11.2cm:)
Fittings?Quote:
Originally Posted by seba84_2005
Couple shots of my Mountain Mods H2G0 setup:
http://i79.photobucket.com/albums/j1...d/CIMG1557.jpg
http://i79.photobucket.com/albums/j1...d/CIMG1555.jpg
http://i79.photobucket.com/albums/j1...d/CIMG1560.jpg
Got the 4870 on water today with the D-Tek GFX2.
man i keep seeing these new setups a lot, but there all so good.
get a pic of the video+gfx2 in action :D:D
Lots of nice new designs in here.
mstrmold,
can you post more pics please? I'm thinkin'of buying a h2g0 case...
Everybody that has a h2g0 PLEASE POST PICS! I want a white one! :D
Thanks. :( Too bad I can't find it anywhere anymore. It'd make a nice addition to my YY-0221.:yepp:Quote:
Originally Posted by Cptn Vortex
This is my first system:
YbrisŪ One
Ybris Aircube X2 120
Tecnofront Visual Bay
Hydor Seltz L30 II
Lunasio X1
http://www.mrcnetwork.it/gallery/dat...6/100_1425.JPG
http://www.mrcnetwork.it/gallery/dat...6/100_1427.JPG
http://www.mrcnetwork.it/gallery/dat...6/100_1448.JPG
http://www.mrcnetwork.it/gallery/dat...6/100_1449.JPG
http://www.mrcnetwork.it/gallery/dat...6/100_1455.JPG
http://www.mrcnetwork.it/gallery/dat...6/100_1458.JPG
http://www.mrcnetwork.it/gallery/dat...6/100_1378.JPG
and this is the second:
YbrisŪ A.C.S. BLACK PEARL Cromo
Hardware Labs Black Ice 240 GTS
Tecnofront Airbox rev1
Laing DCC 500 12V 1PlusT
Swiftech MCRES-Micro reservoir
Lunasio X1
http://www.pctunerup.com/up/results/...05153827_0.JPG http://www.pctunerup.com/up/results/...05153856_1.JPG http://www.pctunerup.com/up/results/...05153911_2.JPG
http://www.pctunerup.com/up/results/...05153929_3.JPG http://www.pctunerup.com/up/results/...05153944_4.JPGhttp://www.pctunerup.com/up/results/...05153957_5.JPG
http://www.pctunerup.com/up/results/...7_100_1581.JPG http://www.pctunerup.com/up/results/...3_100_1583.JPG http://www.pctunerup.com/up/results/...4_100_1584.JPG
http://www.pctunerup.com/up/results/...0_100_1585.JPG http://www.pctunerup.com/up/results/...9_100_1586.JPG http://www.pctunerup.com/up/results/...6_100_1596.JPG
http://www.pctunerup.com/up/results/...6_100_1624.jpg http://www.pctunerup.com/up/results/...7_100_1604.JPG http://www.pctunerup.com/up/results/...4_100_1605.JPG
http://www.pctunerup.com/up/results/...1_100_1607.JPG http://www.pctunerup.com/up/results/...0_100_1608.JPG http://www.pctunerup.com/up/results/...7_100_1615.JPG
now with Feser One TFC Xchanger - Double Radiator 240
http://www.pctunerup.com/up/results/...9_100_1646.jpg http://www.pctunerup.com/up/results/...1_100_1642.jpg http://www.pctunerup.com/up/results/...5_100_1634.jpg http://www.pctunerup.com/up/results/...8_100_1639.jpg
Wow... Cable management went really weird, they're all sleeved but none hidden :P Bah if that's the look you're going for then go for it :)
I have a worklog for this case in the worklogs section, but though I'd post the finished pics here in the gallery:
http://i300.photobucket.com/albums/n...e_final060.jpg
http://i300.photobucket.com/albums/n...e_final061.jpg
http://i300.photobucket.com/albums/n...e_final062.jpg
http://i300.photobucket.com/albums/n...e_final093.jpg
http://i300.photobucket.com/albums/n...e_final098.jpg
http://i300.photobucket.com/albums/n...e_final110.jpg
http://i300.photobucket.com/albums/n...e_final111.jpg
http://i300.photobucket.com/albums/n...e_final088.jpg
Can you pick out the three constellations?
