Printable View
yeah, i have one *points at sig*Quote:
Originally Posted by likewhoa
does 2.95@1.515, mainly asking if anyone knows which chip will tend to work better with 4 x 512mb dimm's (i know nothings certain when using batch codes to make performance forecasts)
does anyone have either a: ccbwe or a ccbbe opty and is running 4 x 512 dimm's?
results? much worse compared to 2 x dimms? if you have one of each, much diff between the bwe and the bbe?
i'd have to say the ccbbe 0610 would be the best for a 4x512 mem config. considering its the strongest and most consistent.
My CCBBE 0617 can run 4 X 512 dimms 1T but not overclocked by much. Overclocked I have to run 2T. This was using Corsair TCCD based XMS 3200XL Pro's. Never tried it using BH-5 based modules. I'd have to say the CCBBE memory controller is you best out. Gonna miss this chip, but its time to part with AMD 939 as my game pc.
cpu not clocked much? or ram not clock much? or ...Quote:
Originally Posted by The Nemesis
:( niether? :(
whats on the cards? mobo and cpu change on the gamestation? or complete swap over with the conroe?
Ram not clocked much. Cpu was @ 2.9ghz ram was on some crazy divider that had it down to 203 or something. I don't remember. Changing gamestation over to conroe. Got 6600 just trying to decide whether or not to wait for better sli board or go with asus se.Quote:
Originally Posted by niexa77
yea checkout Praz from DFI-Street's results. he did 339x9 with 4Gig of RAM 4x1Gig sticks I bet 4x512 sticks will do even better.Quote:
Originally Posted by niexa77
The Nemesis I broke 336x9 on my opty at 1.57v :)
http://weboperative.com/gallery/qdig...per-166ram.png
Nice, I still think the 0617 will be one of the best performing dual 165's out there. Especially when the weather cools down and we see what they can do in winter. That said, the conroe chips are scoring 2800 or better in the 3DMark06 cpu test. Most I can get is 2295 using bh-5, tight timings, & above 3 GHz. With that said the opty in my opinion is no longer the best gaming cpu. Conroes seem to overclock like mad just as the opty's do. All of my remaining systems will be socket 939 based pc's due to the price versus performance ratio since AMD dropped their prices. But my gaming rig has to be top tier.Quote:
Originally Posted by likewhoa
Anyone know what monarch is giving out lately?
I totally agree, but Opteron do perform better at other task... hence why Dreamworks uses Opterons in their render farms. I'm more into Graphics/3d then Gaming. I make would make the game charactor but hardly play them :DQuote:
Originally Posted by The Nemesis
I think I might put a peltier under my waterblock or buy The Swiftech MCW5002-64T� Liquid Cooled Thermoelectric Block.
i updated the db today. it will be the last update to the dc opty db.
I hope I m not late -my last results as well:)
http://img160.imageshack.us/img160/7...155vdo9.th.jpg
http://img502.imageshack.us/img502/7...u10hab9.th.jpg
well, hopefully soon you'll be able to enter your results online.
Anyone removed the IHS on a Opty 170 CCB1E 0609 FPAW? How much did you manage to lower the temps?
think theres a few guys here:Quote:
Originally Posted by LenniZ
http://www.dfi-street.com/forum/showthread.php?p=539662
that did stripped thier 170's... certainly some results from opty's... seemed to be between 3 and 12 degree's celcius...
naked and collaboratory liquid pro (sp?) makes a mean combo...
I have optaron cpu, how do I overclock it?
...Just kidding guys, first post and all:)
I just got my hands on a 170 CCB1E 0550VPMW. They certainly are a rather hot chip... poping the top fixed that. Now I must say first impressions are great. The thing dual Primed 10hrs+ at 2.9GHz last night, and is currently priming at 3G:D.
Before ISH removal, 2.9 was a no go, as the extra vCore needed created too much heat. The de-capping dropped a good 10 degrees of the temps, even more on what was showing as the hotter core in 'CoreTemp Beta'.
Putting my old naked 3700 to shame I must say.
Edit. as a note, it's running under a DD TDX, D5 pump, and BI GTS360. I'll get a full spec sig made up.
Welcome zarathrustra, and nice work with that one :P looks like a beautyQuote:
Originally Posted by zarathrustra
on another note, you post inspired me to get coretemp BETA and gcpuid, quite nifty little programs... gcpuID gives you the TCaseMax (57degC in my case) and TDP (46.9w)... anyone understand its relevance? was running boinc when i had those values, \
EDIT: and got the same results after closing boinc and refreshing(and restarting gcpuID) still baffled
scanned the site a bit, and googles an old discontinued prog by the same author designed for the sole purpose of finding out these two values... still dont get it..
i'm glad i chose the 165 over the 4400+...
CCBBE 0610DPMW
need to update my sig, but it's on a dfi ultra-d and everything else is in the sig still
http://img144.imageshack.us/img144/5143/2950du9.th.png
nice catch.. that opty should do 3000Mhz just fine at 1.5v :)Quote:
Originally Posted by Kingsfan
if you gonna go h2o on it, take of that fat IHS first ;)
that is on water, haha but it isn't nekked yet...maybe when i get my new case
I've got this thing nice and stable at 3.0GHz, but I want to try and get the vCore down a bit.
OCDB Entry post
Hey guys, I would like to know that which is the best/recommended stepping for the opteron cpu?
Quote:
Originally Posted by Intel P4
look at the first post on this thread ;)
but I would suggest getting any of the CCBBE 06* steppings which are capable of 3ghz and up.
How well do you expect a CCB1E 0609FPMW to do on my Ultra-D with 2x512mb TCCD DDR600? (repost from other opty thread)
I've got it on a TTBT, should I remove the IHS?
The very least will be 2.8ghz @ 1.4v with air cooling once you figure out what read preamble, max async latency & drive strengths the memory controller likes with your ram clocked that high or using divider.Quote:
Originally Posted by LordofDoom
showing my ignorance here, but i thought all the opty DC's were toledo's? any word on what the denmarks are like?