Dual Core Opteron Thread #2

Printable View

Show 100 post(s) from this thread on one page

08-29-2006, 12:32 AM
likewhoa

Quote:

Originally Posted by gearhead364

I plan on lowering volts from 1.52 to around 1.4-1.45 and I also plan on upgrading the two 120's that came with my Lian Li. Any other suggestions on lowering temps, without removing IHS(got to remember that I am new to this)?

It's normal for those chips at those steppings to do 3Ghz @ 1.5v+ I wouldn't worry until you get to 1.67v and up and load temps of >50C, just keep it at 40-45C on full load and <1.67v.
1.57v is not a bad thing as most people don't keep their systems longer than 5 years anyways.

If you plan on putting a waterblock on the chip I would recommend taking the IHS off :D Just do your research and you'll be fine, you're on one of the best forums for it.

good luck.

P.S buy this to replace your chipset fan with the vc-re chipset fan at: http://store.yahoo.com/cgi-bin/clink...Fb+vc-re.html+
& I would mount a small 97mm fan over your pwm area to keep those temps down. also some good cable management can help some more in lowering temps. last but not least,. buy a giant fridge and make that your computer room, atleast you won't have to go far for the beer ;)
08-29-2006, 02:53 AM
HARDCORECLOCKER

:D http://xtremesystems.org/forums/showthread.php?t=113579

:toast:
08-29-2006, 11:43 AM
vudoodoodoo

Got 0610 DPMW's from newegg. Hope they're good. :toast:
08-29-2006, 12:22 PM
vudoodoodoo

308x9 at stock voltage. So far so good... only 5min of prime though. :o
08-29-2006, 09:23 PM
Peter949

When did you get your 610?
08-30-2006, 02:14 AM
vudoodoodoo

Ordered on Monday.
08-30-2006, 09:27 AM
vudoodoodoo

God damn temps are high! Especially Core1. I think it's really bad ISH/die contact.
08-30-2006, 04:31 PM
markr

Quote:

Originally Posted by vudoodoodoo

God damn temps are high! Especially Core1. I think it's really bad ISH/die contact.

What mem controller did you get?
08-30-2006, 04:37 PM
phi|os

Quote:

Originally Posted by likewhoa

last but not least,. buy a giant fridge and make that your computer room, atleast you won't have to go far for the beer ;)

Quite literally, this is the best of ideas to come from the XS forums to date:clap: :clap:
08-30-2006, 06:54 PM
vudoodoodoo

Quote:

Originally Posted by markr

What mem controller did you get?

Mem controller? I'm teh noob @ AMD lol.

Core#1 is 10C higher than Core#2 under load according to Core Temp. 60C+! :(
Core#1 craps out so fast. Gotta keep trying till I mount my Storm perfectly for both cores.
08-30-2006, 07:08 PM
itznfb

its an 0610, so it has the BB mem controller
08-31-2006, 12:07 AM
niexa77

1 Attachment(s)

What does everyone think of the core temps?

at 250x11 it only needs 1.4 x 104.8% (1.42 in win)
39-41 deg load CPU temp (depending on ambient)

to get 252 x 11 i need 1.425 x 104.8% (1.56 in win)
as you can see, 46 CPU and core1=60 core2=58!?!

havn't used everest to get core temps before, but it seems very high and seems the difference between the two(CPU and the cores) is quite large too...
08-31-2006, 01:38 AM
likewhoa

Quote:

Originally Posted by phi|os

Quite literally, this is the best of ideas to come from the XS forums to date:clap: :clap:

thank you very much, but usually I just tell people to move to antartica to overclock :D
08-31-2006, 02:24 AM
vudoodoodoo

7hrs is "stable" enough for me for now.
http://img350.imageshack.us/img350/2515/330uf5.th.jpg

Gonna mess around w/ 8 multi.
08-31-2006, 04:17 AM
itznfb

my cores sit at 60c all day long. but my regular temp apps read about 48c. i don't have problem with the core being 60c.
08-31-2006, 04:18 AM
likewhoa

Quote:

Originally Posted by itznfb

my cores sit at 60c all day long. but my regular temp apps read about 48c. i don't have problem with the core being 60c.

what is your rig now, I don't see a sig on you thought you had one before but meh.
08-31-2006, 08:05 AM
markr

Anybody know how accurate core temps are in A64info?

EDIT: seems to be spot on with Core Temp. AMB temp of case is 23c btw.

http://usera.imagecave.com/Markiz/temps3.bmp.jpg
08-31-2006, 08:36 AM
vudoodoodoo

Quote:

Originally Posted by itznfb

my cores sit at 60c all day long. but my regular temp apps read about 48c. i don't have problem with the core being 60c.

I'm on water though. Was hoping that it would be lower.
Well 8 multi wasn't that great. Sticking w/ 330x9. Time to sell the other 0610 I have... or just return it.
08-31-2006, 01:13 PM
Dagalidis

Just a validation....

http://www.thelab.gr/attachment.php?s=&postid=432964

http://valid.x86-secret.com/show_oc?id=117274

On Simple Water @ Naked CPU
08-31-2006, 03:22 PM
Dagalidis

New Try... :D

http://valid.x86-secret.com/ccpuz.php?id=117304

http://valid.x86-secret.com/show_oc?id=117304

And just a new Screen of Death...

http://www.thelab.gr/attachment.php?s=&postid=433006

Naked Cpu on Water
08-31-2006, 03:23 PM
itznfb

Quote:

Originally Posted by likewhoa

what is your rig now, I don't see a sig on you thought you had one before but meh.

same rig i had before:
AMD Opteron 165
CCBBE 0610DPMW @ 2950 @ 1.425v
Thermaltake Big Typhoon w/Panaflo 114cfm
MSI K8N Diamond Plus 7220/30A
OCZ4661024PFDC-K 3-4-4-8-1T @ 218MHz
XFX 7900GT Extreme 670/820 @ 1.5v

just replaced the sig with folding stats
_________________________________________
@Dagalidis nice clocks :clap:
08-31-2006, 04:19 PM
niexa77

Quote:

Originally Posted by Dagalidis

And just a new Screen of Death...

http://www.thelab.gr/attachment.php?s=&postid=433006

Naked Cpu on Water

sell you my idneys for that opty...

EDIT: kidneys :D
08-31-2006, 05:24 PM
vudoodoodoo

Nice opty. I think my temps are holding me back. WB is too heavy for a 2 hole rention stystem. It's tilted towards the bottom slightly I think.
08-31-2006, 06:40 PM
likewhoa

Quote:

Originally Posted by Dagalidis

Just a validation....

http://www.thelab.gr/attachment.php?s=&postid=432964

http://valid.x86-secret.com/show_oc?id=117274

On Simple Water @ Naked CPU

what stepping is that you got there? looks like a CCBBE
08-31-2006, 06:41 PM
likewhoa

Quote:

Originally Posted by vudoodoodoo

Nice opty. I think my temps are holding me back. WB is too heavy for a 2 hole rention stystem. It's tilted towards the bottom slightly I think.

what are your idle temps?
you might want to add some spacers to keep the block straight and some putty on the cpu to get a better grip.

Show 100 post(s) from this thread on one page