EP45-UD3P

Printable View

Show 100 post(s) from this thread on one page

02-21-2009, 01:19 PM
WhiteFireDragon

are there any waterblocks for these boards? i think i remembering reading about a custom ordered one but i my memory could be playing tricks on me with another mobo.
02-21-2009, 01:30 PM
radaja

im pretty sure jor3lbr,put together a group buy,for some waterblocks.
02-21-2009, 06:44 PM
OC Nub

The problem I was having with the freezing was human error, a setting I didn't change in the BIOS after defaulting it to flash. GFX adapter was set to PCI by default not PEG/PCIExe. I never thought to look until someone asked me if it was set to PEG. No more freezing issues.
02-21-2009, 08:03 PM
bobreece

Quote:

Originally Posted by Touche

Version 12 is the latest. Download the latest trial HERE and see if it works.

got it sorted just backing up to external drive instead but cheers m8
02-21-2009, 08:20 PM
bobreece

Quote:

Originally Posted by OC Nub

The problem I was having with the freezing was human error, a setting I didn't change in the BIOS after defaulting it to flash. GFX adapter was set to PCI by default not PEG/PCIExe. I never thought to look until someone asked me if it was set to PEG. No more freezing issues.

mine is set to pci but i have had no frezzing problems but should change it to the other setting ??
02-21-2009, 09:26 PM
DOM.

1 Attachment(s)

any one tryed putting on a MCW30 Chipset waterblock on the NB ?

here's what mine looks like had to make it fit, 60mm was max for the MCW30 guess the holes where lil wider :rofl:

http://i199.photobucket.com/albums/a...IMG_2661-1.jpg

also why do i have to use more CPU Termination and MCH Core then what some of you guys are using :confused:
02-22-2009, 04:22 AM
simoorta

I have this mainboard, the UD3R version rev 1.1, but this mobo doesn't go as it must do.

The mobo doesn't go over 430fsb with ram at 5:6.
My CPU is an E8400 C0, and the RAM is cellshock pc8500 2GB with Micron D9GMH.

With RAM at 1:1 the mobo goes over 430fsb but it doesn't go over 470 and it is strange because this happens with a lot of volts, and the GTL Reference are correctly set.

This is very strange and the BIOS is the F7a.

The mobo everytime I set the Dram Frequency over 1066 tell me "Overclocking failed" with a never ending reboot(a boot loop).

With 1 module of ram the mobo goes better but doesn't as it must do.

PS: Sorry for m bad english, I'm Italian.
02-22-2009, 06:33 AM
Touche

Try manually setting PL to 12 or higher.
02-22-2009, 07:10 AM
asap

Quote:

Originally Posted by Touche

Try manually setting PL to 12 or higher.

:up:.. and also try with lower MCHref for higher fsb
02-22-2009, 07:13 AM
systemviper

Hi, i am firing up my monster mobo again for a few more runs. What is the current - and the best bios today for the ud3p.

thanks in advance.
02-22-2009, 07:33 AM
simoorta

Quote:

Originally Posted by Touche

Try manually setting PL to 12 or higher.

But the P45 must goes well at lower PL than 12.
It is strange.:D

But lower PL on ud3r 1.1 are bugged?:confused:
02-22-2009, 09:43 AM
OC Nub

Quote:

Originally Posted by bobreece

mine is set to pci but i have had no frezzing problems but should change it to the other setting ??

I guess if it works don't fix it but it helped with the problem I was having. It didn't freeze with the ATI cards. Maybe the GTX takes more juice to run, I dunno :shrug:.
02-22-2009, 12:52 PM
simoorta

Quote:

Originally Posted by simoorta

But the P45 must goes well at lower PL than 12.
It is strange.:D

But lower PL on ud3r 1.1 are bugged?:confused:

Guys??:confused:
02-22-2009, 01:21 PM
DOM.

whats PL ? :rofl:
02-22-2009, 01:29 PM
systemviper

Looks Like there is a NEW BIG BOY in town, this is totally untweeked, at aroudn 1.52v and ...... :rolleyes:

Tonight it's susposed to go to -7c so that should make for some fun benching, :shrug:

CPUZ

http://img.techpowerup.org/090222/cpuz5g-1.jpg
02-22-2009, 01:36 PM
fatguy1992

OMG thats awesome :eek:

How much do they cost?