http://i300.photobucket.com/albums/n...e_final077.jpg
http://i300.photobucket.com/albums/n...e_final082.jpg
Hope you like it... seems like I'm not the only one with gpu-only blocks pointing towards the front of the case ;)
PS iandh... wonderful case there, really clean, excellent :up:
Iandh: That is a work of a perfectionist, really that's one fine computah :up:
Most impressed by the Pwr/rst-buttons, that is just lovely. And btw; is that starchart accurate? Is "starchart" even the correct translation?:shrug:
man this is... beautifull!!!Quote:
Originally Posted by iandh
love those power/reset switches :)
Ian - wow...
iandh
sexy details!
iandh
You need to tell me right now sir where you got those lights (Constellations) cause that is HOT. Nice job!
PC70? :up::up: can u post more photos?Quote:
Originally Posted by Garrett
@ iandh: I like what you did with the Scythe controller and front plate! Very nice :cool:
Thanks all!
Yeah, I think it looks way cleaner in some loops. Your build looks pretty clean, and plenty of further tinkering potential.Quote:
Originally Posted by Garrett
There are the constellations Capricornus, Libra, and Ursa Major. They are correct, but the rest of the stars are just random.Quote:
Originally Posted by Blundie
They actually are fiber optics lit by white LED's. If you look in the worklog section of this forum you can see exactly how I did it.Quote:
Originally Posted by slim142
Yeah, that turned out pretty nice. The cool thing is that if I choose to in the future, the front is pre-cut for a MCR220.Quote:
Originally Posted by twwen2
iandh just wow i love your work and good idea with the earth and stars :P
Zodiac Project is one of the nicest ones I ever seen. The space effect made me fell in love with your case man. Thats just something I never thought about and now that I see it, is just unbeliavable how cool it looks.
Iandh fantastic work! love it
Added another loop to my system.
1)D5+PA120.3+Fuzion V1
2)D5-B+BIP II+EK FC8800+MCW30.
http://i26.photobucket.com/albums/c1...e/DSCF0441.jpg
http://i26.photobucket.com/albums/c1...e/DSCF0435.jpg
http://i26.photobucket.com/albums/c1...e/DSCF0436.jpg
http://i26.photobucket.com/albums/c1...e/DSCF0438.jpg
http://i26.photobucket.com/albums/c1...e/DSCF0440.jpg
And my back up rig. Eee PC 2G Surf hooked up to my 24".
http://i26.photobucket.com/albums/c1...e/DSCF0442.jpg
Wait an eeePC with a 24" ????
Overkill much :p:
It was easier then bringing another PC from across the house, and it is the only laptop I can use until I get my new one. Only problem was that the Eee only outputs 1024x768.Quote:
Originally Posted by MomijiTMO
Hence the overkill. One icon looks to be the size of my fist on that screen lol. At least you know you can't accidentally click on the wrong app.
iandh very nice case. gives me a nice inspiration for the front of my case.
iandh, what would you 'tinker' in this case?
Here's a clearer pic of what it looks like now :)
If anyone has questions whatsoever just ask :)
iandh, your work is pure skillz. Alltough I don't really understand what's with those colored stripes in the frontpanel and other parts? I mean, they look nice but the color choise is bit weird for my eyes at least.
Despite of that, I am a big fan of such a craftmanship.
knet370 more photos pls :) Where did u get this 90* fittings ?
Nice case Knet370. :)
Iandh, that case is just brilliant! Even though the form of it isn't my taste, I would love to have that one sitting on my desk due to all the details, that start sky is beautifull, and the front and the power and reset buttons and I could continue, I really, really love the details in that one :)
This is some REAL nice pc :banana::banana::banana::banana:, congrats, i love it :up:Quote:
Originally Posted by knet370
Are those seperate LED's or the 4 led fans? Looks pretty sweet
@knet: got plans of changing the ram cooler's leds? the color kinda doesn't work with your tubes
Nice rig!
I hate people who has their own cnc machine :mad:Quote:
Originally Posted by iandh
Am I jealous? :p:
Seriously nice modding :up:
That "Power/Reset" button is INSANE!!!
Good work!
Simply. WOW.
Awesome job there mate!
Some pics of my case :
http://img502.imageshack.us/img502/8866/ganz1sh2.jpg
http://img372.imageshack.us/img372/7348/ganz2xm6.jpg
http://img293.imageshack.us/img293/7447/ganz3zq0.jpg
http://img372.imageshack.us/img372/3175/blende2wu8.jpg
http://img355.imageshack.us/img355/2570/bel2yw4.jpg
http://img515.imageshack.us/img515/3749/bel1kc4.jpg
http://img294.imageshack.us/img294/8980/ganz5vk9.jpg
The next step will be a window made by a CNC and a new frontplate designed by myself :
http://img90.imageshack.us/img90/716...vornneuzp8.jpg
hmm...nice case and setup...may be not exactly the XS tubing OD/ID :D
edit: oh you also got an Eheim pump, very unusual here ;)
Yeah, its a factory modded Eheim, this pump is called HPPS + ;)Quote:
Originally Posted by Logos4
Really lownoise and has enough power.
Its 10/8 mm tubing but i like it, not a fan of those 1/2 " sausage-tubes :p:
Winni very nice setup. What res is it ? It isn't EK...
And nice project of custommade frontplate, congratz m8 :)
It`s a Cape Corp Coolplex Pro 10 external ->
http://www.aquatuning.de/product_inf...-external.html
I´m glad you like the design of the frontplate :)
EDIT: Yay, I grow up and lived the first 11 years of my life in Poland too ;)
I was planning a very similar setup but I hessitated when told my eheim 1048 wouldn't have enough juice for 2 rads and 3 blocks. And you have yours with 4 blocks and 10/8 tubing :shrug:Quote:
Originally Posted by Winni
Are you getting good temps with that? Any problems?
BTW love that murderbox style front
Its a modded eheim, its called Innovatek HPPS + 12V,here the link : ->
http://www.aquatuning.de/product_inf...-12V-Pump.html
The flow in the system is not a problem even with the restrictive EK Supreme, the water in the res is always blubbering strong.
The Q6600 @3,4 Ghz and 1.325V is 35°C@ Idle and 46-47°C @ load.
The 8800GT @ 700/1030 Mhz ist idle @36°C abd load @ 44°C.
The components :
1 x 120mm Radiator
2 x 240mm Radiators
1 x Innovatek HPPS + 12V Pump
1 x Heatkiller NB
1 x Heatkiller SB
1 x Heatkiller Mosfet
1 x Zalman 8800Gt Fullcover
1 x EK Supreme
1 x Caper Corp Coolpelx 10 Reservoir
Pump -> 120mm Radiator -> 240mm Radiator -> EK Supreme -> Heatkiller Northbridge block -> Heatkiller Southbridge block -> 240mm radiator ->
Zalman Fullcover 8800GT Block -> Heatkiller Mosfet Block -> Cape Corp 10 Reservoir
EDIT: It doesnt matter which tubing you have, everything over 10/8mm does not increase the flow or makes better temps.
The same goes for the pump, ist enough when the water circualtes with 60L/ hour, everything more does not make better temps.
( an exception are blocks like the D-Tek Fuzion, there the higher flow makes better temps )
Winni, what are you using to house your hard drives?
Im using a box for the HDD, its called Scythe Quiet Drive :Quote:
Originally Posted by lyl
http://img183.imageshack.us/img183/3...hddcoolqj4.jpg
Its one of the best AND cheapest boxes existing, it won much reviews against other boxes. The price here in germany is about 30 Euros.
Winni, I have to admit that for a new poster @ XS, your posts are just it ;)
Sry but i kinda dont get this sentence xDQuote:
Originally Posted by Logos4
Its meant to be positive or negative ? :p:
Sry for my bad english... ^^
very positive ;)Quote:
Originally Posted by Winni
Ooo, thank you, really appreciate it :)
@Winni
Nice build I especially love the compression fittings, they give such a clean look. Are those bitspower fittings?
thx
Thanks :)Quote:
Originally Posted by Trigger5521
I unfortunatately dont know bitspower, they are normal screw on fittings :
http://www.aquatuning.de/product_inf...ting-G1-4.html
Final Pics of Koen Server!:
http://i2.photobucket.com/albums/y32.../Final2/01.jpg
http://i2.photobucket.com/albums/y32.../Final2/02.jpg
http://i2.photobucket.com/albums/y32.../Final2/03.jpg
http://i2.photobucket.com/albums/y32.../Final2/04.jpg
http://i2.photobucket.com/albums/y32...r/Final/08.jpg
Also Modblog Here!