I need one :p:
02-22-2009, 02:45 PM
simoorta

Quote:

Originally Posted by Dom7184

whats PL ? :rofl:

The PerformanceLevel(PL), or better, tRD, is a northbridge's latency.

Quote:

Originally Posted by systemviper

Looks Like there is a NEW BIG BOY in town, this is totally untweeked, at aroudn 1.52v and ...... :rolleyes:

Tonight it's susposed to go to -7c so that should make for some fun benching, :shrug:

CPUZ

Congrats to him!
Well done.
02-22-2009, 02:54 PM
DOM.

Quote:

Originally Posted by simoorta

The PerformanceLevel(PL), or better, tRD, is a northbridge's latency.

Congrats to him!
Well done.

:shrug: still dont know much about this mobo but i got the WR for the X3350:D
02-22-2009, 04:00 PM
ghost_recon88

This board is insane, I've never seen another board that clocks quads like it does :eek: It does 4GHz with 1.232v as well :cool:

http://i631.photobucket.com/albums/u...g?t=1235346281
02-22-2009, 05:17 PM
Jor3lBR

Quote:

Originally Posted by systemviper

Looks Like there is a NEW BIG BOY in town, this is totally untweeked, at aroudn 1.52v and ...... :rolleyes:

Tonight it's susposed to go to -7c so that should make for some fun benching, :shrug:

Yes Viper when we will be able to get hold on these new chips?! :up:
02-22-2009, 07:52 PM
nugzo

Quote:

Originally Posted by Jor3lBR

After a week of fun in the Extreme, now it's time to apply some gained skills on the UD3P :up:

What I thought it was impossible is so far holding strong on my UD3P. This board and cpu just keep going and going! The hard part is to use the least amount of volts for the cpu and highest mem strap and timings possible.

Noticed I changed voltages from Team Xtreem to G.Skills a bit but that was only because of larger RAM used for testing.

All this in cheap water cooling system.

I try to send as many pics of the entire testing process (beginning/middle/ end) because I noticed many fake SS's around the web of people adjusting voltages and/or cutting blend tests as customs trying to deceive people here...

I will post more results and templates during the next week, this was very very very hard to achieve and needed some voodoo magic to work! :up:

Now lets move on to get closer to 5000Mhz stable ;)

...

You still gonna post your 4500 stable template? :D I'm dyin to give it a try.
02-22-2009, 08:17 PM
coop

4gb
[IMG]http://img518.imageshack.us/img518/6705/75hrs.jpg[/IMG]
2gb
[IMG]http://img410.imageshack.us/img410/3996/47764491.jpg[/IMG]
02-23-2009, 05:47 AM
simoorta

Quote:

Originally Posted by Touche

Try manually setting PL to 12 or higher.

I've tried it, but is the same.

This rev. 1.1. goes very bad. I think is bugged.

If tou have resolutions for my problem post them.:)
02-23-2009, 08:42 AM
xbiusx

Quote:

Originally Posted by coop

4gb
[IMG]http://img518.imageshack.us/img518/6705/75hrs.jpg[/IMG]
2gb
[IMG]http://img410.imageshack.us/img410/3996/47764491.jpg[/IMG]

How can you do that? I mean with this voltages!!!! I`m really interested in your help to reach around 4500...Please see my post below
02-23-2009, 08:46 AM
xbiusx

My new settings! But i want more and i know my chip and board can do that, just little tweak.
http://i11.photobucket.com/albums/a1...l_settings.jpg

Show 100 post(s) from this thread on one page

** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

Official Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P